签到成功!您今天第{todayrank}个签到，签到排名竞争激烈，记得每天都来签到哦！签到日记2013-06已连续签到:{constant}天，累计签到:{days}天
查看: 1517|回复: 1
有人广电用的是创维HC2600高清机顶盒吗
-3132/0主题帖子积分
, 积分 -3132, 距离下一级还需 3132 积分
有人广电用的是创维HC2600高清机顶盒吗
242/300排名<font color="#FF昨日变化主题帖子积分
, 积分 242, 距离下一级还需 58 积分
应用推荐 /4
直播：电视家直播就是高清！
点播：爱奇艺优酷搜狐乐视！
美女：性感清纯衣服就是少！
智能：遥控电视瞬间变电脑！
更长更丰富的首页，精彩内容看不停
新增多个细分频道，发现更大的世界
少儿频道全新登场，小朋友们都爱看
“瀑布流”新布局，增加了个性化推荐
优酷TV版最新版，下载即可观看
海量高清免费电影、电视剧片源，
拥有业界最丰富的节目资源，
舒适休闲的视频观看体验。
画面清晰 播放流畅 界面友好；
最新电影、3D大片、电视剧；
最全独家动漫、1080P高清；
海量综艺娱乐内容，免费观看。创维数字机顶盒使用方法是怎样的？
创维数字机顶盒使用方法是怎样的？
被浏览6173次
我来帮他解答
创维机顶盒破解方法
破解方法一、下载路由器配置(适用于带有FTP开放权限的路由器)
　　现在电信的定制设备(主要是ADSL猫和宽带路由器)基本上都有FTP的功能，在路由器的背面或者说明书中可以找到普通用户权限的用户名(一般为useradmin)和登录密码，使用此用户进入路由器打开路由器的FTP功能，然后使用windows自带的FTP客户端(IE，资源管理器均可)登录到FTP服务器然后下载路由器的配置文档(一般为csv或者conf)，然后用文本编辑器打开下载的配置文档，搜索telecomadmin(电信管理员用户名)，在找到的字段后寻找带有password的字段，此字段的内容就是管理员用户的密码。
　　破解方法二、使用简单的页面猜测(适用于软件设计较简单的路由器)
　　使用电信的普通用户登录路由器，找到更改密码的页面，查看页面的源文件，然后在里面搜索telecomadmin或者password之类的字段，看看能不能找到管理员密码(新型号设备破解几率很小)。
创维数字机顶盒使用方法： 一、有线数字电视机顶盒 1、首先将有线信号线（白色）接入机顶盒后板的信号输入口； 2、再用音频线和视频线【音频线（红和白），视频线（黄）】相对应颜色连接机顶盒与电视。
创维数字电视遥控器和机顶盒的使用方法：
1、先将室外的有线数字电视信号线插入机顶盒的信号输入接口；
2、准备一条AV复合视频线，一头插入机顶盒的AV输出接口，另一头插入电视机的AV输入接口，注意插头和接口的颜色要一一对应；
3、启动电视机和机顶盒，使用电视机的遥控器，将电视机的信号源切换为【AV模式】，即可显示出机顶盒的启动画面，表示机顶盒和电视机已经连接成功；
4、接下来使用机顶盒的遥控器，对准机顶盒，按下【菜单】键，找到【频道搜索】，按【确认】键，选择【自动搜索】，再按【确认】键开始自动搜台；
5、搜台完成后，电视机的画面会跳转至数字电视节目的播放界面，用户可以使用机顶盒遥控器的【频道+】和【频道-】键进行换台。
希望能够帮到你。
热心网友&回答：　机顶盒遥控器在按键面板上增加了一个学习按键区域，进行两部遥控器间的学习操作时，要求电视机和机顶盒的遥控器水平正对，红外线发码、收码方向成一条直线，两设备间保持3厘米左右的距离。
　　1.长按机顶盒遥控器设置键3秒以上，机顶盒遥控器上端LED将从暗亮至明亮并常亮后。
　　2.按机顶盒遥控器要学习的键一下后松开，机顶盒遥控器上端LED灯开始闪烁。
　　3.接着将电视机遥控器被学习对应的按键对准机顶盒遥控器的发射管(位于遥控器顶端中间的白色管)按下按键不要松开，至机顶盒遥控器上端LED灯闪动三次，表示已经接受到信号，此按键功能已经学习。
　　4.继续按第2步开始的操作，学习完其余按键后再按下学习设置键，红色指示灯灭，即可正常工作。
奋斗_9500&回答：1：将机顶盒遥控器与原电视机遥控器红外线发射管对准在同一直线上，距离不超过5厘米。2：按住机顶盒学习遥控器“设置”键3秒，见到遥控器上的指示灯又稍暗变更亮且常亮时，再按机顶盒学习遥控器上想要学习的按键，例如“电视机电源键”，看到指示灯变为闪烁后，按下电视机遥控上相对应的“电视机电源键”，直到机顶盒学习型遥控器上的指示灯恢复常亮为止，此时再按一下学习遥控器上的“设置”键，指示灯灭，学习成功一个。3：先到电视机上试一试刚刚学习成功的按键是否可用，不行的话就再重复学一遍（注意：有的在重配过电视机遥控器的基础上进行的学习，可能会始终无法学习成功或成功后过几天又失效了，此时你只有找到电视机原装遥控器进行重新学习。）4：继续完成其他按键的学习。（学习型遥控器一般来说只学习原电视机遥控的“电视机电源”、“音量或频道”、“TV/AV切换键”）
随意夜风&回答：创维机顶盒c2100的价格如下所示；
创维(Skyworth)百度影棒3S 真4K网络机顶盒￥299
创维(Skyworth) i71S二代 64位真8核网络电视机顶盒￥329
以上价格来源于网络，仅供参考，具体价格以购买时为准
xiaoping123&回答：创维iptv机顶盒机顶盒系统设置密码是4个0。
1、输入密码后就能解锁，密码可以查看说明书的初始密码（没有被改过情况下）。
2、按机顶盒的遥控器上的“菜单”，进入系统设置，找到“设置密码”有个选项“节目锁”，把节目锁的修改为未启用即可。
3、按机顶盒的遥控器上的“菜单”，进入系统设置，找到“恢复出厂设置”，确定即可恢复出厂设置，然后提示重新搜索节目，点击确定即可，等搜索完节目之后就可以正常观看电视了。
一绽微笑放开悲伤&回答：创维HC2600高清机顶盒 价格为9元
创维高清有线电视机顶盒HC2600 价格为65元
以上信息来自网络
具体以实物为准 希望对你有所帮助
设计本将严格保护您的隐私,请放心填写
手机设计本
随时提问题，随意赏美图
设计本官方微信
扫描二维码，即可与本本亲密互动，还有更多美图等你来看！
免责声明：本网站部分内容由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
(C)2012 设计本-定制化装修设计服务平台, All
Rights Reserved. ()接好了TTL的线但无法中断CFE的启动过程，机器是创维HC2600，广东有线U宽频的定制机 - TOMATO专版 -
恩山无线论坛 -
Powered by Discuz!
后使用快捷导航没有帐号？
只需一步，快速开始
请完成以下验证码
请完成以下验证码
查看: 12682|回复: 4
接好了TTL的线但无法中断CFE的启动过程，机器是创维HC2600，广东有线U宽频的定制机
本帖最后由 我真名叫WuKaoSh 于
21:46 编辑
题外话：固件是最新版本的，各位在使用广东有线的U宽频的话，可于以下内网网址下载升级固件，最大的改进是该固件已经提供自动登录中国移动的家庭宽带功能，不再需要自己做WEB认证
以上网址提供了创维HC2600及同洲的固件。
这些天都想折腾这机器，我的机器是创维HC2600，是个一体机，带CABLE MODEM功能，路由器功能及机顶盒功能
路由器的CPU配置是BCM5356CO，我见过有某些HC2600的机器是BCM5357，Flash大小是8MB SPI，内存是DDR 32MB的， 我已经接好了TTL的线，但用过CTRL+C的方法，无法中断CFE的启动过程，请教各位如何才可以终止它？
其实我折腾这机器，原因是创维为广东有线写的固件实在太烂了，在基于BCM公版固件的基础上开发的，但是阉割了十分多的功能，而且有些功能还写得不完整
因此我在想，能否把TOMATO折腾刷入该机？ 请各位帮帮忙吧，先行谢谢各位~~~~
附上TTL的启动过程日志， 从TTL日志可得知，连接该机发射出的CMCC的信号的话，会带有一个DHCP OPTION 60的字段值，该值是GCableSSID
Decompressing...done
CFE version 5.100.138.23 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Mon Dec 17 14:53:44 CST 2012 () Copyright (C)
Broadcom Corporation.
Init Arena Init Devs. Boot partition size = x20000) Found an ST compatible serial flash with 128 64KB total size 8MB et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.23 CPU type 0x1MHz Tot mem: 32768 KBytes
CFE mem:& & 0x - 0x6992) Data:& && & 0x8072EF50 - 0x (12880) BSS:& && &&&0x - 0x84) Heap:& && & 0x - 0x9600) Stack:& && &0x - 0x92) Text:& && & 0x - 0x2336)
Device eth0:&&hwaddr 5C-C6-D0-70-E3-4E, ipaddr 192.168.88.254, mask 255.255.255.0 & && &&&gateway not set, nameserver not set Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: Failed. Could not load :: Timeout occured verify trx data success. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 2443256 bytes read Entry at 0x Closing network. Starting program at 0x Linux version 2.6.21.5 () (gcc version 4.2.3) #129 Thu Oct 31 20:46:43 CST 2013 Found an ST compatible serial flash with 128 64KB total size 8MB Serial flash device: name SFLASH 8192 kB, id 0x0000 size 8192KB
prom init CPU revision is:
get sflash size=8388608 B Total Flash size: 8192K with 128 sectors Flash split 8 : AuxFS[720896] Determined physical RAM map:
(usable) On node 0 totalpages: 8192 &&DMA zone: 32 pages used for memmap &&DMA zone: 0 pages reserved &&DMA zone: 4064 pages, LIFO batch:0 &&Normal zone: 32 pages used for memmap &&Normal zone: 4064 pages, LIFO batch:0 Built 1 zonelists.&&Total pages: 8128 Kernel command line: root=31:2 ro noinitrd console=ttyS0,115200 brcm mips: enabling icache and dcache... Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (22 instructions). Synthesized TLB load handler fastpath (34 instructions). Synthesized TLB store handler fastpath (34 instructions). Synthesized TLB modify handler fastpath (33 instructions). PID hash table entries: 128 (order: 7, 512 bytes) CPU: BCM53572 rev 1 at 300 MHz Using 150.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 2k available (1958k kernel code, 2820k reserved, 329k data, 96k init, 0k highmem) KLOB Pool 1 Initialized: 1048576 bytes &0x ... 0x& Calibrating delay loop... 148.99 BogoMIPS (lpj=74496) Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCI: no core PCI: no core PCI: Fixing up bus 0 BLOG v2.1 Initialized Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered squashfs: version 3.2-r2 () Phillip Lougher squashfs: LZMA suppport for slax.org by jro JFFS2 version 2.2. (C)
Red Hat, Inc. io scheduler noop registered (default) Serial:
driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A PPP generic driver version 2.4.2 NET: Registered protocol family 24 pflash: found no supported devices sflash: squash filesystem with lzma found at block 995 Creating 9 MTD partitions on &sflash&: 0xx : &boot& 0xx : &linux& 0x000f8e00-0x : &rootfs& 0xx007b0000 : &auxfs& 0x007bc0000 : &log& 0x007cd0000 : &backpsi& 0x007de0000 : &sp& 0x007ef0000 : &psi& 0x007f00000 : &nvram& brcmboard: brcm_board_init entry PCI: Setting latency timer of device .0 to 64 bcmsw: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.23 eth0: MAC Address: 5C:C6:D0:70:E3:4E eth1: MAC Address: 5C:C6:D0:70:E3:4E eth2: MAC Address: 5C:C6:D0:70:E3:4E eth3: MAC Address: 5C:C6:D0:70:E3:4E eth4: MAC Address: 5C:C6:D0:70:E3:4E Mirror/redirect action on u32 classifier & & input device check on
& & Actions configured
TCP cubic registered NET: Registered protocol family 1 KLOB extended to 2 pools NET: Registered protocol family 17 Initializing MCPD Module Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear && All bugs added by David S. Miller && VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 96k freed KLOB extended to 3 pools init started:&&BusyBox v1.00 (-06:07+0000) multi-call binary
BusyBox v1.00 (-06:07+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
pktflow: module license 'Proprietary' taints kernel. Broadcom Packet Flow Cache&&Char Driver v2.1 Sep 13 :17 Registered&242& NBUFF v1.0 Initialized Broadcom Packet Flow Cache learning via BLOG enabled. Created Proc FS /procfs/fcache Broadcom Packet Flow Cache registered with netdev chain Constructed Broadcom Packet Flow Cache v2.1 Sep 13 :16 eth0 Link DOWN eth1 Link DOWN eth2 Link DOWN eth3 Link DOWN eth4 Link DOWN eth0 Link UP 100 mbps full duplex eth1 Link UP 100 mbps full duplex wl_module_init: passivemode set to 0x0 PCI: Setting latency timer of device .0 to 64 KLOB extended to 4 pools wl0: Broadcom BCM Wireless Controller 5.100.138.23 (WLTEST) 164 167
===== Release Version 4.04L.CT_02.v1.7 (build timestamp 6) =====
Adjust WLAN Configuration, has configuration [1], num [4], defaultnum [4] interface eth0_1 does not exist! SIOCGIFFLAGS: No such device device eth1 entered promiscuous mode br2: port 1(eth1) entering learning state br2: topology change detected, propagating br2: port 1(eth1) entering forwarding state device eth2 entered promiscuous mode br2: port 2(eth2) entering learning state br2: topology change detected, propagating br2: port 2(eth2) entering forwarding state device eth3 entered promiscuous mode br2: port 3(eth3) entering learning state br2: topology change detected, propagating br2: port 3(eth3) entering forwarding state device eth4 entered promiscuous mode br2: port 4(eth4) entering learning state br2: topology change detected, propagating br2: port 4(eth4) entering forwarding state ssk:error:9.728:rutPMap_addAvailableInterface:793:avail InterfaceReference InternetGatewayDevice.WANDevice.3.WANConnectionDevice.1.WANIPConnection.1 already exists interface eth0_1 does not exist! interface eth0_1 does not exist! SIOCGIFFLAGS: No such device ssk:error:10.060:rutPMap_addAvailableInterface:793:avail InterfaceReference InternetGatewayDevice.WANDevice.3.WANConnectionDevice.1.WANIPConnection.2 already exists entered, iidStack={} --------------system boots up-----------------
-------Enable bandwidth set----------------- WLmngr Daemon is running optarg=0 shmId=0
(ssk) EthernetWan eth0 link up device eth0_1 entered promiscuous mode br1: port 1(eth0_1) entering learning state br1: topology change detected, propagating br1: port 1(eth0_1) entering forwarding state All services associated with eth0_1 is activated. WEBUI Operation WPS Type is NONE, interface number is [1] WEBUI Operation WPS Type is NONE, interface number is [2] WEBUI Operation WPS Type is NONE, interface number is [3] WEBUI Operation WPS Type is NONE, interface number is [4] device wl0 is not a slave of br1 interface wl0.1 does not exist! interface wl0.2 does not exist! interface wl0.3 does not exist! ssk:error:11.977:cmsObj_set:474:set of InternetGatewayDevice.Layer3Forwarding.Forwarding.{i}. {5} failed ssk:error:11.977:rutPmap_doPolicyRoutingOnWanIfc:1687:Failed to set L3ForwardingEntryObject, ret = 9003 ip_tables: (C)
Netfilter Core Team KLOB extended to 5 pools Setting SSID: &CMCC& Setting SSID: &USER_710EB0& Setting SSID: &USER_3& Setting SSID: &USER_4& Netfilter messages via NETLINK v0.30. wlctl: Unsupported nf_conntrack version 0.5.0 (256 buckets, 2048 max) ssk:error:14.851:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:14.857:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:14.863:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:14.864:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:14.870:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:14.876:rutNtwk_getActiveDnsIp:441:No active dns info found. RTNETLINK answers: No such process RTNETLINK answers: Invalid argument RTNETLINK answers: Invalid argument All services associated with eth0_2 is activated. ssk:error:15.484:rutNtwk_getActiveDnsIp:441:No active dns info found. ssk:error:15.490:rutNtwk_getActiveDnsIp:441:No active dns info found. Save IPOE Config successful! -&IPoEStatus : 1 Save IPOE Config successful!
-&[wlmngr_doQoSKLOB extended to 6 pools ][2090]debug here : apply Qos Setting on ifn [wl0]
-&[wlmngr_doQoS][2090]debug here : apply Qos Setting on ifn [wl0.1] device wl0 entered promiscuous mode device wl0.1 entered promiscuous mode device wl0.2 entered promiscuous mode device wl0.3 entered promiscuous mode ACS Policy: Bg Noise threshold: 0 Interference threshold: 100 Channel Scoring Weights:
& && && &BSS: -1 & && && &BUSY: 0 & && && &INTF: 0 & && && &INTFADJ: 0 & && && &FCS: 0 & && && &TXPWR: 0 & && && &BGNOISE:br1: port 2(wl0) entering learning state
0 & && && &CNS: 1 wlbr1: topology change detected, propagating 0: Operation notbr1: port 2(wl0) entering forwarding state
supported br2: port 5(wl0.1) entering learning state br2: topology change detected, propagating br2: port 5(wl0.1) entering forwarding state ACSD &&acsd_chanim_init(72): failed to set chanim_sample_periodacsd: scan in progress ... acsd: scan in progress ... Reaped 1228 UPnP daemon is ready to run acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... wl0: Operation not supported ACSD &&acsd_chanim_query(500): failed to get chanim resultsret code: -1 dhcpc:error:21.707:udhcpc:628:No lease time with ACK, using 20 second lease [early_auth][557] logging from stb without permission checked! httpd:error:21.975:rutNtwk_getActiveDnsIp:441:No active dns info found. httpd:error:21.976:rutNtwk_getActiveDnsIp:441:No active dns info found. [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:31.709:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:41.711:udhcpc:628:No lease time with ACK, using 20 second lease httpd:error:42.121:rutNtwk_getActiveDnsIp:441:No active dns info found. httpd:error:42.122:rutNtwk_getActiveDnsIp:441:No active dns info found. dhcpc:error:51.712:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:61.713:udhcpc:628:No lease time with ACK, using 20 second lease [early_auth][557] logging from stb without permission checked! httpd:error:62.185:rutNtwk_getActiveDnsIp:441:No active dns info found. httpd:error:62.186:rutNtwk_getActiveDnsIp:441:No active dns info found. dhcpc:error:71.714:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:81.716:udhcpc:628:No lease time with ACK, using 20 second lease httpd:error:82.275:rutNtwk_getActiveDnsIp:441:No active dns info found. httpd:error:82.275:rutNtwk_getActiveDnsIp:441:No active dns info found. dhcpc:error:91.718:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:101.719:udhcpc:628:No lease time with ACK, using 20 second lease [early_auth][557] logging from stb without permission checked! httpd:error:102.340:rutNtwk_getActiveDnsIp:441:No active dns info found. httpd:error:102.341:rutNtwk_getActiveDnsIp:441:No active dns info found. dhcpc:error:111.720:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:121.721:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:131.722:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:141.723:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:151.724:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:161.726:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:171.727:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:181.729:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:191.731:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:201.732:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:211.733:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:221.734:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:231.736:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:241.737:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:251.738:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:261.739:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:271.741:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:281.743:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:291.745:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:301.746:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:311.748:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:321.750:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:331.752:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:341.753:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:351.755:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:361.756:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:371.757:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:381.758:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:391.759:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:401.761:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:411.763:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:421.764:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:431.765:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:441.766:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:451.767:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:461.768:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:471.769:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:481.770:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:491.771:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:501.772:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:511.774:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:521.776:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:531.777:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:541.778:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:551.780:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:561.781:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:571.783:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:581.785:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:591.787:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:601.789:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:611.791:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:621.794:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:631.795:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:641.796:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:651.797:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:661.798:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:671.800:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:681.801:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:691.802:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:701.804:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:711.805:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:721.807:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:731.808:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:741.810:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:751.812:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:761.814:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:771.816:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:781.817:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:791.819:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:801.821:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:811.822:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:821.823:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:831.826:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:841.827:udhcpc:628:No lease time with ACK, using 20 second lease -&dhcp type 3 [1] -&dhcp clear original vendor info. [1] -& dhcp pading length = 67&&remain len = 1 [1] -& dhcp vendor class identifier append : GCableSSID dhcpc:error:851.840:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:861.841:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:871.843:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:881.844:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:891.845:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:901.847:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:911.848:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:921.849:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:931.850:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:941.851:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:951.856:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:961.857:udhcpc:628:No lease time with ACK, using 20 second lease [http_sock_connect][417]Illegal HostName! [cmcc_auth_main][1211]http_sock_connect failed! dhcpc:error:971.859:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:981.860:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:991.862:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:1.864:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:11.865:udhcpc:628:No lease time with ACK, using 20 second lease -&dhcp type 1 [1] -&dhcp clear original vendor info. [1] -& dhcp pading length = 56&&remain len = 1 [1] -& dhcp vendor class identifier append : GCableSSID -&dhcp type 3 [1] -&dhcp clear original vendor info. [1] -& dhcp pading length = 56&&remain len = 1 [1] -& dhcp vendor class identifier append : GCableSSID dhcpc:error:21.889:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:31.891:udhcpc:628:No lease time with ACK, using 20 second lease ssk:error:41.400:rutNtwk_getActiveDnsIp:441:No active dns info found. KLOB extended to 7 pools dhcpc:error:41.894:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:51.895:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:61.896:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:71.897:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:81.899:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:91.901:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:101.902:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:111.903:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:121.904:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:131.905:udhcpc:628:No lease time with ACK, using 20 second lease dhcpc:error:141.907:udhcpc:628:No lease time with ACK, using 20 second lease 复制代码
我的恩山、我的无线
The best wifi forum is right here.
补充，HC2600的拆机图可进入此查看
我的恩山、我的无线
The best wifi forum is right here.
你好兄弟能提供这机器的固件吗？我这是HI3716的
我的恩山、我的无线
The best wifi forum is right here.
兄弟能刷不，我刚刚换机顶盒也是hc2600看硬件应该是一样的！备份编程器固件分析cfe！期待能成功！
我的恩山、我的无线
The best wifi forum is right here.
我家也是用这个机顶盒，期待成功破解。
我的恩山、我的无线
The best wifi forum is right here.
Powered by