点击次数：3388次
塑料.使用毛细管粘度计测定稀释溶液中聚合物的粘度.第5部分:热塑性聚酯(TP)均聚物和共聚物
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
JIS X6176 ERRATUM 1-2006
信息处理.信息互换用磁带的文件结构和标签
Information processing -- File structure and labelling of magnetic tapes for information interchange
铁合金.X-射线荧光光谱测定分析法
Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
铬矿石.铬含量的测定
Chromium ores -- Determination of chromium content
量值和单位.第3部分:力学
Quantities and units -- Part 3: Mechanics
量值和单位.第4部分:热学
Quantities and units -- Part 4: Heat
煤和焦炭.一个批量的总水分含量的测定
Coal and coke -- Determination of total moisture content of a lot
塑料.氟化聚合色散模塑和挤塑材料.第2部分:试样的制备和特性的测定
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
玻璃纤维增强的耐化学作用的热固性树脂箱
Glass-fiber reinforced thermosetting resin chemical-resistant tanks
亚麻和苎麻缝纫线
Linen and ramie sewing thread
无缝镍或镍合金管
Seamless nickel and nickel alloy tube
提高了耐大气腐蚀性的连续热轧结构薄钢板
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
热处理钢、合金钢和易切削钢.第18部分:非合金钢和低合金钢光亮产品
Heat-treatable steels, alloy steels and free-cutting steels -- Part 18: Bright products of unalloyed and low alloy steels
混凝土增强用钢筋.第2部分:螺纹钢筋
Steel for the reinforcement of concrete -- Part 2: Ribbed bars
混凝土增强用钢筋.第1部分:光面钢筋
Steel for the reinforcement of concrete -- Part 1: Plain bars
电动车辆相关术语汇编(电池)
Glossary of terms relating to electric vehicles (Batteries)
塑料.吸水率的测定
Plastics -- Determination of water absorption
识别卡.带触点的集成电路卡.第3部分:电子信号和传输协议
Identification cards -- Integrated circuit(s) cards with contacts -- Part 3: Electronic signals and transmission protocols
塑料.氯乙烯均聚物和共聚物树脂.含水萃取物PH值的测定
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract
技术制图.方向和位置的公差表示.突出公差带
Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
JIS C-2000
照明器..第2部分:安全的特殊要求.第22节:应急照明用照明器
Luminaires -- Part 2: Particular requirements for safety Section 22: Luminaires for emergency lighting
低压电力电容器
Low-voltage power capacitors
在受控复合条件下塑料材料最大需氧生物降解性和分解作用的测定.离析二氧化碳分析法
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide
水生介质中塑料材料最大需氧生物降解性的测定.离析二氧化碳分析法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
冷镦或冷挤压加工用钢材
Steels for cold heading and cold extruding
Ferronickel
铁合金化学分析的取样方法(第4部分:镍铁合金)
Methods of sampling for chemical analysis of ferroalloys (Part 4: Ferronickel)
塑料.氯乙烯－醋酸乙烯酯共聚物.醋酸乙烯酯的测定
Plastics -- Vinyl chloride-vinyl acetate copolymers -- Determination of vinyl acetate
长丝纱非机织织物的试验方法
Test methods for non-woven fabrics made of filament yarn
棉质缝纫线
Cotton sewing thread
带触点的集成电路卡.触点的物理特性与位置
Integrated circuit(s) cards with contacts -- Physical characteristics and location of contacts
可编程序控制器.现场网络标准(1级)
Programmable controllers -- Field network standard (Level 1)
压力平衡.第1部分:计量要求
Pressure balances -- Part 1: Metrological requirements
表面化学分析.次级离子质谱法.利用均匀掺杂材料测定硅中硼原子浓度
Surface chemical analysis -- Secondary ion mass spectrometry -- Determination of boron atomic concentration in silicon using uniformly doped materials
工业用丁烷－1－o1.第2部分:质量
Butan-1-ol for industrial use -- Part 2: Quality
防腐蚀矿脂带
Petrolatum tapes for corrosion protection
不锈钢的硫酸试验方法
Method of sulfuric acid test for stainless steels
建筑结构用不锈钢
Stainless steel for building structure
Steel valves
螺旋压缩与拉伸弹簧.设计要求和性能试验方法
Helical compression and extension springs -- Requirements for design, performance test method
颜色测量方法.反射和发射物体
Methods of colour measurement -- Reflecting and transmitting objects
工业用氢氧化钠.第6部分:铁含量的测定.原子吸收光谱测定法和感应耦合等离子体原子发射光谱测定法
Sodium hydroxide for industrial use -- Part 6: Determination of iron content -- Atomic absorption spectrometry and inductively coupled plasma atomic emission spectrophotometry
气液流体动力.压缩空气过滤器.第2部分:预定列入供应商资料中的产品主要特性的测定试验方法
Pneumatic fluid power -- Compressed air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
气液流体动力.压缩空气过滤器.第1部分:预定列入供应商资料中的产品主要特性和标记要求
Pneumatic fluid power -- Compressed air filters -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
电动车辆相关术语汇编(电动机和控制器)
Glossary of terms relating to electric vehicles (Electric motors and controllers)
与电动车辆有关的术语汇编(车辆)
Glossary of terms relating to electric vehicles (Vehicles)
工业用液态氯.氯含量的测定
Liquid chlorine for industrial use -- Determination of the chlorine content
JIS K-2000
工业用氢氧化钠.第3部分:氯化物含量的测定.第1节:硫氰酸汞(II)光度法
Sodium hydroxide for industrial use -- Part 3: Determination of chlorides content -- Section 1: Mercury (II) thiocyanate photometry
JIS C-2000
电子设备用电位计.第2部分:空白详细规范:导螺杆作动的和旋转预调电位计.评定等级E
Potentiometers for use in electronic equipment -- Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers Assessment level E
电子设备用电位计.第2部分:分规范:导螺杆作动的和旋转预调电位计
Potentiometers for use in electronic equipment -- Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers
日语输入法用键击拉丁字母的数据传输法
Keystroke to KANA Transfer Method Using Latin Letter Key for Japanese Input Method
JIS C-2000
手提式电动工具的安全.第2-2部分:旋具和套筒扳手的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-2: Particular requirements for screwdrivers and impact wrenches
JIS C-2000
电子设备用电位计.第5部分:空白详细规范:单匝低功率旋转电位计.评定等级E
Potentiometers for use in electronic equipment -- Part 5: Blank detail specification: Single-turn rotary low-power potentiometers Assessment level E
电子设备用电位计.第5部分:分规范:单匝低功率线绕旋转和非线绕电位计
Potentiometers for use in electronic equipment -- Part 5: Sectional specification: Single-turn rotary low-power wirewound and non-wirewound potentiometers
JIS C-2000
手提式电动工具的安全.第2-13部分:链锯的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-13: Particular requirements for chain saws
JIS C-2000
家用和类似用途自动电气控制装置.第2-1部分:家用电器装置的电气控制的特殊要求
Automatic electrical controls for household and similar use -- Part 2-1: Particular requirements for electrical controls for electrical household appliances
不锈钢的氯化铁试验方法
Method of ferric chloride tests for stainless steels
试验筛.第3部分:电化成形试验筛
Test sieves -- Part 3: Test sieves of electroformed sheets
工业用氢氧化钠.第5部分:硅含量的测定.感应耦合等离子体原子发射光化学分析法
Sodium hydroxide for industrial use -- Part 5: Determination of silicon content -- Inductively coupled plasma atomic emission spectrochemical analysis
比重计.试验方法
Hygrometers -- Test method
水生介质中塑料材料最大需氧生物降解性的测定.采取对封闭呼吸器中需氧量进行测定的方法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer
眼科光学.眼镜架.词汇和等义术语表
Ophthalmic optics -- Spectacle frames -- Vocabulary and lists of equivalent terms
光学和光学仪器.眼科光学.支撑板
Optics and optical instruments -- Ophthalmic optics -- Formers
土方机械.操作说明书.内容和格式
Earth-moving machinery -- Operator's manual -- Content and format
声学.机械装置及设备发出的噪声.工作地点和其它特定场所发出声压级的测量.反射平面上基本自由声波场的工程
Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Engineering method in an essentially free field over a reflecting plane
气相色谱分析方法通用规则
General rules for gas chromatographic analysis
JIS C-2000
电子设备用电位计.第5部分:空白详细规范:单匝低功率旋转电位计.评定等级F
Potentiometers for use in electronic equipment -- Part 5: Blank detail specification: Single-turn rotary low-power potentiometers Assessment level F
涡轮式鼓风机和压缩机的检验方法
Testing methods for turbo blowers and compressors
涡轮风扇试验方法
Testing methods for turbo-fans
旋转动力泵.液压性能验收试验.1级和2级
Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2
滚动轴承.基本尺寸
Rolling bearings -- Boundary dimensions
普通扭矩型钢六角头螺母.机械和使用性能
Prevailing torque type steel hexagon nuts -- Mechanical and performance properties
电声学.声级测量仪的随机入射和散射区域的校正
Electroacoustics -- Random incidence and diffuse field calibration of sound level meters
声学.机械装置及设备发出的噪声.工作地点和其它特定场所发出声压级的测量.现场调查方法
Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Survey method in situ
JIS C-2000
手提式电动工具的安全.第2-8部分:薄板材金属剪的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-8: Particular requirements for sheet metal shears
JIS C-2000
手提式电动工具的安全.第2-7部分:不易燃液体喷枪的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-7: Particular requirements for spray guns for non-flammable liquids
JIS C-2000
手提式电动工具的安全.第2-6部分:锤子的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-6: Particular requirements for hammers
JIS C-2000
手提式电动工具的安全.第2-17部分:电动木铣和修整器的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-17: Particular requirements for routers and trimmers
JIS C-2000
手提式电动工具的安全.第2-15部分:绿篱修剪机和割草机的特殊要求
Safety of hand-held motor-operated electric tools -- Part 2-15: Particular requirements for hedge trimmers and grass shears
工业用氢氧化钠.第2部分:总碱度、氢氧化钠和碳酸钠的测定
Sodium hydroxide for industrial use -- Part 2: Determination of total alkalinity, sodium hydroxide and sodium carbonate
绝缘变压器和安全绝缘变压器.要求
Isolating transformers and safety isolating transformers -- Requirements
压力平衡.第3部分:操作程序和条件
Pressure balances -- Part 3: Operation procedure and conditions
表面化学分析.数据传送格式
Surface chemical analysis -- Data transfer format
表面化学分析.信息格式
Surface chemical analysis -- Information formats
JIS C-2000
各种灯座.第2部分:特殊要求.第1节:S14 灯座
Miscellaneous lampholders Part 2: Particular requirements Section 1: Lampholders S14
工业用氢氧化钠.第1部分:比重或密度
Sodium hydroxide for industrial use -- Part 1: Specific gravity or density
硅铬铁的化学分析方法
Method for chemical analysis of ferrosilicochromium
整体式雾化燃油器.检验
Atomizing oil burner of the monobloc type -- Testing
防爆盘和防爆盘组件
Bursting discs and bursting disc assemblies
碳素钢和合金钢紧固件的机械特性.第1部分:螺栓、螺钉和螺柱
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs
JIS K-2000
工业用氢氧化钠.第8部分:钙含量的测定.第2节:感应耦合等离子体原子发射光谱法
Sodium hydroxide for industrial use -- Part 8: Determination of calcium content -- Section 2: Inductively coupled plasma atomic emission spectrometry
JIS K-2000
工业用氢氧化钠.第9部分:镁含量的测定.第1节:火焰原子吸收光谱法
Sodium hydroxide for industrial use -- Part 9: Determination of magnesium content -- Section 1: Flame atomic absorption spectrometry
JIS K-2000
工业用氢氧化钠.第9部分:镁含量的测定.第2节:感应耦合等离子体原子发射光谱测定法
Sodium hydroxide for industrial use -- Part 9: Determination of magnesium content -- Section 2: Inductively Coupled Plasma atomic emission spectrometry
工业用氢氧化钠.第10部分:锰含量的测定
Sodium hydroxide for industrial use -- Part 10: Determination of manganese content
防散射光栅
Anti-scatter grids
医用X光射线图像放大器
Medical X-ray image intensifiers
气载纤维粒子的测量方法.第4部分:石棉厂排放量的测定.纤维计数测量法
Measuring method for airborne fibrous particles -- Part 4: Determination of asbestors plant emissions -- Method by fibre count measurement
空气中纤维粒子的测量方法.第3部分:间接传递透射电子显微镜法
Measuring method for airborne fibrous particles -- Part 3: Indirect-transfer transmission electron microscopy method
牙科旋转仪器.心轴
Dental rotary instruments -- Mandrels
牙科旋转仪器.标准规格和标识
Dental rotary instruments -- Nominal sizes and designation
牙科旋转仪器.金刚石仪器.第1部分:尖端.尺寸、要求、标记和包装
Dental rotary instruments -- Diamond instruments -- Part 1: Points -- Dimensions, requirements, marking and packaging
空气中纤维粒子的测量方法.第2部分:直接传递透射电子显微镜法
Measuring method for airborne fibrous particles -- Part 2: Direct-transfer transmission electron microscopy method
JIS B8436 Technical Corrigendum 1-1999
操作型工业机器人.机械接口.第1部分:板(A型)(修改件1)
各类执行检查的工作机构的一般工作准则
General criteria for the operation of various types of bodies performing inspection
JIS K-2000
工业用盐酸.第1部分:总酸度的测定.第2节:电位测量法
Hydrochloric acid for industrial use -- Part 1: Determination of total acidity -- Section 2: Potentiometric method
工业用盐酸.第2部分:通过密度测量评估盐酸的浓度
Hydrochloric acid for industrial use -- Part 2: Evaluation of hydrochloric acid concentration by measurement of density
工业用盐酸.第3部分:铁含量的测定.1,10-菲咯啉分子吸收光谱测定法、电热原子吸收光谱测定法和感应耦合等离
Hydrochloric acid for industrial use -- Part 3: Determination of iron content -- 1,10-Phenanthroline molecular absorption spectrometry, Electrothermal type atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry
JIS K-2000
工业用氢氧化钠.第3部分:氯化物含量的测定.第2节:改进的伏哈德离子色谱分析法
Sodium hydroxide for industrial use -- Part 3: Determination of chlorides -- Section 2: Modified volhard method, ion chromatographic analysis
工业用氢氧化钠.第4部分:硫酸钠含量的测定
Sodium hydroxide for industrial use -- Part 4: Determination of sodium sulfate content
粘度计校准用标准液
Standard liquids for calibrating viscometers
土壤用增量载荷的单维固结性能的试验方法
Test method for one-dimensional consolidation properties of soils using incremental loading
土壤收缩参数的试验方法
Test method for shrinkage parameters of soils
土壤试验用扰动土样制备的实施规程
Practise for preparing disturbed soil samples for soil testing
铁矿石.X射线荧光光谱仪分析
Iron ores -- X-ray fluorescence spectrometric analysis
铁矿石.化学分析方法通则
Iron ores -- General rules for chemical analysis
工业用氢氧化钠.第7部分:铝含量的测定
Sodium hydroxide for industrial use -- Part 7: Determination of aluminium content
工业用盐酸.第4部分:燃烧残余物测定法
Hydrochloric acid for industrial use -- Part 4: Determination of ignition residue method
异型钢丝钢丝绳
Wire ropes with profile wires
Low carbon steel wires
耐霉菌试验方法
Methods of test for fungus resistance
液力和一般用途金属管接头.第5部分.螺纹液压动力接头的试验方法
Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
塑料.未增塑的聚氯乙烯板.类型、尺寸和特性.第2部分:厚度小于1mm的薄板材
Plastics -- Unplasticized poly (vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm
声学.利用声压测定噪声源的音响功率级.混响室内的精确测定法
Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Precision methods for reverberation rooms
声学.利用声压测定噪声源的音响功率级.消声室和半消声室的精确测定法
Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Precision methods for anechoic and hemi-anechoic rooms
JIS K-2000
水质.取样.第10部分:废水取样指南
Water quality -- Sampling -- Part 10: Guidance on sampling of waste waters
JIS K-2000
水质.取样.第11部分:地下水取样指南
Water quality -- Sampling -- Part 11: Guidance on sampling of groundwaters
牙科倒钩拔髓针
Dental barbed broaches
信息技术.开放系统互连.网络服务定义
Information technology -- Open Systems Interconnection -- Network Service Definition
信息技术.12.77mm208道盒式磁带上的数据互换.DLT5格式
Information technology -- Data interchange on 12.7 mm 208-track magnetic tape cartridge -- DLT5 format
过程控制和工作流程用数据库结构体系模型和控制参数编码.第1部分:结构体系模型和数据库格式
Database architecture model and control parameter coding for process control and workflow Part 1: Architecture model and database format
装箱的货物.试验条件
Packaged freights -- Conditioning for testing
牙科棉质髓针
Dental cotton broaches
牙科用Peeso式牙根管扩孔钻
Dental Peeso's root-canal reamers
牙科旋转装置.试验室磨削装置
Dental rotary instruments -- Laboratory abrasive instruments
可移动托牙的长期用软衬料
Long-term soft lining materials for removable dentures
铅合金梯子和活动梯
Aluminium ladder and stepladder
移动式机器人.词汇
Mobile robots -- Vocabulary
信息技术.开放系统互连.提供连接方式传输服务的协议
Information technology -- Open Systems Interconnection -- Protocol for Providing the connection-mode transport service
JIS K-2000
水质.取样.第12部分:底部污泥取样指南
Water quality -- Sampling -- Part 12: Guidance on sampling of bottom sediments
JIS K-2000
水质.对淡水鱼有害物质的急性致死毒性的测定.第1部分:静态方法
Water quality -- Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (teleostei, Cyprinidae)] -- Part 1: Static method
JIS K-2000
水质.测定对淡水鱼有毒物质的急性致死毒性[Brachydanio rerio Hamilton-Buchanan (teleostei, Cyprinidae)]
Water quality -- Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (teleostei, Cyprinidae)] -- Part 2: Semi-static method
JIS K-2000
水质.对淡水鱼有害物质的急性致死毒性的测定.第3部分:通流方法
Water quality -- Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (teleostei, Cyprinidae)] -- Part 3: Flow-through method
JIS K-2000
水质.用Scenedesmus subspicatus and Selenastrum capricornutum 进行新鲜水中藻类生长抑制试验
Water quality -- Fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum
JIS K-2000
水质.活微生物计数.营养培养基中或上面的单菌落计数
Water quality -- Enumeration of viable micro-organisms -- Colony count by inoculation in or on a nutrient culture medium
JIS K-2000
水质.培养的微生物计数一般指南
Water quality -- General guide to the enumeration of micro-organisms by culture
JIS K-2000
水质.大肠杆菌,耐热大肠杆菌和假定大肠杆菌生物体的计数和检测.第1部分:膜过滤法
Water quality -- Detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli -- Part 1: Membrane filtration method
摄影用电子闪光装置的安全性要求
Safety requirements for electronic flash apparatus for photographic purposes
Earth-moving machinery -- Safety -- Part 2: Requirements for bulldozer
电子设备用表面安装转换开关的试验方法
Testing methods of surface mounting switches for use in electronic equipment
JIS C-2000
家用和类似的一般用途的设备耦合器.第2-1部分:缝纫机耦合器
Appliance couplers for household and similar general purposes -- Part 2-1: Sewing machine couplers
电气设备的电缆线槽和导管系统.第1部分:一般要求
Cable trunking and ducting systems for electrical installations -- Part 1: General requirements
汽车附件.幼儿限动保护装置
Automotive accessories -- Child restraints
道路车辆.轮胎防滑链
Road vehicle -- Tyre chains
结构用金属索
Wire ropes for structure
耐热钢和合金
Heat-resisting steels and alloys
升降机用移动电缆
Travelling cables for elevators
电动机械和设备用橡胶绝缘引线
Rubber insulated lead wires for electric machinery and apparatus
电气设备用聚氯乙烯绝缘线
Polyvinyl chloride insulated wires for electrical apparatus
燃料电池动力装置术语集
Glossary of terms for fuel cell power plant
光电系统性能的测量程序
Measuring procedure of photovoltaic system performance
600 V 硅酮橡胶绝缘线
600 V Silicone rubber insulated wires
600 V 橡胶绝缘软电缆
600 V Rubber insulated flexible cables
聚氯乙烯绝缘电线的室外防水性能
Outdoor weatherproof polyvinyl chloride insulated wires
钼钢及铬钼钢涂复电焊条
Molybdenum steel and chromium molybdenum steel covered electrodes
肖氏硬度试验.试验方法
Shore hardness test -- Test method
焊接的符号表示
Symbolic representation of welds
低碳钢用涂覆电焊条
Covered electrodes for mild steel
高拉伸强度钢用涂覆电焊条
Covered electrodes for high tensile strength steel
增强纱.捻度的测定
Reinforcement yarns -- Determination of twist
碳纤维.单纤维试样拉伸特性的测定
Carbon fibre -- Determination of the tensile properties of the single-filament specimens
表面硬堆焊用涂覆电焊条
Covered electrodes for hardfacing
程序设计语言.Fortran.第3部分:有条件编码
Programming languages -- Fortran -- Part 3: Conditional Compilation
流体动力用和通用的连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第1部分:截断平头壳体内带有 O 形
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
流体动力用和通用连接件.带ISO 261螺纹，带有弹性体或金属对金属密封件的端口和螺柱断头.第2部分:带弹性密
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 2: Stud ends with elastomeric sealing (type E)
液压流体动力.与系统有关的一般规则
Hydraulic fluid power -- General rules relating to systems
气动流体动力.与系统有关的一般规则
Pneumatic fluid power -- General rules relating to systems
液压流体动力.泵和马达.几何位移量
Hydraulic fluid power -- Pumps and motors -- Geometric displacements
流体动力系统和元件.气缸.往复运功用的活塞和活塞杆密封件的外套.尺寸和公差
Hydraulic fluid power -- Cylinders -- Housings for piston and rod seals in reciprocating applications -- Dimensions and tolerances
液压流体动力.四孔模块通气阀和四孔方向控制阀.02,03,05尺寸.夹持尺寸
Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions
一般用途的压缩空气.第2部分:气溶胶油含量的试验方法
Compressed air for general use -- Part 2: Test methods for aerosol oil content
气动流体动力.标准参照大气
Pneumatic fluid power -- Standard reference atmosphere
液压流体动力.流体.限定固体颗粒污染水平的编码
Hydraulic fluid power -- Fluids -- Code for defining the level of contamination by solid particles
液压流体动力.使用消光原理自动计数测定颗粒污染
Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle
Asphalt emulsion
再生纤维毛毡
Recovered fiber felts
JIS K-2000
水质.亚硝酸盐的测定.分子吸收分光计法
Water quality -- Determination of nitrite -- Molecular absorption spectrometric method
JIS K-2000
水质.亚硝酸盐的测定.第1部分:2,6-二甲苯酚分光计法
Water quality -- Determination of nitrate -- Part 1: 2,6-Dimethylphenol spectrometric method
JIS K-2000
水质.亚硝酸盐的测定.第2部分:蒸馏后4-氟代苯酚分光计法
Water quality -- Determination of nitrate -- Part 2: 4-Fluorophenol spectrometric method after distillation
JIS K-2000
水质.亚硝酸盐的测定.第3部分:使用磺基水杨酸的分光计法
Water quality -- Determination of nitrate -- Part 3: Spectrometric method using sulfosalicylic acid
JIS K-2000
水质.基尔达氮的测定.用硒矿化后的检测方法
Water quality -- Determination of Kjeldahl nitrogen -- Method after mineralization with selenium
道路车辆.使用非石油基液压制动液的液压盘式制动缸的弹性密封件
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid
致冷设备致冷机的能力评估
Capacity evaluation for refrigerating unit coolers
人类工效学.带可视显示终端的办公室工作.命令对话
Ergonomics -- Office work with visual display terminals (VDTs) -- Command dialogues
机械振动和冲击的术语汇编
Glossary of terms used in mechanical vibration and shock
机械工程的计算机辅助设计（CAD ）制图实施规程
Drawing practices for mechanical engineering by CAD
大气中悬浮颗粒物质自动监测器
Automatic monitors for suspended particulate matter in ambient air
起重机.控制装置.设计方案和特征.第4部分:悬臂起重机
Cranes -- Controls -- Layout and characteristics -- Part 4: Jib cranes
丁苯橡胶(SBR).乳胶和溶液聚合型橡胶.评定程序
Styrene-butadiene rubber (SBR) -- Emulsion-and solution-polymerized types -- Evaluation procedures
橡胶配合材料.试验方法.第3部分:抗降解剂
Rubber compounding ingredients -- Test methods -- Part 3: Antidegradants
管理、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第6部分:安全鉴定和确认信息(信
Electronic data interchange for administration, commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number:4) -- Part 6: Secure authentication and acknowledgement message (message type -- AUTACK)
信息技术.计算机图形和图像处理.程序员分层交互图形系统(PHIGS).第1部分:功能描述
Information technology -- Computer graphics and image processing -- Programmer's Hierarchical Interactive Graphics System (PHIGS) -- Part 1: Functional description
未硫化橡胶.物理特性.第2部分:用振荡固化器测定固化特性
Rubber, unvulcanized -- Physical property -- Part 2: Determination of cure characteristics with oscillating curemeters
未硫化橡胶.物理试验方法.第3部分:用快速塑度计测定可塑性和塑性保持指数(PRI)
Rubber, unvulcanized -- Physical testing methods -- Part 3: Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter
耐火焰的输送带.分类和试验方法
Flame resistant conveyor belts -- Classification and test methods
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求与命名
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation
塑料.聚四氟乙烯(PTFE)半成品.第2部分:试验样品制备和性能测定
Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties
压缩氧气闭路自带式呼吸器
Compressed oxygen closed circuit self-contained breathing apparatus
硫化铜、铅和锌浓缩物.抽样程序和水含量测定方法
Copper, lead and zinc sulfide concentrates -- Sampling procedures and methods for determination of moisture content
铁矿石.滚动强度的测定
Iron ores -- Determination of tumble strength
铁矿石.可还原性的测定
Iron ores -- Determination of reducibility
铁矿石球团.自由膨胀指数的测定
Iron ore pellets -- Determination of free-swelling index
管理、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第5部分:成批电子数据交换的安
Electronic data interchange for administration, commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number:4) -- Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
丙氨酸剂量测定系统
The alanine dosimetry system
起重机和提升设备.分类.第4部分:悬臂起重机
Cranes and lifting appliances -- Classification -- Part 4: Jib cranes
起重机和提升设备.分类.第5部分:移动式高架起重机和桥式龙门起重机
Cranes and lifting appliances -- Classification -- Part 5: Overhead travelling and portal bridge cranes
起重机.控制装置.设计方案和特征.第1部分:总则
Cranes -- Controls -- Layout and characteristics -- Part 1: General
钼材料的化学分析方法
Methods for chemical analysis of molybdenum materials
加有氧化钍的钨丝材料的化学分析方法
Methods for chemical analysis of thoriated tungsten materials
镍和镍合金棒材
Nickel and nickel alloys bars
工业用水和废水中农药的测试方法
Testing methods for pesticides in industrial water and waste water
聚氯乙烯绝缘的用户设备引入线
Polyvinyl chloride insulated drop service wires
600 V 聚氯乙烯绝缘和铠装电缆
600 V Polyvinyl chloride insulated and sheathed cables
Welding cables
架杆变压器用高压绝缘用户设备引入电线
High-voltage drop wires for pole transformer
600 V 等级乙丙烯橡胶绝缘电缆
600 V Grade ethylene-propylene rubber insulated cables
环氧树脂中环氧当量的测定
Determination of epoxy equivalent in epoxy resins
隔热耐火砖
Insulating fire bricks
隔热耐火砖传热系数的试验方法
Testing method for thermal conductivity of insulating fire bricks
钛及钛合金.取样方法
Titanium and titanium alloys -- Sampling methods
消费者用产品信息指南
Guidelines for product information for consumers
砂纸磨料的粒度
Coated abrasive grain sizes
Common bricks
布砂纸磨料微粒的粒度试验方法(P240-P2500)
Testing method for grain size of coated abrasive microgrits (P240-P2500)
铁路轨道用鱼尾板
Fish plates for rails
染色和精整机械术语汇编
Glossary of terms used in dyeing and finishing machinery
牙科旋转仪器.切削工具.第1部分:钢制实验室切削工具
Dental rotary instruments -- Cutters -- Part 1: Steel laboratory cutters
牙科旋转仪器.切削工具.第2部分:硬质合金实验室切削工具
Dental rotary instruments -- Cutters -- Part 2: Carbide laboratory cutters
牙科旋转仪器.切削工具.第3部分:硬质合金实验室切削工具. 研磨机
Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines
牙科用手持仪器.可重复使用的镜子及镜柄
Dental hand instruments -- Reusable mirrors and handles
混凝土耐冻结性和耐融化性的试验方法
Method of test for resistance of concrete to freezing and thawing
混凝土的静态弹性模量测试方法
Method of test for static modulus of elasticity of concrete
混凝土的坍落流试验方法
Method of test for slump flow of concrete
光纤电缆连接器通则
General rules of connectors for optical fiber cables
光学纤维电缆连接器通则
General rules of connectors with optical fiber cables
F07型光纤电缆的连接器
F07 Type connectors for optical fiber cables
F13型光纤维带的连接器
F13 Type connectors for optical fiber ribbons
光纤电缆的F15 型连接器
F15 Type connectors for optical fiber cables
铁路车辆用油缓冲器.性能通则
Oil damper for railway rolling stock -- General rules for performance
粘合磨料产品.尺寸.第6部分:工具和工具室研磨用砂轮
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
JIS A1550 ERRATUM 1-2003
(Erratum 1)
机床试验规程.噪声排放的测定
Test code for machine tools -- Determination of the noise emission
灰浆和混凝土长度变化的试验方法.第1部分:比较器检测法
Methods of test for length change of mortar and concrete Part 1: Method with comparator
灰浆和混凝土长度变化的试验方法.第2部分:接触式应变仪检测法
Methods of test for length change of mortar and concrete Part 2: Method with contact-type strain gauge
灰浆和混凝土长度变化的试验方法.第3部分:千分表检测法
Methods of test for length change of mortar and concrete Part 3: Method with dial gague
道路车辆.诊断系统的数据链路层和应用层.第2部分:与发射相关的诊断服务
Road vehicles -- Data link layer and application layer for diagnostic systems -- Part 2: Emissions-related diagnostic services
牙钻手柄.第1部分:高速空气涡轮牙钻手柄
Dental handpieces -- Part 1: High-speed air-turbine handpieces
光纤电缆的F16 型连接器
F16 Type connectors for optical fiber cables
道路车辆.诊断系统的数据链路层和应用层.第3部分:与发射相关的诊断故障码定义
Road vehicles -- Data link layer and application layer for diagnostic systems -- Part 3: Emissions-related diagnostic trouble code definitions
两轮机动车.转向角限止器
Motorcycles -- Steering locks
未处理钢制道岔和交叉口用平底铁轨和特殊轨道
Flat bottom railway rails and special rails for switches and crossings of non-treated steel
混凝土生产控制试验方法.热水养护法测定混凝土压缩强度的快速试验方法
Methods of test for production control of concrete -- Method of rapid test for compressive strength of concrete by warm water curing
橡胶避孕套.第10部分:包装和标签
Rubber condoms -- Part 10: Packaging and labelling
油脂枪喷嘴
Grease nipples
燃气涡轮.废气排放.第1部分:测量和评价
Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
钢和铁术语集(产品和质量)
Glossary of terms used in iron and steel (Products and quality)
钢产品.定义和分类
Steel products -- Definitions and classification
土方机械.发动机.第1部分:净功率的试验规程
Earth-moving machinery -- Engines -- Part 1: Test code of net power
家用锁线缝纫机机头的分类和表示符号
Classification and identification signs of household lock stitch sewing machine heads
家用缝纫机的机针
Needles for household sewing machines
牙科用镍铬合金丝
Nickel-chromium alloy wires for dental use
图形技术.对印刷品和校样进行工艺控制或评价的反射密度测定法和比色法的应用
Graphic technology -- Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs
机械安全性.风险评定的原理
Safety of machinery -- Principles of risk assessment
机械安全性.紧急制动装置.设计原理
Safety of machinery -- Emergency stop -- Principles for design
JIS K-2000
水质.铵的测定.蒸馏和滴定法
Water quality -- Determination of ammonium -- Distillation and titration method
信息和文献工作.开放系统互连.资料馆间借阅应用服务定义
Information and documentation -- Open Systems Interconnection -- Interlibrary Loan Application Service Definition
声学.声功率级测定用标准声源的性能和校正要求
Acoustics -- Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
Cutting Fluid
熟油及熟亚麻籽油
Boiled oil and boiled linseed oil
涂层材料术语汇编
Glossary of terms for coating materials
纸张抗撕裂强度的测定.Elmendorf 撕裂试验机测试方法
Paper -- Determination of tearing resistance --Elmendorf tearing tester method
纸张和纸板.刚度测定.Taber刚度试验机测试法
Paper and board -- Determination of stiffness -- Taber stiffness tester method
管理、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第7部分:成批电子数据交换的安
Electronic data interchange for administration, commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number:4) -- Part 7: Security rules for batch EDI (confidentiality)
管理、商业和运输业用电子数据交换(EDIFACT).应用层语法规则(语法版本号:4).第9部分:安全键和证书管理信息(
Electronic data interchange for administration, commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number:4) -- Part 9: Security key and certificate management message (message type -- KEYMAN)
工业间信息交换语法规则(CII语法规则).第4部分:安全功能
Syntax rules for cross-industry information interchange (CII syntax rules) -- Part 4: The security function
医院用手动盖奇活动靠背床
Manually operated hospital gatch bed
电动轮椅和机动小型摩托车的电磁兼容性要求和试验方法
Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters
飞行器用胶合板
Plywoods for aircraft
起重机和提升设备.分类.第3部分:塔式起重机
Cranes and lifting appliances -- Classification -- Part 3: Tower cranes
金属材料焊接程序规范及认可.焊接程序试验.第1部分:钢的电弧焊及气焊和镍及镍合金的电弧焊
Specification and approval of welding procedures for metallic materials -- Welding procedure tests -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
起重机.控制装置.设计方案和特征.第5部分:移动式高架起重机和桥式龙门起重机
Cranes -- Controls -- Layout and characteristics -- Part 5: Overhead travelling cranes and portal bridge cranes
起重机.图形符号
Cranes -- Graphical symbols
起重机.风荷载评估
Cranes -- Wind load assessment
通风用空气过滤器装置和电动空气清洁器的试验方法
Test method of air filter units for ventilation and electric air cleaners for ventilation
无菌工作室
Clean work station
玻璃的粘度和测粘固定点.第3部分:膨胀变化温度的测定
Viscosity and viscometric fixed temperature of glass -- Part 3: Determination of dilatometric transformation temperature
压缩纤维连接
Compressed fiber jointing
人类工效学.带可视显示终端的办公室工作.键盘要求
Ergonomics -- Office work with visual display terminals (VDTs) -- Keyboard requirements
两轮机动车量.火花点火发动机排放(排气尾管)气体测量方法
Powered two-wheeled vehicles -- Measurement method of exhaust (tail pipe) gases from spark ignition engines
汽车散热器.散热性能试验方法
Radiators for automobiles -- Test method of heat dissipation
柴油发动机.高压燃料喷射泵组件.一般要求和尺寸
Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions
钨粉及碳化钨粉的化学分析方法
Methods for chemical analysis of tungsten powder and tungsten carbide powder
起重机.控制装置.设计方案和特征.第2部分:汽车起重机
Cranes -- Controls -- Layout and characteristics -- Part 2: Mobile cranes
起重机.控制装置.设计方案和特征.第3部分:塔式起重机
Cranes -- Controls -- Layout and characteristics -- Part 3: Tower cranes
JIS X4345 Technical Corrigendum 1-2000
信息技术.多媒体和超媒体信息编码.第5部分:基本级交互应用的支持(技术勘误1)
Information technology -- Coding of multimedia and hypermedia information -- Part 5: Support for base-level interactive applications (Technical Corrigendum 1)
技术图纸.表示的一般规则.CAD系统绘制直线的表示
Technical drawings -- General principles of presentation -- Preparation of lines by CAD system
液压流体动力.电气调节液压控制阀门.第1部分:四路直流控制阀门的试验方法
Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
软件工程.产品评估.第2部分:计划和管理
Software engineering -- Product evaluation -- Part 2: Planning and management
环境标志和声明.自我声明的环境要求(II型环境标志)
Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling)
环境标志和声明.I型环境标志.原则和程序
Environmental labels and declarations -- Type I environmental labelling -- Principles and procedures
多工序自动数字控制机床（加工中心）的试验条件.第3部分:带总组合工位转台或连续通用头的机床的几何试验
Test conditions for machining centers -- Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
多工序自动数字控制机床（加工中心）的试验条件.第4部分:线性和旋转轴定位的精确度和可重复性
Test conditions for machining centers -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
产品几何量技术规范(GPS).表面结构:轮廓法.表面结构评定规则和程序
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
圆柱形轴端
Cylindrical shaft ends
1:10锥度比的圆锥形轴端
Conical shaft ends for cone taper ratio 1:10
有色金属紧固件的机械性能
Mechanical properties of non-ferrous metal fasteners
质量管理系统.要求
Quality management systems -- Requirements
质量管理系统.性能提高指南
Quality management systems -- Guidelines for performance improvements
抗菌产品.抗菌活性和效果的试验
Antimicrobial products -- Test for antimicrobial activity and efficacy
技术产品文件.书写.第5部分.拉丁字母、数码和标记的计算机辅助设计（CAD）书写
Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet, numerals and marks
铁管和钢管配件.词汇
Iron and steel pipe fittings -- Vocabulary
产品几何量技术规范(GPS).表面结构:轮廓法.术语、定义和表面结构参数
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
产品几何量技术规范.表面结构:轮廓法.展成圆波纹度的定义和名称
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Definitions and designation of rolling circle waviness
产品几何量技术规范(GPS).表面结构:轮廓法.相位校正过滤器的计量特征
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters
Die sets for press dies
冲压模定位销
Dowel pins for dies and moulds
Guide pins for moulds
PCB(印制电路板）组装机器人.词汇
PCB (printed circuit board) assembly robots -- Vocabulary
起重机.词汇.第1部分:通则
Cranes -- Vocabulary -- Part 1: General
起重机.词汇.第2部分:汽车起重机
Cranes -- Vocabulary -- Part 2: Mobile cranes
压模回位销
Return pins for moulds
压模导销衬套
Guide bushes for moulds
JIS K-2000
水质.假单孢菌生长抑制试验（假单孢菌细胞增生抑制试验）
Water quality -- Pseudomonas putida growth inhibition test (Pseudomonas cell multiplication inhibition test)
蛋白质.血清白蛋白.定量分析方法
Proteins -- Serum albumin -- Methods for quantitative analysis
蛋白质.免疫球蛋白.定量分析方法
Proteins -- Immunoglobulin -- Methods for quantitative analysis
原油及石油产品.运动粘度的测定及根据运动粘度计算粘度指数的方法
Crude petroleum and petroleum products -- Determination of kinematic viscosity and calculation of viscosity index from kinematic viscosity
石油产品.柴油燃料.冷过滤堵塞点的测定
Petroleum products -- Diesel fuel -- Determination of cold filter plugging point
爆药的技术术语
Technical terms for explosives
橡胶配合材料.试验方法.第1部分:通则
Rubber compounding ingredients -- Test methods -- Part 1: General
塑料注塑金属模的定位环
Locating rings of moulds for plastics
塑料注塑金属模的顶推杆导销
Ejector guide pins of moulds for plastics
玻璃的粘度和测粘固定点.第1部分:软化点的测定
Viscosity and viscometric fixed points of glass -- Part 1: Determination of softening point
玻璃的粘度和测粘固定点.第2部分:通过纤维伸长度测定退火温度和应变点
Viscosity and viscometric fixed points of glass -- Part 2: Determination of annealing point and strain point by fiber elongation
信息技术.便携式操作系统接口装置(POSIX).第2部分:命令解释程序和实用程序
Information technology -- Portable Operating System Interface (POSIX) -- Part 2: Shell and Utilities
混凝土用矿渣集料.第1部分:高炉矿渣集料
Slag aggregate for concrete -- Part 1: Blast furnace slag aggregate
混凝土用矿渣集料.第2部分:镍铁矿渣集料
Slag aggregate for concrete -- Part 2: Ferronickel slag aggregate
混凝土用矿渣集料.第3部分:铜矿渣集料
Slag aggregate for concrete -- Part 3: Copper slag aggregate
包装.货物装卸图形符号
Packaging -- Pictorial marking for handling of goods
砂轮最大运转速度
Maximum operating speed of grinding wheels
个人防护设备和绝缘装置耐电压试验方法
Testing method for withstand voltage of personal protective equipment and insulating devices
防静电鞋靴
Anti-electrostatic footwears
静电危害防护工作服装
Working wears for preventing electrostatic hazards
Square nuts
JIS B2313 AMD 1-2001
钢板制对焊管接头(修改件1)
Steel plate butt-welding pipe fittings (Amendment 1)
利用工业废热发电系统的术语和定义
Terms and definitions of cogeneration systems
提升设备.能力
Lifting equipments -- Capacities
集料中密度低于1.95 g/cm*3的粒子的试验方法
Method of test for particles less than density of 1.95 g/cm*3 in aggregate
环境管理.环境性能评价.指南
Environmental management -- Environmental performance evaluation -- Guidelines
粒度分析结果的表示.第2部分:平均粒度/直径和粒度分布因素的计算
Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
胶粘剂.多成分胶粘剂使用寿命(适用期)的测定
Adhesives -- Determination of working life (pot life) of multi-component adhesives
塑料.塑料浸入液体化学物质中对其影响的测定试验方法
Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
塑料.硬度测试.第2部分:洛氏硬度
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
橡胶配合材料.试验方法.第2部分:有机催化剂和硫化试剂
Rubber compounding ingredients -- Test methods -- Part 2: Organic accelerators and vulcanizing agents
乳化聚合丁苯生橡胶.结合苯乙烯含量测定.折光指数法
Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
混凝土的加速碳酸饱和试验方法
Method of accelerated carbonation test for concrete
JIS C2805 ERRATUM 2-2003
JIS C2805 勘误表 2
JIS C0920 ERRATUM 1-2003
JIS C0920 勘误表 1
JIS B7010 ERRATUM 1-2003
JIS B7010 勘误表 1
无铅无铬的防锈漆
Lead-free, chromium-free anticorrosive paint
往复式内燃机.废气排放测量.第7部分:内燃机族测定
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
识别卡.无触点集成电路卡.邻近式识别卡.第1部分:物理特性
Identification cards -- Contactless integrated circuit(s) cards -- Proximity cards -- Part 1: Physical characteristics
识别卡.无触点集成电路卡.接近式识别卡.第1部分:物理特性
Identification cards -- Contactless integrated circuit(s) cards -- Vicinity cards -- Part 1: Physical characteristics
往复式内燃机.废气排放测量.第8部分:内燃机组测定
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
印制电路板（PCB ）组装机器人.安全性
PCB (printed circuit board) assembly robots -- Safety
钛及钛合金.化学分析通则
Titanium and titanium alloys -- General rules for chemical analysis
土方机械.电线和电缆.识别和标记的原则
Earth-moving machinery -- Electrical wires and cables -- Principles of identification and marking
土方机械.履带式机器.制动系统的性能要求和试验程序
Earth-moving machinery -- Crawlers machines -- Performance requirements and test procedures for braking systems
无机的多孔隔热材料
Inorganic porous thermal insulation materials
盘形剃齿刀
Rotary gear shaving cutters
钢铁.锰含量的测定方法
Iron and steel -- Methods for determination of manganese content
流动注入分析方法通则
General rules for flow injection analysis
离子色谱法分析通则
General rules for ion chromatographic analysis
塑料注塑金属模的顶推器导套
Ejector guide bushes of moulds for plastics
往复式内燃机.废气排放测量.第1部分:气态和颗粒废气排放的试验台测量
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
橡胶或塑料绝缘电线和电缆的试验方法
Test methods for rubber or plastic insulated wires and cables
橡胶绝缘软线
Rubber insulated flexible cords
聚氯乙烯绝缘软线
Polyvinyl chloride insulated flexible cords
建筑用板材的弯曲和冲击试验方法
Test methods of bending and impact for building boards
建筑板料.甲醛辐射的测定.干燥器法
Building boards Determination of formaldehyde emission -- Desicator method
光学元件和系统图的绘制.第6部分:中心校正公差
Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances
光学元件和系统图的绘制.第7部分:表面缺陷公差
Preparation of drawings for optical elements and systems -- Part 7: Surface imperfection tolerances
带槽六角槽顶螺母
Hexagon slotted and castle nuts
六角盖形螺母
Domede cap nuts
一般用途的和流体动力用接头.带弹性密封件或金属与金属间密封件的ISO 261螺纹的端口和螺柱端头.第1部分:螺
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
一般用途的和流体动力用接头.带ISO 261螺纹和O形环密封件的端口和螺柱端头.第1部分:在截断外壳体内装有O形
Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
圆锥形盘簧
Coned disc springs
多工序自动数字控制机床（加工中心）的试验条件.第5部分:工件固托板定位的精确度和可重复性
Test conditions for machining centers -- Part 5: Accuracy and repeatability of positioning of work-holding pallets
多工序自动数字控制机床（加工中心）的试验条件.第6部分:进刀、速度和内插补的精确度
Test conditions for machining centers -- Part 6: Accuracy of feeds, speeds and interpolations
常用扭矩型螺母.第4部分:带凸缘的全金属六角螺母
Prevailing torque type nuts -- Part 4: All-metal hexagon nuts with flange
显微镜物镜和目镜的标记
Marking of microscope objectives and eyepieces
工业自动化系统和一体化.产品数据显示和数据交换.第22部分:执行方法.标准数据存取接口
Industrial automation systems and integration -- Product data representation and exchange -- Part 22: Implementation methods: Standard data access interface
工业自动化系统和一体化.产品数据显示和数据交换.第32部分:一致性试验方法研究和框架.测试的实验室和客户要
Industrial automation systems and integration -- Product data representation and exchange -- Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
多工序自动数字控制机床（加工中心机床）的试验条件.第1部分:有水平轴和附属头的机床的几何试验(水平Z轴)
Test conditions for machining centers -- Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
铜及铜合金化学分析通则
General rules for chemical analysis of copper and copper alloys
钽的扁平轧制产品、杆材和线材
Tantalum flat mill products, rod and wire
丁苯生橡胶.皂含量和有机酸含量测定
Rubber, raw styrene-butadiene -- Determination of soap and organic-acid content
液压流体动力.电动机特性的测定.第2部分:可起动性
Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
热塑管.拉伸特性的测定.第2部分:未增塑聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和耐高强冲击的聚氯乙烯(PVC-H
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
造船.电照明装置配件的一般要求
Shipbuilding -- General requirements for electric lighting fittings
加长警报操纵台
Extension alarm panels
用非萃取法测定烟道废气中二氧化硫的自动测量系统
Automated measuring systems for sulfur dioxide in flue gas using non-extractive methods
道路车辆.自适应车速控制装置.性能要求和试验方法
Road vehicles -- Adaptive Cruise Control Systems -- Performance requirements and test procedures
外科手术植入物用钛材料.第4部分:锻制的钛15锆4铌4钽合金
Titanium materials for surgical implant applications Part 4: Wrought titanium 15-zirconium 4-niobium 4-tantalum alloy
小型船舶.电气装置.对周围可燃气体点火的防护
Small craft -- Electrical devices -- Protection against ignition of surrounding flammable gases
JIS L1018 ERRATUM 1-2001
针织物试验方法(勘误 1)
Test methods for knitted fabrics (Erratum 1)
JIS G7105 ERRATUM 1-2001
热处理钢、合金钢和易切削碳钢.第18部分:非合金钢和低合金钢制光亮产品(勘误 1)
Heat-treatable steels, alloy steels and free-cutting steels -- Part 18: Bright products of unalloyed and low alloy steels (Erratum 1)
JIS C8340 ERRATUM 1-2001
(Erratum 1)
JIS A4706 ERRATUM 1-2000
窗户(勘误1)
Windows (Erratum 1)
JIS A4702 ERRATUM 1-2000
门装置(勘误1)
Doorsets (Erratum 1)
JIS Z8809 ERRATUM 1-2000
校准粘度计用标准液(勘误1)
Standard liquids for calibrating viscometers (Erratum 1)
ISO通用米制螺纹.第1部分:基本轮廓
ISO general purpose metric screw threads -- Part 1: Basic profile
JIS K6718-1 ERRATUM 1-2001
(Erratum 1)
JIS Z3821 ERRATUM 1-2001
不锈钢焊接技术合格鉴定标准程序(勘误1)
Standard qualification procedure for welding technique of stainless steel (Erratum 1)
JIS K0061 ERRATUM 1-2001
化学产品密度和相对密度试验方法(勘误 1)
Test methods for density and relative density of chemical products (Erratum 1)
JIS Z7302-4 ERRATUM 1-2000
密封垃圾的再生燃料.第4部分:灰分的测试方法(勘误1)
Densified refuse derived fuel -- Part 4: Test method for ash (Erratum 1)
JIS Z4910 ERRATUM 1-2000
防散射光栅(勘误1)
Anti-scatter grids (Erratum 1)
JIS L2512 ERRATUM 1-2000
维尼纶缝纫线(勘误1)
Vinylon sewing thread (Erratum 1)
JIS L2511 ERRATUM 1-2000
聚酯缝纫线(勘误1)
Polyester sewing thread (Erratum 1)
JIS L2510 ERRATUM 1-2000
尼龙缝纫线(勘误1)
Nylon sewing thread (Erratum 1)
JIS K2208 ERRATUM 1-2000
沥青乳液(勘误 1)
Asphalt emulsion (Erratum 1)
JIS K6333 AMD 1-2001
气焊设备.焊接、切割和有关加工工艺用橡胶软管(修改件1)
Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (Amendment 1)
航空航天.液压流体的清洁度分类
Aerospace -- Cleanliness classification for hydraulic fluids
塑料.热塑性聚酯(TP)模塑和压塑材料.第2部分:试验样品的制备和特性的测定
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
塑料.热塑性聚酯(TP)模塑和挤塑材料.第1部分:规范的命名体系和基础
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
液压流体动力.电动机特性的测定.第3部分:在恒定流量和恒定扭矩下进行的测定
Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
电力牵引架空线.绞合导线的连接套管
Electric traction overhead lines -- Connecting sleeves of stranded conductors
铸铁用涂焊剂焊条
Covered electrodes for cast iron
低碳钢及低合金钢用惰性气体保护钨极电弧焊条及焊丝
TIG welding rods and solid wires for mild steel and low alloy steel
柴油发动机.喷油设备词汇.第4部分:高压管和管端连接装置
Diesel engines -- Vocabulary of fuel injection equipment -- Part 4: High-pressure pipes and end-connections
小型船.遥控驾驶系统
Small craft -- Remote steering systems
造船.钢丝索剪钳
Shipbuilding -- Wire rope nippers
管道隔热标准规范
Standard specification of thermal insulation for piping
塑料.试验用聚氯乙烯(PVC)糊状物的制备.溶解器法
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
塑料.试验用聚氯乙烯(PVC)糊状物的制备.行星式混合器法
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
拉伸和压缩试验机测力系统的验证和校准
Verification and calibration of the force measuring system of the tension/compression testing machines
工业用编织金属网
Industrial woven wire cloth
机械安全性.防止下肢触及危险区的安全距离
Safety of machinery -- Safety distances to prevent danger zones being reached by the lower limbs
可燃粉尘的爆炸压力和压力上升速率的试验方法
Test method for explosion pressure and rate of pressure rise of combustible dusts
JIS A1143 ERRATUM 1-2001
对轻重量的粗集料中漂浮粒子含量的试验方法(勘误1)
Method of test for content of floating particles in lightweight coarse aggregate (Erratum 1)
JIS A1141 ERRATUM 1-2001
集料中密度低于1.95 g/cm*3的粒子的试验方法(勘误1)
Method of test for particles less than density of 1.95 g/cm*3 in aggregate (Erratum 1)
JIS Z2329 ERRATUM 1-2002
气泡检测渗漏试验方法(勘误1)
Methods for bubble leak testing (Erratum 1)
JIS B1256 ERRATUM 1-2002
普通垫圈(勘误1)
Plain washers (Erratum 1)
六角形铁丝网
Hexagonal wire netting
机械安全性.防止上肢触及危险区的安全距离
Safety of machinery -- Safety distances to prevent danger zones being reached by the upper limbs
无铅焊剂的试验方法.第5部分:焊缝的拉伸试验和剪切试验方法
Test methods for lead-free solders -- Part 5: Methods for tensile tests and shear tests on solder joints
JIS K-2004
颜料试验方法.第1部分:分散特性评估的分散方法.第4节:钢珠研磨机
Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 4: A bead mill
JIS K-2004
颜料试验方法.第1部分:分散特性评估的分散方法.第5节:真空自动研磨机
Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 5: A Hoover automatic muller
土方机械.推土机.第1部分:术语和商业规范
Earth-moving machinery -- Tractor-dozers -- Part 1: Terminology and commercial specifications
涡轮泵术语集
Glossary of terms for turbopumps
施工用旋转式空气压缩机的规范和试验方法的标准形式
Standard form of specifications and tests methods of rotary compressors for construction
流体动力系统和部件.气缸的检验和试验.第2部分:液压气缸的验收试验
Fluid power systems and components -- Inspection and test of cylinders -- Part 2: Acceptance tests for hydraulic cylinders
液压动力系统和部件.气缸的检验和试验.第1部分:气压缸的验收试验
Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders
工业用缝纫机机头分类的标识符号和术语
Identification signs and terms on classification of sewing machine heads for industrial use
工业用缝纫机的绕线轴
Bobbins for industrial sewing machines
近红外分光光度分析法通则
General rules for near-infrared spectrophotometric analysis
高效液相色谱分析法通则
General rules for high performance liquid chromatography
利用模型泵测试泵性能的试验方法
Testing methods for performance of pump, using model pump
叶片向前弯曲的叶片式风扇
Forward-curved bladed fans
电动液压比例安全阀和减压阀的试验方法
Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves
液压气缸的安装尺寸.第3部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径250 mm 至 500 mm)
Mounting dimensions for hydraulic cylinders -- Part 3: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 250 mm to 500 mm)
JIS K5639 ERRATUM 1-2002
氯化的橡胶涂料(勘误1)
Chlorinated rubber paint (Erratum 1)
JIS K5646 ERRATUM 1-2002
槚如树脂底层涂料(勘误1)
Cashew resin undercoats (Erratum 1)
JIS K5651 ERRATUM 1-2002
氨基醇酸树脂涂料(勘误1)
Aminoalkyd resin paint (Erratum 1)
Phosphoric acid
Ammonium chloride
二氯化锡二水合物
Tin (II) chloride dihydrate
Sodium chloride
氯化钡二水化合物
Barium chloride dihydrate
Nitric acid
Silver nitrate
Chloroform
12水二氢生成磷酸二钠
Disodium hydrogenphosphate 12-water
硫酸铜(II)五水合物
Copper (II) sulfate pentahydrate
Sodium sulfate
三元乙丙橡胶(EPDM).评价程序
Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure
异戊橡胶(IR).非充油溶液聚合型.评价程序
Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedure
纸和纸板.耐折叠的测定.斯库普法
Paper and board -- Determination of folding endurance -- Schopper method
Ammonia solution
氯化镁六水合物
Magnesium chloride hexahydrate
Hydrochloric acid
Perchloric acid
Acetic acid
Hydrogen peroxide
Cyclohexane
Potassium dichromate
JIS C-2006
电磁兼容性(EMC).第4-20部分:试验和测量技术.横向电磁波导(TEM)的辐射和抗扰试验
Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques -- Emission and immunity testing in transverse electromagnetic (TEM) waveguides
柠檬酸一水化合物
Citric acid monohydrate
色别规格.国际照明委员会LAB和LUV系统的色带间隔
Colour specification -- CIELAB and CIELUV colour spaces
氯化羟基胺
Hydroxylammonium chloride
液压气动系统及元件.液压缸.元件和识别代码.第7部分:液压流体动力.单杆液压缸、16MPa方形缸盖、系杆固定型
Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 7: Hydraulic fluid power -- Single rod cylinders, 16 MPa square cover, tie rod tightened type mounting dimensions -- Port dimensions
压缩空气.第3部分:湿度测量的试验方法
Compressed air -- Part 3: Test methods for measurement of humidity
液压流体动力.电动机特性的测定.第1部分:在恒定低速和恒压下进行的测定
Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure
耐腐蚀不锈钢紧固件的机械特性.第3部分:无拉伸应力的定位螺钉和类似紧固件
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
常用扭矩型螺母.第1部分:带非金属衬套的六角螺母
Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert
操作型工业机器人.用抓式钳子进行物品传递.词汇和特性表示
Manipulating industrial robots -- Object handling with grasp-type grippers -- Vocabulary and of presentation of characteristics
天花板接线盒
Ceiling rosettes
硫化和热塑橡胶.挠度计试验中温度上升和抗疲劳性的测定
Rubber, vulcanized and thermoplastic -- Determination of temperature rise and resistance to fatigue in flexometer testing
JIS K-2000
水质.生物化学参数的测量.叶绿素浓度的光谱测定法
Water quality -- Measurement of biochemical parameters -- Spectrometric determination of the chlorophyll-a concentration
原锂电池的安全性标准
Safety standard for primary lithium batteries
医疗装置.风险管理.第1部分:风险分析的应用
Medical devices -- Risk management -- Part 1: Application of risk analysis
风险管理系统的开发与实施导则
Guidelines for development and implementation of risk management system
Glass tumblers
生产管理术语汇编
Glossary of terms used in production management
使用标准物质进行的线性校正
Linear calibration using reference materials
探测能力.第1部分:术语和定义
Capability of detection -- Part 1: Terms and definitions
JIS K-2004
颜料试验方法.第12部分:表观密度或表观比容.第2节:机械填塞包装法
Test methods for pigments -- Part 12: Apparent density or apparent specific volume -- Section 2: Mechanically tamped packing method
烟道气体中氨含量的测定方法
Methods for determination of ammonia in flue gas
颜料试验方法.第7部分:抗渗色性
Test methods for pigments -- Part 7: Resistance to bleeding
光学元件和系统图的绘制.第8部分:表面结构
Preparation of drawings for optical elements and systems -- Part 8: Surface texture
光学元件和系统图的绘制.第9部分:表面处理和涂覆
Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating
光学元件和系统图的绘制.第11部分:无公差的数据
Preparation of drawings for optical elements and systems -- Part 11: Non-toleranced data
光学元件和系统图的绘制.第12部分:非球型表面
Preparation of drawings for optical elements and systems -- Part 12: Aspheric surfaces
产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分:判定是否符合技术要求的规则
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications
驱动机械和从动机械.旋转轴高度
Driving and driven machines -- Shaft heights
液压流体动力.液压缸.活塞和杆用方断面轴承圈的盖尺寸
Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
用划痕法测定粗集料中软质颗粒含量的试验方法
Method of test for content of soft particles in coarse aggregate by scratching
用共振法测定混凝土的动态弹性模量、刚性模量及泊松比的试验方法
Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
土方机械.电磁兼容性
Earth-moving machinery -- Electromagnetic compatibility
光纤传输用无源器件的试验方法
Test methods of passive devices for fibre optic transmission
Fiber ribbons
电力牵引架空线.配件.试验方法
Electric traction overhead lines -- Fittings -- Test methods
铁路.轨道词汇
Railway -- Permanent way vocabulary
液压流体动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀. 安装表面
Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
液压流体动力.阀门安装表面和插装式阀腔的识别代码
Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
液压流体动力.减压阀.安装表面
Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
粘合磨料产品.尺寸.第4部分:平面磨/圆周磨砂轮
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
颜料试验方法.第8部分:耐化学腐蚀性
Test methods for pigments -- Part 8: Resistance to chemicals
电动车辆.电动摩托.最大动力试验方法
Electric vehicle -- Electric motors -- Test method of maximum power
液压流体动力.粒子污染分析.从工作系统的作业线上提取流体样品
Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
液压流体动力.液体样品容器.合格鉴定和控制、清洁方法
Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
风力涡轮发电系统.第1部分:安全性要求
Wind turbine generator systems -- Part 1: Safety requirements
JIS Z4510 AMD 1-2001
用快速中子胶片剂量计评估剂量当量的方法(修改单 1)
Methods of evaluating dose equivalent by fast neutron film badges (Amendment 1)
牙科旋转仪器.试验方法
Dental rotary instruments -- Test methods
土方机械.操作人员的人体尺寸和操作者最小空间范围
Earth-moving machinery -- Human physical dimensions of operators and minimum operator space envelope
声学.土方机械发出的外部噪声的测量.动态试验条件
Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Dynamic test conditions
声学.在操作人员位置上测量土方机械发出的噪声.动态试验条件
Acoustics -- Measurement at the operator's position of noise emitted by earth-moving machinery -- Dynamic test conditions
JIS C-2001
家用和类似用途的低压电路连接装置.第2-3部分.作为绝缘穿孔夹紧装置的独立实体的连接装置的特殊要求
Connecting devices for low voltage circuits for household and similar purposes -- Part 2-3: Particular requirements for connecting devices as separate entities with insulation piercing clamping units
JIS C-2001
家用和类似用途的低压电路连接装置.第2-4部分.钢丝扭结装置的特殊要求
Connecting devices for low-voltage circuits for household and similar purposes -- Part 2-4: Particular requirements for twist-on connecting devices
土方机械.液压挖土机.操作人员安全保护装置的实验室试验和性能要求
Earth-moving machinery -- Hydraulic excavators -- Laboratory tests and performance requirements for operator protective guards
光纤维带索
Optical fiber ribbon cords
螺纹极限量规的块规
Gauge blanks for screw threads limit gauges
眼科光学.眼镜架.一般要求和试验方法
Ophthalmic optics -- Spectacle frames -- General requirements and test methods
液压流体动力.液体的在线自动粒子计数系统.校正和验证方法
Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
软件工程.产品评估.第4部分:捕获器程序
Software engineering -- Product evaluation -- Part 4: Process for acquirers
信息技术.程序设计语言.PROLOG语言.第1部分:总核心
Information technology