他的最新文章
他的热门文章
您举报文章：
举报原因：
原文地址：
原因补充：
(最多只允许输入30个字)如何安装无限多软件到外置U盘或硬盘教程 - OPENWRT专版 -
恩山无线论坛 -
Powered by Discuz!
后使用快捷导航没有帐号？
只需一步，快速开始
请完成以下验证码
请完成以下验证码
查看: 28627|回复: 82
如何安装无限多软件到外置U盘或硬盘教程
本帖最后由 freefall12 于
13:18 编辑
硬件小白如我辈,不会换flash,只好想其它办法来解决4M空间不足的问题了.openwrt有两种解决办法,一是通过extroot把整个文件系统挂载到外置存储来运行,还有就是像ddwrt,tt一样，把部分体积大的用户软件安装到U盘,像transmission aria2, python等. 这个比extroot更灵活一些，也更稳定一点，因为不是整个文件系统都放到u盘.废话不多说了，下面说下具体步骤。
1. 通过ssh登入路由,修改/etc/opkg.conf
opkg.conf.jpg (86.24 KB, 下载次数: 7)
13:05 上传
2. 通过上面的修改后，现在可以把软件安装到相应的目录了
opt-install.JPG (29.74 KB, 下载次数: 2)
12:51 上传
3. 安装完之后，并不可以直接运行，还需设置两个环境变量，PATH和LD_LIBRARY_PATH，没有设置好PATH变量，你运行aria2c会提示找不到命令，而LD_LIBARY_PATH没设好就会提示xxlib.so没有找到。打开/etc/profile,加入lib路径和bin路径，如下图.
path.jpg (63.87 KB, 下载次数: 2)
12:52 上传
　　修改后运行一下source /etc/profile
4.现在运行aria2c试下
aria2.jpg (70.77 KB, 下载次数: 2)
12:52 上传
其它不通过uci系统配置的软件也可以按照这个方法来安装，包括python,reaver,aircrack-ng等.安装通过uci系统配置的软件需要还需要拷贝配置文件到相应的目录，这些软件有transmission，samba, mjpg-streamer,ushare,openvirtual**.下面以transmission为例再简单说下这类软件的安装步骤。前面的步骤其实是一样，只是这类软件多了配置文件，主要是/etc/config/和/etc/init.d/下面的，只需要把这些文件拷到对应的目录就好了。所以要把/mnt/sda1/optware/etc/config/transmission 和/mnt/sda1/optware/etc/init.d/transmission分别拷贝到/etc/config/和/etc/init.d/下面，除此之外，还需要把/etc/init.d/transmission里面的/usr/bin/transmission修改为/mnt/sda1/optware/usr/bin/transmission-daemon
tr_init.png (66.54 KB, 下载次数: 2)
12:53 上传
tr_config.jpg (93.32 KB, 下载次数: 2)
12:53 上传
tr.jpg (139.42 KB, 下载次数: 2)
12:54 上传
大功造成，现在可以用/etc/init.d/transmission start启动transmission了
有什么不清楚的地方回帖询问吧
拷贝到 /etc/init.d/ 下面的文件，要注意检查其属性为 0755，否则有可能在 系统/启动项 下启动不了。&
支付宝已转5毛给你！
我的恩山、我的无线
The best wifi forum is right here.
mark备用，谢谢楼主分享
我的恩山、我的无线
The best wifi forum is right here.
多谢分享。
我的恩山、我的无线
The best wifi forum is right here.
我的恩山、我的无线
The best wifi forum is right here.
精彩，马克。。。。
我的恩山、我的无线
The best wifi forum is right here.
支持一下啊
我的恩山、我的无线
The best wifi forum is right here.
我的恩山、我的无线
The best wifi forum is right here.
不错，留名收藏
我的恩山、我的无线
The best wifi forum is right here.
我的恩山、我的无线
The best wifi forum is right here.
好帖，收藏备用。
我的恩山、我的无线
The best wifi forum is right here.
此帖必火，前排留名！{:soso_e133:}
我的恩山、我的无线
The best wifi forum is right here.
非常好，非常实用，学习了。
我的恩山、我的无线
The best wifi forum is right here.
路径不对怎么回事啊，楼主可否详细说下
verify_pkg_installable: Only have 104kb available on filesystem /mnt/sda1/optware/, pkg aria2 needs 702
我的恩山、我的无线
The best wifi forum is right here.
装程序是会显示如此错误，请教楼主是什么原因？
Cannot create symlink from ./usr/lib/libxml2.so.2 to 'libxml2.so.2.7.8': Operation not permitted.
我的恩山、我的无线
The best wifi forum is right here.
mark一下后头折腾
我的恩山、我的无线
The best wifi forum is right here.
Powered byTomato DualWan挂U盘,脱机BT,完整图形教程_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
Tomato DualWan挂U盘,脱机BT,完整图形教程
阅读已结束，下载本文需要
想免费下载本文？
定制HR最喜欢的简历
下载文档到电脑，同时保存到云知识，更方便管理
还剩14页未读，继续阅读
定制HR最喜欢的简历
你可能喜欢查看: 11363|回复: 8
U盘挂载成功，换成移动硬盘就是不识别，不能挂载
U盘挂载成功，换成移动硬盘就是不识别，不能挂载
我用U盘挂载成功，并且脱机下载成功。
现在换成40G移动硬盘，不知道怎么回事不识别了，请教一下 那位能指点一下。
以下是信息：
omitting empty partition (5)
Disk /dev/sda: 40.0 GB,
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe5c668e9
& &Device Boot& && &Start& && && &End& && &Blocks& &Id&&System
/dev/sda1& && && && && &2& && &&&4865& & & & f&&W95 Ext'd (LBA)
/dev/sda5& && && && && &2& && &&&4865& & +& &7&&HPFS/NTFS
/dev/sda5: UUID=&B03EAA&
Linux version 2.6.32.55 (tsl0922@tsl0922-pc) (gcc version 4.3.3 (GCC) ) #5 Sat May 5 14:27:58 CST 2012
Detected Broadcom 0x6358 CPU revision a1
CPU frequency is 300 MHz
32MB of RAM installed
registering 40 GPIOs
board_bcm963xx: CFE version: 1.0.37-10.3
bootconsole [early0] enabled
CPU revision is:
(Broadcom BCM6358)
board_bcm963xx: board name: 96358VW2
Determined physical RAM map:
Initrd not found or empty - disabling initrd
Zone PFN ranges:
&&Normal& &0x -& 0x
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
& & 0: 0x -& 0x
On node 0 totalpages: 8192
free_area_init_node: node 0, pgdat , node_mem_map
&&Normal zone: 64 pages used for memmap
&&Normal zone: 0 pages reserved
&&Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on.&&Total pages: 8128
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 32kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Memory: 2k available (2072k kernel code, 3112k reserved, 366k data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Calibrating delay loop... 299.00 BogoMIPS (lpj=598016)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
bio: create slab &bio-0& at 0
pci .0: reg 10 32bit mmio: [0xx001fff]
Switching to clocksource MIPS
PCI: Enabling device .0 (0000 -& 0002)
PCI: Setting latency timer of device .0 to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device .0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.291:1): initialized
squashfs: version 4.0 () Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)&&(C)
Red Hat, Inc.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
gpiodev: gpio device registered with major 254
gpiodev: gpio platform device registered with access mask FFFFFFFF
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
console [ttyS0] enabled, bootconsole disabled
bcm963xx_flash: 0x at 0x1e000000
bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank
bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
CFI mfr 0x
CFI id&&0x
Amd/Fujitsu Extended Query Table at 0x0040
&&Amd/Fujitsu Extended Query version 1.3.
bcm963xx: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
bcm963xx_flash: Read Signature value of CFE1CFE1
bcm963xx_flash: CFE bootloader detected
bcm963xx_flash: CFE boot tag found with version 6 and board type 96358VW2
bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
bcm963xx_flash: Partition 1 is kernel offset 20100 and length dff00
bcm963xx_flash: Partition 2 is rootfs offset 100000 and length ee0000
bcm963xx_flash: Partition 3 is nvram offset fe0000 and length 20000
bcm963xx_flash: Partition 4 is linux offset 20000 and length fc0000
bcm963xx_flash: Spare partition is 760000 offset and length 880000
Creating 5 MTD partitions on &bcm963xx&:
0x-0x : &CFE&
0x-0x : &kernel&
mtd: partition &kernel& must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
0x-0x00 : &rootfs&
mtd: partition &rootfs& set to be root filesystem
mtd: partition &rootfs_data& created automatically, ofs=760000, len=880000
0x-0x00 : &rootfs_data&
0x00-0x : &nvram&
0x-0x00 : &linux&
内核日志下：
bcm63xx_enet MII bus: probed
bcm63xx_wdt started, timer margin: 30 sec
Registered led device: power
Registered led device: db120:power
Registered led device: dsl
Registered led device: internet
Registered led device: usb
Registered led device: wps
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear &&
All bugs added by David S. Miller &&
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
Button Hotplug driver version 0.3.1
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (2)]
device eth0 entered promiscuous mode
eth1: link forced UP - 100/full - flow control off/off
device eth1.0 entered promiscuous mode
device eth1 entered promiscuous mode
br-lan: port 1(eth1.0) entering forwarding state
Compat-wireless backport release: compat-wireless-
Backport based on wireless-testing.git master-
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
cfg80211: World regulatory domain updated:
cfg80211:& &&&(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:& &&&(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:& &&&(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:& &&&(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:& &&&(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:& &&&(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
roboswitch: Probing device eth0: Failed to enable switch
roboswitch: Probing device eth1: found a 5325! It's a 5350.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PL ]
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
Max Krasnyansky &&
PPP MPPE Compression module registered
ip_tables: (C)
Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
nf_conntrack version 0.5.0 (465 buckets, 1860 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-1: new high speed USB device using bcm63xx_ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
xt_time: kernel timezone is -0000
IMQ driver loaded successfully.
& & & & Hooking IMQ before NAT on PREROUTING.
& & & & Hooking IMQ after NAT on POSTROUTING.
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
(AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
ath_pci: trunk
wlan: trunk
wlan: mac acl policy registered
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
Micrel/Kendin KS8995 Ethernet switch SPI driver version 0.1.1
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
fuse init (API version 7.13)
b43-phy0: Loading firmware version 508.-01-14 01:32:01)
scsi 0:0:0:0: Direct-Access& &&&ST340810 A& && && && && & 0000 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] -byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
usb-storage: device scan complete
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 & sda5 &
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
wlan0: authenticate with 00:16:e3:b5:a0:dd (try 1)
wlan0: authenticated
wlan0: associate with 00:16:e3:b5:a0:dd (try 1)
wlan0: RX AssocResp from 00:16:e3:b5:a0:dd (capab=0x411 status=0 aid=1)
wlan0: associated
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT4-fs (sda1): unable to read superblock
attempt to access beyond end of device
sda1: rw=0, want=18, limit=2
REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 8, size 1024)
attempt to access beyond end of device
sda1: rw=0, want=130, limit=2
REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 64, size 1024)
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT3-fs: unable to read superblock
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT2-fs: unable to read superblock
mini_fo: create_sto_dir: ERROR creating sto dir.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
usb 1-1: USB disconnect, address 2
usb 1-2: new high speed USB device using bcm63xx_ehci and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access& &&&ST340810 A& && && && && & 0000 PQ: 0 ANSI: 0
usb-storage: device scan complete
sd 1:0:0:0: [sda] -byte logical blocks: (40.0 GB/37.2 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 & sda5 &
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI disk
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT4-fs (sda1): unable to read superblock
attempt to access beyond end of device
sda1: rw=0, want=18, limit=2
REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 8, size 1024)
attempt to access beyond end of device
sda1: rw=0, want=130, limit=2
REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 64, size 1024)
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT3-fs: unable to read superblock
attempt to access beyond end of device
sda1: rw=0, want=4, limit=2
EXT2-fs: unable to read superblock
mini_fo: create_sto_dir: ERROR creating sto dir.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
mini_fo: create_sto_file: ERROR creating sto file.
系统日志：
Aug 18 21:01:52 DreamBox user.crit kernel: mini_fo: create_sto_dir: ERROR creating sto dir.
Aug 18 21:01:52 DreamBox user.notice fstab: mkdir: cannot create directory '/mnt/sda5': No space left on device
Aug 18 21:01:53 DreamBox user.info sysinit: Loading rules
Aug 18 21:01:53 DreamBox user.info sysinit: Sending discover...
Aug 18 21:01:53 DreamBox user.info sysinit: Sending select for 192.168.1.2...
Aug 18 21:01:54 DreamBox user.info sysinit: Lease of 192.168.1.2 obtained, lease time 2851200
Aug 18 21:01:54 DreamBox user.info sysinit: udhcpc: ifconfig wlan0 192.168.1.2 netmask 255.255.255.0 broadcast +
Aug 18 21:01:54 DreamBox user.info sysinit: Loading includes
Aug 18 21:01:54 DreamBox user.info sysinit: Optimizing conntrack
Aug 18 21:01:54 DreamBox user.info sysinit: udhcpc: setting default routers: 192.168.1.1
Aug 18 21:01:54 DreamBox user.info sysinit: Loading interfaces
Aug 18 21:01:55 DreamBox user.info sysinit: udhcpc: setting dns servers: 192.168.1.1
Aug 18 21:01:55 DreamBox user.info firewall: adding lan (br-lan) to zone lan
Aug 18 21:01:57 DreamBox user.info sysinit: /lib/nwan/route: line 4: can't create /tmp/nwan/nwanroute_new.pid: nonexistent directory
Aug 18 21:01:57 DreamBox user.info sysinit: cat: can't open '/tmp/nwan/nwanroute_old.pid': No such file or directory
Aug 18 21:01:57 DreamBox user.info sysinit: sh: you need to specify whom to kill
Aug 18 21:01:57 DreamBox user.info sysinit: cp: cannot stat '/tmp/nwan/nwanroute_new.pid': No such file or directory
Aug 18 21:01:57 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 18 21:01:57 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 18 21:01:57 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 18 21:01:57 DreamBox user.info firewall: adding wwan (wlan0) to zone wan
Aug 18 21:02:01 DreamBox authpriv.info dropbear[2076]: Running in background
Aug 18 21:02:01 DreamBox user.info sysinit: rule start...
Aug 18 21:02:01 DreamBox user.info sysinit: rule start...
Aug 18 21:02:01 DreamBox user.info sysinit: rule start...
Aug 18 21:02:01 DreamBox user.info sysinit: rule start...
Aug 18 21:02:01 DreamBox user.notice ifup: Allowing Router Advertisements on wwan (wlan0)
Aug 18 21:02:02 DreamBox user.info sysinit: enable=1
Aug 18 21:02:02 DreamBox user.info sysinit: start vsftpd....
Aug 18 21:02:03 DreamBox user.info firewall: removing wwan (wlan0) from zone wan
Aug 18 21:02:04 DreamBox user.notice root: starting ntpclient
Aug 20 21:43:37 DreamBox user.info sysinit: line 97
Aug 20 21:43:37 DreamBox user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Aug 20 21:43:37 DreamBox user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Aug 20 21:43:38 DreamBox user.info firewall: adding wwan (wlan0) to zone wan
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: started, version 2.55 cachesize 150
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Aug 20 21:43:41 DreamBox daemon.info dnsmasq-dhcp[2284]: DHCP, IP range 192.168.2.100 -- 192.168.2.250, lease time 12h
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: using local addresses only for domain lan
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: reading /tmp/resolv.conf.auto
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: using nameserver 192.168.1.1#53
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: using local addresses only for domain lan
Aug 20 21:43:41 DreamBox daemon.info dnsmasq[2284]: read /etc/hosts - 1 addresses
Aug 20 21:43:41 DreamBox daemon.info dnsmasq-dhcp[2284]: read /etc/ethers - 0 addresses
Aug 20 21:43:42 DreamBox user.info sysinit: start qos v4........
Aug 20 21:43:42 DreamBox user.info sysinit: qosv4 enable=0
Aug 20 21:43:43 DreamBox user.info sysinit: qos_scheduler = 0
Aug 20 21:43:43 DreamBox user.info sysinit: /usr/bin/qosv4: .: line 1: can't open '/lib/cron/common.sh'
Aug 20 21:43:43 DreamBox user.info sysinit: enable=
Aug 20 21:43:43 DreamBox user.info sysinit: stop smb...
Aug 20 21:43:43 DreamBox user.info sysinit: killall: smbd: no process killed
Aug 20 21:43:43 DreamBox user.info sysinit: killall: nmbd: no process killed
Aug 20 21:43:43 DreamBox user.info sysinit: game&&start.....
Aug 20 21:43:43 DreamBox user.info sysinit: uci: Entry not found
Aug 20 21:43:43 DreamBox user.info sysinit: uci: Invalid argument
Aug 20 21:43:43 DreamBox user.info sysinit: killall: crond: no process killed
Aug 20 21:43:44 DreamBox user.info sysinit: /usr/lib/ddns/dynamic_dns_updater.sh: .: line 1: can't open '/lib/cron/common.sh'
Aug 20 21:43:44 DreamBox user.info sysinit: cat: can't open '/tmp/nwan/nwanroute_old.pid': No such file or directory
Aug 20 21:43:44 DreamBox user.info sysinit: sh: you need to specify whom to kill
Aug 20 21:43:44 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 20 21:43:44 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 20 21:43:44 DreamBox user.info sysinit: iptables: Chain already exists.
Aug 20 21:43:46 DreamBox user.info sysinit: rule start...
Aug 20 21:43:46 DreamBox user.info sysinit: rule start...
Aug 20 21:43:46 DreamBox user.info sysinit: rule start...
Aug 20 21:43:46 DreamBox user.info sysinit: rule start...
系统日志中：
Aug 20 21:43:46 DreamBox user.info sysinit: uci: Invalid argument
Aug 20 21:43:47 DreamBox user.info sysinit: killall: crond: no process killed
Aug 20 21:43:47 DreamBox user.info sysinit: sed: bad option in substitution expression
Aug 20 21:43:47 DreamBox user.info sysinit: sed: bad option in substitution expression
Aug 20 21:43:50 DreamBox user.info sysinit: rm: cannot remove '/mnt/sda1/mldonkey/mlnet.byte.static': No such file or directory
Aug 20 21:43:50 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:43:50 DreamBox user.info sysinit: gunzip: can't open '/mnt/sda1/mldonkey/mlnet.byte.static.tar': No space left on device
Aug 20 21:43:50 DreamBox user.info sysinit: tar: can't open '/mnt/sda1/mldonkey/mlnet.byte.static.tar': No such file or directory
Aug 20 21:43:50 DreamBox user.info sysinit: rm: cannot remove '/mnt/sda1/mldonkey/mlnet.byte.static.tar': No such file or directory
Aug 20 21:43:50 DreamBox user.info sysinit: isnotddnas
Aug 20 21:43:51 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:43:51 DreamBox user.info sysinit: cp: cannot create '/mnt/sda1/mldonkey/downloads.ini': No space left on device
Aug 20 21:43:51 DreamBox user.info sysinit: /etc/rc.common: eval: line 1: /mnt/sda1/mldonkey/mlnet.byte.static: not found
Aug 20 21:43:52 DreamBox user.info sysinit: /etc/rc.common: eval: line 1: can't create /mnt/sda1/transmission/settings.json: No space left on device
Aug 20 21:43:55 DreamBox user.info sysinit: &: &0.0.0.0&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &::&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &/mnt/sda1/transmission/done&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &/mnt/sda1/transmission/incomplete&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &default&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &0.0.0.0&,
Aug 20 21:43:55 DreamBox user.info sysinit: &: &/transmission/&,
Aug 20 21:43:55 DreamBox user.info sysinit: &invalid-key&: false
Aug 20 21:43:55 DreamBox user.info sysinit: }
Aug 20 21:43:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:43:59 DreamBox daemon.notice vnstatd[2876]: vnStat daemon 1.11 started.
Aug 20 21:43:59 DreamBox daemon.notice vnstatd[2876]: Monitoring: br-lan eth0
Aug 20 21:44:00 DreamBox daemon.err transmission-daemon[2857]: UDP Failed to set receive buffer: requested 4194304, got 225280 (tr-udp.c:75)
Aug 20 21:44:00 DreamBox daemon.err transmission-daemon[2857]: UDP Failed to set send buffer: requested 1048576, got 225280 (tr-udp.c:86)
Aug 20 21:44:00 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/settings.json.tmp.5cawLn&: No space left on device (bencode.c:1734)
Aug 20 21:48:29 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 Piece 1516, which was just downloaded, failed its checksum test (peer-mgr.c:1791)
Aug 20 21:49:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:49:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 write failed for &SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4&: No space left on device (inout.c:132)
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 No space left on device (/mnt/sda1/transmission/done/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4) (torrent.c:487)
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: Error while flushing completed pieces from cache (session.c:539)
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/resume/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4.10da3c68593afe6b.resume.tmp.heHHfE&: No space left on device (bencode.c:1734)
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 Unable to save resume file: No space left on device (torrent.c:487)
Aug 20 21:49:58 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/stats.json.tmp.9mlDmb&: No space left on device (bencode.c:1734)
Aug 20 21:49:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:49:59 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 write failed for &SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4&: No space left on device (inout.c:132)
Aug 20 21:49:59 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/resume/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4.10da3c68593afe6b.resume.tmp.Jojwsh&: No space left on device (bencode.c:1734)
Aug 20 21:49:59 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 Unable to save resume file: No space left on device (torrent.c:487)
Aug 20 21:53:53 DreamBox user.info kernel: usb 1-1: USB disconnect, address 2
Aug 20 21:53:55 DreamBox user.info kernel: usb 1-2: new high speed USB device using bcm63xx_ehci and address 3
Aug 20 21:53:55 DreamBox user.info kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 20 21:53:55 DreamBox user.info kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Aug 20 21:53:55 DreamBox user.debug kernel: usb-storage: device found at 3
Aug 20 21:53:55 DreamBox user.debug kernel: usb-storage: waiting for device to settle before scanning
Aug 20 21:53:55 DreamBox user.notice usb-modeswitch: 1-2:1.0: Manufacturer=? Product=? Serial=D
Aug 20 21:54:00 DreamBox user.notice kernel: scsi 1:0:0:0: Direct-Access& &&&ST340810 A& && && && && & 0000 PQ: 0 ANSI: 0
Aug 20 21:54:00 DreamBox user.debug kernel: usb-storage: device scan complete
Aug 20 21:54:00 DreamBox user.notice kernel: sd 1:0:0:0: [sda] -byte logical blocks: (40.0 GB/37.2 GiB)
Aug 20 21:54:00 DreamBox user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off
Aug 20 21:54:00 DreamBox user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 27 00 00 00
Aug 20 21:54:00 DreamBox user.err kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Aug 20 21:54:00 DreamBox user.err kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Aug 20 21:54:00 DreamBox user.info kernel:&&sda: sda1 &
Aug 20 21:54:00 DreamBox user.info kernel:&&sda5 &
Aug 20 21:54:00 DreamBox user.err kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Aug 20 21:54:00 DreamBox user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk
Aug 20 21:54:05 DreamBox user.notice fstab: NTFS signature is missing.
Aug 20 21:54:05 DreamBox user.notice fstab: Failed to mount '/dev/sda1': Invalid argument
Aug 20 21:54:05 DreamBox user.notice fstab: The device '/dev/sda1' doesn't seem to have a valid NTFS.
Aug 20 21:54:05 DreamBox user.notice fstab: Maybe the wrong device is used? Or the whole disk instead of a
Aug 20 21:54:05 DreamBox user.notice fstab: partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Aug 20 21:54:05 DreamBox user.info kernel: attempt to access beyond end of device
Aug 20 21:54:05 DreamBox user.info kernel: sda1: rw=0, want=4, limit=2
Aug 20 21:54:05 DreamBox user.err kernel: EXT4-fs (sda1): unable to read superblock
Aug 20 21:54:05 DreamBox user.info kernel: attempt to access beyond end of device
Aug 20 21:54:05 DreamBox user.info kernel: sda1: rw=0, want=18, limit=2
Aug 20 21:54:05 DreamBox user.warn kernel: REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 8, size 1024)
Aug 20 21:54:05 DreamBox user.info kernel: attempt to access beyond end of device
Aug 20 21:54:05 DreamBox user.info kernel: sda1: rw=0, want=130, limit=2
Aug 20 21:54:05 DreamBox user.warn kernel: REISERFS warning (device sda1): sh-2006 read_super_block: bread failed (dev sda1, block 64, size 1024)
Aug 20 21:54:05 DreamBox user.info kernel: attempt to access beyond end of device
Aug 20 21:54:05 DreamBox user.info kernel: sda1: rw=0, want=4, limit=2
Aug 20 21:54:05 DreamBox user.err kernel: EXT3-fs: unable to read superblock
Aug 20 21:54:05 DreamBox user.info kernel: attempt to access beyond end of device
Aug 20 21:54:05 DreamBox user.info kernel: sda1: rw=0, want=4, limit=2
系统日志下：
Aug 20 21:54:05 DreamBox user.warn kernel: EXT2-fs: unable to read superblock
Aug 20 21:54:09 DreamBox user.crit kernel: mini_fo: create_sto_dir: ERROR creating sto dir.
Aug 20 21:54:09 DreamBox user.notice fstab: mkdir: cannot create directory '/mnt/sda5': No space left on device
Aug 20 21:55:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:55:58 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 write failed for &SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4&: No space left on device (inout.c:132)
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 No space left on device (/mnt/sda1/transmission/done/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4) (torrent.c:487)
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: Error while flushing completed pieces from cache (session.c:539)
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/resume/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4.10da3c68593afe6b.resume.tmp.flE12p&: No space left on device (bencode.c:1734)
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 Unable to save resume file: No space left on device (torrent.c:487)
Aug 20 21:55:59 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/stats.json.tmp.PmNGeA&: No space left on device (bencode.c:1734)
Aug 20 21:55:59 DreamBox user.crit kernel: mini_fo: create_sto_file: ERROR creating sto file.
Aug 20 21:56:00 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 write failed for &SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4&: No space left on device (inout.c:132)
Aug 20 21:56:00 DreamBox daemon.err transmission-daemon[2857]: Couldn't save temporary file &/mnt/sda1/transmission/resume/SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4.10da3c68593afe6b.resume.tmp.hyJ4oA&: No space left on device (bencode.c:1734)
Aug 20 21:56:00 DreamBox daemon.err transmission-daemon[2857]: SexArt - Love at First Sight - Silvie Deluxe [1080p].mp4 Unable to save resume file: No space left on device (torrent.c:487)
看看挂载方式对不对
已经解决了& &格式化问题& &刚才格式化是逻辑磁盘& &现在改成主分区可以了&&可以正常使用
就是想再问问&&单线多拨是不是必须是一级路由位置才行&&我现在是二级路由有op。
试了一下，想把电话线改到我屋子里，穿线管堵了 过不来& &不能直接接电话线&&郁闷
看看挂载方式对不对
Powered by