mGalaxy | Emulator tutorial
- To set the emulator to fullscreen:
Start WinApe, go to 'Setting' & 'Display' & check 'Hide Control Panel', 'Hide Menus' (you can even check 'No Right-Click Menu' if you want to).
Press 'F10' to turn on fullscreen, then Alt+F4 to exit and save your settings (there is no 'Full Screen' option in the settings, so this is the way to save the last screen state to the .ini file).
Edit values in 'WinAPE.ini' file: Full Screen=true, Hide Menus=true, No Right Click=true, Hide Panel=true.
- To quit emulator using the ESC key:
Amstrad CPC
- To quit emulator using the ESC key:
When emulating a computer system, MESS considers that you're pressing the 'ESC' key from the emulated system keyboard!
You'll have to first press the 'ScreenLock' key, then the 'ESC' key to quit MESS...or
Amstrad GX4000
Atari800Win
- To quit emulator using the ESC key:
Only possible through an AutoIt script.
Nothing to do!
Atari 5200
Nothing to do!
Nothing to do!
Atari 2600
Nothing to do!
- To set the emulator to fullscreen:
Start ProSystem, go to 'Options' & 'Display'
Check 'FullScreen', set 'Modes' and check 'Stretched'
- To quit emulator using the ESC key:
Start ProSystem, go to 'Options' & 'Input' & 'User..'.
Choose a key for 'Menu' shortcut (other than the default 'ESCAPE' one) and set 'Exit' shortcut to 'ESCAPE'. Click 'OK'
Atari 7800
- To quit emulator using the ESC key:
When emulating a computer system, MESS considers that you're pressing the 'ESC' key from the emulated system keyboard!
You'll have to first press the 'ScreenLock' key, then the 'ESC' key to quit MESS...or
Project Tempest
Project Tempest will only work with mGalaxy - To set the emulator to fullscreen:
Start Project Tempest, go to 'Setting' & 'Settings...' & 'Video' tab and check 'Fullscreen mode'.
Virtual Jaguar
- To set the emulator to fullscreen:
Start Virtual Jaguar, go to 'Jaguar' & 'Configure' & 'General' tab and check the 'Start Virtual Jaguar full screen' checkbox.
- To quit emulator using the ESC key:
Atari Jaguar
- To quit emulator using the ESC key: nothing to do!
- To start in full-screen mode: launch 'Handy' & 'Options' menu & select 'Normal Mode (Full Screen)', then quit 'Handy'.The screen mode will be retained for next session.
Nothing to do!
- To change the fullscreen type:
Open 'mednafen-09x.cfg' file, search for 'lynx.stretch' and edit the following value.
This value can be:
0 : Disabled
full : Full-screen stretch, disregarding aspect ratio.
aspect : Aspect Preserve (Full-screen stretch as far as the aspect ratio (in this sense, the equivalent xscalefs == yscalefs) can be maintained)
aspect_int : Aspect Preserve + Integer Scale (Full-screen stretch, same as &aspect& except that the equivalent xscalefs and yscalefs are rounded down to the nearest integer)
aspect_mult2 : Aspect Preserve + Integer Multiple-of-2 Scale (Full-screen stretch, same as &aspect_int&, but rounds down to the nearest multiple of 2)
Atari Lynx
- To quit emulator using the ESC key:
Start Steem, click on the'Shortcut' icon & click on the 'Default' icon & click the 'Add New' button & Edit that new line that way: 'ESC' key = 'Exit Steem'.
Nothing to do!
Bally Astrocade
Nothing to do!
- To change the fullscreen type:
Open 'mednafen-09x.cfg' file, search for 'wswan.stretch' and edit the following value.
This value can be:
0 : Disabled
full : Full-screen stretch, disregarding aspect ratio.
aspect : Aspect Preserve (Full-screen stretch as far as the aspect ratio (in this sense, the equivalent xscalefs == yscalefs) can be maintained)
aspect_int : Aspect Preserve + Integer Scale (Full-screen stretch, same as &aspect& except that the equivalent xscalefs and yscalefs are rounded down to the nearest integer)
aspect_mult2 : Aspect Preserve + Integer Multiple-of-2 Scale (Full-screen stretch, same as &aspect_int&, but rounds down to the nearest multiple of 2)
Bandai WonderSwan
CPS3 Emulator
This emulator requires some informations to work properly.
- Give the path to the roms folder:
Inside the emulator folder, open the file named 'emulator.ini'.
Locate this line, remove the starting semicolon and give the actual path to your roms folder.
You should end up with something like this: Dir1=d:\Emulators\Capcom CPS-3\roms
- Give the full screen info for your monitor:
Inside the same 'emulator.ini' file, edit the follwing lines to match your monitor resolution
FullScreenWidth=640
FullScreenHeight=480
- Force fullscreen start:
Inside the same 'emulator.ini' file, set AutoFull=0 to AutoFull=1
Capcom CPS-3
- To quit emulator using the ESC key:
Start 'EmuHawk.exe' & 'Config' menu & 'Hotkeys...' & On the 'General' tab, find 'Exit Program' and choose 'Escape' in the dropdown menu.
- To quit emulator using the ESC key:
Edit 'blueMSX.shortcuts' (in &blueMSX/Shortcut Profiles& folder) and change the value of 'quit' to 'quit=001B0001'
- To set the emulator to fullscreen:
Start 'ColEm.exe', load a game rom, press 'Alt-Enter' (or go to 'Video' menu & 'Full Screen Mode').
Quit by pressing the 'Esc' key.
This setting is memorized and ColEm will always start fullscreen from now.
Nothing to do!
Coleco Colecovision
- First, start WinVICE, go to 'Settings' and click 'Save current settings'.
- To bypass the exit confirmation box:
Start WinVICE > 'Settings' menu > Uncheck 'Save settings on exit' the 'Save current settings' again
Edit the 'vice.ini' file and edit values: ConfirmOnExit=0
- To quit emulator using the ESC key:
Edit 'win_shortcut.vsc' (in &WinVice/C64& folder) and add this line to the table (for example just after 'ALT 0x2D IDM_EDIT_PASTE Ins'): KEY 27 IDM_EXIT X
Commodore 64
- Before starting, be sure to be familiar with the 'Configuration' file system used by WinUAE.
- mGalaxy is waiting for a 'mGalaxy.uae' config file to be present in the same folder than the main application. Start WinUAE, go to 'Settings' & 'Paths', set the 'Configuration files' path to the main WinUAE folder path. Then, go to 'Settings' & 'Configurations', create a new file names &mGalaxy.uae& and click the 'Save' button.
(After completing the modifications below, go back to that window and save it again)
- To quit emulator using the ESC key:
Go to 'Host' & 'Input', choose one of the configuration (#1, #2 or #3).Set it to 'PS/2 PC/AT Extended Keyboard'. Be sure that 'Device enabled' checkbox is checked.
Browse to the very top of the keys list and select the 'ESCAPE' line.
Click the dropdown menu displaying 'ESC' (just beneath the keys list) and select 'Quit emulator'
- To set the emulator to fullscreen:
Go to 'Host' & 'Display', set your 'Fullscreen' resolution. Set 'Settings' & 'Native' to 'Fullscreen'
- To hide the GUI at startup:
Go to 'Host' & 'Miscellaneous', uncheck 'Show GUI on startup'
Commodore Amiga
- Before starting, be sure to be familiar with the 'Configuration' file system used by WinUAE.
- mGalaxy is waiting for a 'mGalaxy(CD32).uae' config file to be present in the same folder than the main application. Start WinUAE, go to 'Settings' & 'Paths', set the 'Configuration files' path to the main WinUAE folder path. Then, go to 'Settings' & 'Configurations', create a new file named &mGalaxy(CD32).uae& and click the 'Save' button.
(After completing the modifications below, go back to that window and save it again)
- To quit emulator using the ESC key:
Go to 'Host' & 'Input', choose one of the configuration (#1, #2 or #3).Set it to 'PS/2 PC/AT Extended Keyboard'. Be sure that 'Device enabled' checkbox is checked.
Browse to the very top of the keys list and select the 'ESCAPE' line.
Click the dropdown menu displaying 'ESC' (just beneath the keys list) and select 'Quit emulator'
- To set the emulator to fullscreen:
Go to 'Host' & 'Display', set your 'Fullscreen' resolution. Set 'Settings' & 'Native' to 'Fullscreen'
- To hide the GUI at startup:
Go to 'Host' & 'Miscellaneous', uncheck 'Show GUI on startup'
Commodore Amiga CD32
- Before starting, be sure to be familiar with the 'Configuration' file system used by WinUAE.
- mGalaxy is waiting for a 'mGalaxy(CDTV).uae' config file to be present in the same folder than the main application. Start WinUAE, go to 'Settings' & 'Paths', set the 'Configuration files' path to the main WinUAE folder path. Then, go to 'Settings' & 'Configurations', create a new file named &mGalaxy(CDTV).uae& and click the 'Save' button.
(After completing the modifications below, go back to that window and save it again)
- To quit emulator using the ESC key:
Go to 'Host' & 'Input', choose one of the configuration (#1, #2 or #3).Set it to 'PS/2 PC/AT Extended Keyboard'. Be sure that 'Device enabled' checkbox is checked.
Browse to the very top of the keys list and select the 'ESCAPE' line.
Click the dropdown menu displaying 'ESC' (just beneath the keys list) and select 'Quit emulator'
- To set the emulator to fullscreen:
Go to 'Host' & 'Display', set your 'Fullscreen' resolution. Set 'Settings' & 'Native' to 'Fullscreen'
- To hide the GUI at startup:
Go to 'Host' & 'Miscellaneous', uncheck 'Show GUI on startup'
Commodore Amiga CDTV
- First, start WinVICE, go to 'Settings' and click 'Save current settings'.
- To start game fullscreen:
Edit the 'vice.ini' file and edit (or add if missing): FullscreenEnabled=1
- To bypass the exit confirmation box:
Start WinVICE > 'Settings' menu > Uncheck 'Save settings on exit' the 'Save current settings' againOREdit the 'vice.ini' file and edit (or add if missing): ConfirmOnExit=0
- To quit emulator using the ESC key:
Edit 'win_shortcut.vsc' (in &WinVice/C64& folder) and add this line to the table (for example just after 'ALT 0x2D IDM_EDIT_PASTE Ins'): KEY 27 IDM_EXIT X
Commodore VIC-20
- To start game fullscreen:
Open MFME 'Preferences' window. Un-check the 'Start in Manager' checkbox and select either "Borderless Full Screen" or "Borderless Full Screen Max" for 'Screen Mode'
- To quit emulator using the ESC key:
Open MFME 'Preferences' window. Check the 'Exit on ESC' checkbox
Fruit Machine
DEmul will only work with mGalaxy
- To set the emulator to fullscreen:
Start DEmul, go to 'Config' & 'Video' choose your monitor resolution and check the 'Use Fullscreen' checkbox.
Nothing to do!
GCE Vectrex
- For each game:
1) The rom images have to be zipped in a single file (ex.: lair.zip)
2) Put that .zip file in a 'roms' folder, in the same directory than 'daphne.exe'
3) Put the framefile (named like the rom file, ex.: lair.txt) in a 'framefile' folder, in the same directory than 'daphne.exe'
(Edit the first line of this framefile,
it has to point to the directory you put the movies into)
Nothing to do!
Nothing to do!
Mattel Intellivision
Use 'cmd.exe' (or a copy of it) as 'emulator' (it is located in Windows & system32)
Your 'roms' will be the shortcuts to your applications/games.
(Right click your '.exe' app/game and select 'Create Shortcut'. Then move it in the folder you specified in Galaxy Runway as being the 'Microsoft Roms' folder)
Microsoft [Applications]
Nothing to do!
[Video Player]
- To quit emulator using the ESC key:
Edit 'blueMSX.shortcuts' (in &blueMSX/Shortcut Profiles& folder) and change the value of 'quit' to 'quit=001B0001'
- To quit emulator using the ESC key and set the emulator window to fullscreen:
Inside the' OpenMSX' application folder, create a text document (.txt) named 'script'. Open it and add these 2 lines. Save:
set fullscreen on
bind ESCAPE &quit&
Nothing to do!
FinalBurn Alpha
You'll have to specify the rom path both in FinalBurn Alpha AND mGalaxy_Runway
Multi-system
[FB Alpha]
Nothing to do!
Be sure to follow 'The Mame case' tutorial () to benefit from all the functionalities of MAME!
Multi-system [MAME]
You'll have to specify the rom path both in Nebula AND mGalaxy_Runway
- To quit emulator using the ESC key:
- To set the emulator to fullscreen:
Start 'nebulaconfig.exe' and check 'Fullscreen GUI' checkbox (or edit value in 'nebula.ini' file &
'GUIMode=0')
Multi-system [Nebula]
Nothing to do!
Multi-system [pSxMAME]
You'll have
to specify the romp path both in Raine (or 'raine32_sdl.cfg' file) AND in mGalaxy_Runway
Multi-system [Raine]
TeknoParrot
Use 'cmd.exe' (or a copy of it) as 'emulator' (it is located in Windows & system32).
Your 'roms' will be the shortcuts to your games and we're going to use an mGalaxy utility application to create them.
Launch 'TeknoParrotUI.exe' and set games then quit.
Download 'TeknoParrot shortcut generator.exe' Launch 'TeknoParrot shortcut generator.exe', pick path to the TeknoParrotUI application then choose the destination folder for the shortcuts to be created (this can be the same folder than your TeknoParrot games folder)
Click 'Create shortcut files'...your shortcuts are now created.
Launch mGalaxy_Runway and create a 'Multi-system [TeknoParrot]' system.
Click the 'App path' button and select the 'cmd.exe' application.
Click the 'Rom path' button and select the folder you chose in the previous step to save your shortcuts.
Click the 'Save' button...you're ready to play!!
Multi-system [TeknoParrot]
You'll have to specify the rom path both in Winkawaks (or WinKawaks.ini) AND mGalaxy_Runway
- To quit emulator using the ESC key:
Multi-system [WinKawaks]
You'll have to specify the romp path both in 'zinc.cfg ' (--roms-directory=...) AND in mGalaxy_Runway
- To set the emulator to fullscreen:
Edit the 'renderer.cfg' file (FullScreen = 1)
Multi-system [Zinc]
MagicEngine
Start MagicEngine. When the 'MagicEngine setup' window opens, check 'Fullscreen', set the resolution and un-check 'Always show this setup window at startup'
Nothing to do!
NEC PC Engine
MagicEngine
Start MagicEngine. When the 'MagicEngine setup' window opens, check 'Fullscreen', set the resolution and un-check 'Always show this setup window at startup'
Nothing to do!
- To change the fullscreen type:
Open 'mednafen-09x.cfg' file, search for 'pce.stretch' and edit the following value.
This value can be:
0 : Disabled
full : Full-screen stretch, disregarding aspect ratio.
aspect : Aspect Preserve (Full-screen stretch as far as the aspect ratio (in this sense, the equivalent xscalefs == yscalefs) can be maintained)
aspect_int : Aspect Preserve + Integer Scale (Full-screen stretch, same as &aspect& except that the equivalent xscalefs and yscalefs are rounded down to the nearest integer)
aspect_mult2 : Aspect Preserve + Integer Multiple-of-2 Scale (Full-screen stretch, same as &aspect_int&, but rounds down to the nearest multiple of 2)
NEC PC Engine CD
Nothing to do!
MagicEngine
See 'Nec PC Engine'
Nothing to do!
NEC SuperGrafx
MagicEngine
See 'Nec PC Engine'
Nothing to do!
NEC TurboGrafx-16
- To quit emulator using the ESC key:
- To quit emulator using the ESC key:
(If you're using Project64 v1.6 you don't need a script if you replace the executable with this one: )
- To set the emulator to fullscreen:
Start Project64, go to 'Options' & 'Settings...' & 'Options' and check 'On loading a ROM go to full screen'.
Nintendo 64
- To quit emulator using the ESC key & set the emulator to fullscreen:
Nintendo DS
- To prevent window from opening a security warning window (thus blocking mGalaxy itself in the launching process):
Run Mesen standalone and when the security warning window shows, un-check the 'Always ask before opening this file' checkbox (or globally disable "Open File - Security Warning" Message )
- To quit emulator using the ESC key:
Open Mesen > 'Options' menu > Preferences > 'Shortcut Keys' tab > Click on the 'Binding#1' field for 'Exit' and press the 'ESC' (Escape) key on your keyboard. Click 'OK' to close window.
- To set the emulator to fullscreen:
Start Nestopia, go to 'Options' & 'Preferences' and check 'Switch to fullscreen on startup'.
(or edit values in 'nestopia.xml' file: &start-fullscreen&yes&/start-fullscreen&)
- To avoid to confirm on Nestopia exit:
Start Nestopia, go to 'Options' & 'Preferences' and un-check 'Confirm exit'.
(or edit values in 'nestopia.xml' file: &confirm-exit&no&/confirm-exit&)
- To quit emulator using the ESC key:
Edit the 'nestopia.xml' configuration file that way:
&exit&ESC&/exit& (If you are not using an English version the key value may be different (for example 'Echap' in French)
&toggle-menu&Alt+X&/toggle-menu&
- To set the emulator to fullscreen:
Start VirtuaNES, go to 'Options' & 'Graphics' and choose a resolution compatible with your hardware.
Edit values in 'VirtuaNES.ini' file: LoadFullscreen=1
- To quit emulator using the ESC key:
First setup the emulator and controls the way you want them. Then, open 'virtuanes.ini' file and replace this line TBL00=2D4012 by this one TBL00=010001
Save the file. Right click on it and select 'Property'. In the 'General' tab, check 'Read Only' to prevent VirtuaNes to overwrite the settings. (So, if you want to change another setting inside this file later on, remember to uncheck it first and to do the whole procedure again)
- To set the emulator to fullscreen:
Start FCEUX, go to 'Config' & 'Video...' and check 'Enter full screen mode after game is loaded'.
(or edit values in 'fceux.cfg' file: SDL.Fullscreen = 1 )
- To quit emulator using the ESC key:
Start FCEUX, go to 'Config'& 'Map Hotkeys...' and double click 'Exit' and press 'ESC'.
(or edit values in 'fceux.cfg' file: SDL.HotKeys.Quit = 27 )
Nintendo FDS
See &Nintendo Wii&
Nintendo Gamecube
- To quit emulator using the ESC key:
VisualBoyAdvance
See &Nintendo GBA&
Nintendo GB
VisualBoyAdvance
- To quit emulator using the ESC key:
Start VisualBoyAdvance, go to 'Tools & Customize'.
In that window, assign ESCAPE key to 'FileExit' and Alt+X (or any other) key to 'FileToggleMenu'
- To set the emulator to fullscreen:
Start VisualBoyAdvance, go to 'Options' & 'Video' & 'Other Full Screen...'
Then, goto 'Options' & 'Video' & and check 'Fullscreen Stretch to fit'
(or edit values in 'vba.ini' file: video=7, fsWidth=1920, fsHeight=1080, stretch=1)
- To disable on-screen informations:
Start VisualBoyAdvance, go to 'Options' & 'Emulator' &and check 'Disable status messages'. Then go to 'Options' & 'Emulator' & 'Show Speed' and check 'None'
(or edit values in 'vba.ini' file:disableStatus=1, showSpeed=0)
- To hide the menu:
Start VisualBoyAdvance, go to 'Options' & 'Emulator' &and check 'Auto hide menu'.
(or edit values in 'vba.ini' file:autoHideMenu=1)
Nintendo GBA
VisualBoyAdvance
See &Nintendo GBA&
Nintendo GBC
- To prevent window from opening a security warning window (thus blocking mGalaxy itself in the launching process):
Run Mesen standalone and when the security warning window shows, un-check the 'Always ask before opening this file' checkbox (or globally disable "Open File - Security Warning" Message )
- To quit emulator using the ESC key:
Open Mesen > 'Options' menu > Preferences > 'Shortcut Keys' tab > Click on the 'Binding#1' field for 'Exit' and press the 'ESC' (Escape) key on your keyboard. Click 'OK' to close window.
- To set the emulator to fullscreen:
Start Nestopia, go to 'Options' & 'Preferences' and check 'Switch to fullscreen on startup'.
(or edit values in 'nestopia.xml' file: &start-fullscreen&yes&/start-fullscreen&)
- To avoid to confirm on Nestopia exit:
Start Nestopia, go to 'Options' & 'Preferences' and un-check 'Confirm exit'.
(or edit values in 'nestopia.xml' file: &confirm-exit&no&/confirm-exit&)
- To quit emulator using the ESC key:
Edit the 'nestopia.xml' configuration file that way:
&exit&ESC&/exit& (If you are not using an English version the key value may be different (for example 'Echap' in French)
&toggle-menu&Alt+X&/toggle-menu&
- To set the emulator to fullscreen:
Start VirtuaNES, go to 'Options' & 'Graphics' and choose a resolution compatible with your hardware.
Edit values in 'VirtuaNES.ini' file: LoadFullscreen=1
- To quit emulator using the ESC key:
First setup the emulator and controls the way you want them. Then, open 'virtuanes.ini' file and replace this line TBL00=2D4012 by this one TBL00=010001
Save the file. Right click on it and select 'Property'. In the 'General' tab, check 'Read Only' to prevent VirtuaNes to overwrite the settings. (So, if you want to change another setting inside this file later on, remember to uncheck it first and to do the whole procedure again)
- To set the emulator to fullscreen:
Start FCEUX, go to 'Config' & 'Video...' and check 'Enter full screen mode after game is loaded'.
(or edit values in 'fceux.cfg' file: SDL.Fullscreen = 1 )
- To quit emulator using the ESC key:
Start FCEUX, go to 'Config'& 'Map Hotkeys...' and double click 'Exit' and press 'ESC'.
(or edit values in 'fceux.cfg' file: SDL.HotKeys.Quit = 27 )
Nintendo NES
Locate the 'settings.cfg' file:
Windows XP: C:\Documents and Settings\YourUserName\Application Data\higan\
Windows 7 and later:
C:\Users\YourUserName\AppData\Roaming\higan\
- To set the emulator to fullscreen:
Edit value in 'settings.cfg' file: Video::StartFullScreen = true
- To quit emulator using the ESC key:
Edit value in 'settings.cfg' file: Hotkey::CloseEmulator = &KB0::Esc&
- To quit emulator using the ESC key:
- To set the emulator to fullscreen:
Start ZSNES, go to 'CONFIG' & 'VIDEO', choose your video settings then click on the 'SET' button. To finish, go to 'MISC' & 'SAVE CFG'.
Nintendo SNES
Red Dragon
- To quit emulator using the ESC key:
Only possible through a script (included in mGalaxy).
Nintendo Virtual Boy
- To set the emulator to fullscreen:
Start Dolphin, go to 'Options' & 'Graphics Settings', choose your fullscreen resolution and check the 'Use Fullscreen' checkbox.
- To quit emulator using the ESC key:
Start Dolphin, go to 'Options' & 'Hotkey Settings' and set the 'Stop' action to the 'Escape' key.
- To remove the exit confirmation:
Start Dolphin, go to 'Options' & 'Configure' & 'Interface' and uncheck the 'Confirm on stop' checkbox.
Nintendo Wii
- To quit emulator using the ESC key:Only possible through the AutoIt script.
- To quit emulator using the ESC key:
Extract the content of that file:
to your 4DO folder & Settings folder.
Launch 4DO, go to 'Options' & 'Configure Input...' and configure your other keyboard shortcut.
Panasonic 3DO
Nothing to do!
Nothing to do!
Philips Odyssey2
Visual Pinball
- To quit emulator using the ESC key:
Future Pinball
- To set the emulator to fullscreen:
Start Future Pinball, go to 'Preferences' & 'Video / Rendering Options' and check the 'Full Screen' checkbox.
You'll have to specify the rom path both in DEmul (or Demul.ini) AND mGalaxy_Runway
- To set the emulator to fullscreen:
Start DEmul, go to 'Config' & 'Video' choose your monitor resolution and check the 'Use Fullscreen' checkbox.
- To quit emulator using the ESC key:
Sammy Atomiswave
We will use 'cmd.exe' (or a copy of it) as 'emulator' (it is located in Windows/system32 folder).
Your 'roms' will be the shortcuts to your games and we're going to use an mGalaxy utility application to create them.
Launch 'scummvm.exe' and add games to it then quit.
Download 'ScummVM shortcut generator.exe' Launch 'ScummVM shortcut generator.exe', pick the path to the ScummVM application then the path to the destination folder where the shortcuts will be created (this can be the same folder as your ScummVM games folder)
Click 'Create shortcut files'...your shortcuts are now created.
Launch mGalaxy_Runway and create a 'ScummVM' system.
Click the 'App path' button and select the 'cmd.exe' application.
Click the 'Rom path' button and select the folder you chose in the previous step to save your shortcuts.
Click the 'Save' button...you're ready to play!!
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
- To quit emulator using the ESC key:
DEmul will only work with mGalaxy
- To set the emulator to fullscreen:
Start DEmul, go to 'Config' & 'Video' choose your monitor resolution and check the 'Use Fullscreen' checkbox.
Sega Dreamcast
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
- To remove 'decoration' around screen:
Start Fusion, go to 'Options' & 'Set Config...' & SMS/GG Tab and check 'GG Zoom' and 'GG FullSMS'.
(or edit values in 'Fusion.ini' file:GameGearZoom=1, GameGearFull=1)
Sega Game Gear
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
Not working (for now): Gens can't go full screen.
Nothing to do!
Sega Genesis
DEmul will only work with mGalaxy
- To set the emulator to fullscreen:
Start DEmul, go to 'Config' & 'Video' choose your monitor resolution and check the 'Use Fullscreen' checkbox.
Sega Hikaru
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
Sega MasterSystem
Model 2 Emulator
- To specify the roms'path (this emu doesn't allow mGalaxy to manage the path):
Edit 'Dir1' value in 'EMULATOR.INI' file. Example: Dir1=C:\Emulation\Model2\Roms
- To set the emulator to fullscreen:
Edit values in 'EMULATOR.INI' files: AutoFull=1, FullMode=4, FullScreenWidth=(your monitor's width), FullScreenHeight=(your monitor's height)
- To quit emulator using the ESC key:
Sega Model 2
Supermodel
Nothing to do!
Sega Model 3
You'll have to specify the rom path both in DEmul (or Demul.ini) AND mGalaxy_Runway
- To set the emulator to fullscreen:
Start DEmul, go to 'Config' & 'Video' choose your monitor resolution and check the 'Use Fullscreen' checkbox.
- To quit emulator using the ESC key:
- To set the emulator to fullscreen:
Edit value in 'NAOMI.ini' file: fullscreen = 1
- To quit emulator using the ESC key:
NullDC-Naomi
NullDC-Naomi needs .lst files to point to the (rom) .dat files. So you need both files per game.
mGalaxy is set to detect .lst files (needed by 'NullDC-Naomi') and .dat files (needed by 'NullDC-Naomi' through .lst files AND by 'Makaron' emulator)
If you place both files in the same folder, mGalaxy - which is programmed to choose the first extension met when it comes across
2 (or more) files with the same name (but different extension) - will consider the .dat file as the 'rom' file to be launched...which will lead to an error.
The solution:
1. To create a folder names 'lst' and drop all .lst files inside.
2. To edit the path to the .dat file in all of those .lst files. (Example: &../roms/Ikaruga.dat&)
3. To choose this 'lst' folder as 'Rom folder' in mGalaxy_Runway
Quick tutorial:
Drop your .dat rom files into the 'roms' folder inside of NullDC-Naomi folder.
2. Download
and extract it inside the same
NullDC-Naomi folder (a new folder will be created called 'lst' and full of .lst files with their paths already edited to point to the 'roms'
3. Run mGalaxy_Runway, select 'Sega Naomi', click 'Rom Path' and select your 'lst' folder.
Attention:
if you want to place your roms in another place, you'll have then to edit paths in .lst files accordingly.
- To quit emulator using the ESC key:
Sega Naomi
Nothing to do!
- To change the fullscreen type:
Open 'mednafen-09x.cfg' file, search for 'lynx.stretch' and edit the following value.
This value can be:
0 : Disabled
full : Full-screen stretch, disregarding aspect ratio.
aspect : Aspect Preserve (Full-screen stretch as far as the aspect ratio (in this sense, the equivalent xscalefs == yscalefs) can be maintained)
aspect_int : Aspect Preserve + Integer Scale (Full-screen stretch, same as &aspect& except that the equivalent xscalefs and yscalefs are rounded down to the nearest integer)
aspect_mult2 : Aspect Preserve + Integer Multiple-of-2 Scale (Full-screen stretch, same as &aspect_int&, but rounds down to the nearest multiple of 2)
- To set the emulator to fullscreen:
Start Yabause, go to 'File' & 'Settings'' & 'Video' tab and check the 'Full Screen' checkbox. Then, 'View' tab and check 'Full Screen' on each line.
While you're there: 'General' tab and check 'Autostart' checkbox.
(or edit values in 'C:\\Users\YourComputerName\AppData\Local\yabause\yabause.ini: Video\Fullscreen=true, View\Menubar=1, View\Toolbar=1, autostart=true)
- To quit emulator using the ESC key:
- To set the emulator to fullscreen:
When in SSF, press ALT+ENTER. The application will pass to fullscreen and this setting will be memorized for future sessions
Open the 'SSF.ini' file with a text editor, locate this line: ScreenMode=&0& and change it to ScreenMode=&1&
- To &Auto-mount& virtual disk:
Install , create a virtual drive at letter 'M'
Sega Saturn
Kega Fusion
- To remove FPS information display:
Start Fusion, go to 'Options' and un-check 'Show FPS'.
(or edit values in 'Fusion.ini' file: FPSEnabled=0 )
Sega SG-1000
XM6 Pro-68k / XM6g
- To quit emulator using the ESC key / To set the emulator to fullscreen:
Sharp X68000
Spectaculator
- To quit emulator using the ESC key:
Start Spectaculator, go to 'Tools & Options...'. In that window, select the 'Advanced' tab. Under 'Warnings', set 'Warn before exiting Spectaculator' to 'Off'. Under 'Miscellaneous', set 'Press Escape key to exit Spectaculator' to 'On'
- To set the emulator to fullscreen:
Start Spectaculator, click on the 'Full Screen' icon (or press Alt+Enter). The window state will automatically be saved.
Sinclair ZX Spectrum
Nothing to do!
SNK NeoGeo CD
Nothing to do!
- To change the fullscreen type:
Open 'mednafen-09x.cfg' file, search for 'ngp.stretch' and edit the following value.
This value can be:
0 : Disabled
full : Full-screen stretch, disregarding aspect ratio.
aspect : Aspect Preserve (Full-screen stretch as far as the aspect ratio (in this sense, the equivalent xscalefs == yscalefs) can be maintained)
aspect_int : Aspect Preserve + Integer Scale (Full-screen stretch, same as &aspect& except that the equivalent xscalefs and yscalefs are rounded down to the nearest integer)
aspect_mult2 : Aspect Preserve + Integer Multiple-of-2 Scale (Full-screen stretch, same as &aspect_int&, but rounds down to the nearest multiple of 2)
SNK NeoGeo Pocket
See "SNK NeoGeo Pocket"
SNK NeoGeo Pocket Color
- To set the emulator to fullscreen:
Start ePSXe, go to 'Config' & 'Video' & select a video plug-in then click on 'Configure'.
Check 'Fullscreen mode' and set your resolution.
Check 'Keep psx aspect ratio'
PCSX-Reloaded
Nothing to do!
Nothing to do!
- To quit emulator using the ESC key:only possible through an AutoIt script.
- To quit emulator using the ESC key:
PCSX2 seems to quit on ESC key...but the application is actually still running (you won't see it...but the process is running).
A proper quit on ESC is
Nothing to do!
Willing to add/remove/modify an emulated systems?
Receive all updates via Facebook.
Just Click the Like Button Below...