博客访问： 1036321
博文数量： 675
博客积分： 14610
博客等级： 上将
技术积分： 7420
注册时间：
IT168企业级官微
微信号：IT168qiye
系统架构师大会
微信号：SACC2013
WS-CISCO-2950-24
---—telnet 172.16.3.200
User Access Verification
Username: benet.cn &&
Password: benet.cn&&
swich-Server#s5 5
Trying s5 (1.1.1.1, 2005)... Open
5MODE5, ,switch:MODE
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950SX-24 starting...
Base ethernet MAC Address: 00:0d:28:9b:4d:80
Xmodem file system is available.
The system has been interrupted prior to initializing the
flash filesystem.& The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
&&& flash_init
&& &load_helper
switch: flash_init flash
Initializing Flash...
flashfs[0]: 10 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2679808
flashfs[0]: Bytes available: 5061632
flashfs[0]: flashfs fsck took 7 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
switch: dir flash: 5flash
Directory of flash:/
2&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& ?
3&&& drwx& 128&&&&&& &&&&&&&&&&&&&& lost+found
5&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& config.old
8&&& -rwx& 1004&&&&& &&&&&&&&&&&&&& vlan.dat
9&&& -rwx& 1472&&&&& &&&&&&&&&&&&&& up
7&&& -rwx& 2664051&& &&&&&&&&&&&&&& cl2-mz.121-11.EA1.bin
10&& -rwx& 1460&&&&& &&&&&&&&&&&&&& y
11&& -rwx& 1670&&&&& &&&&&&&&&&&&&& config.old2
12&& -rwx& 5&&&&&&&& &&&&&&&&&&&&&& private-config.text
5061632 bytes available (2679808 bytes used)
switch: del flash:private-config.text
Are you sure you want to delete "flash:private-config.text" (y/n)?y
File "flash:private-config.text" deleted
switch: dir flash: 5flash
Directory of flash:/
2&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& ?
3&&& drwx& 128&&&&&& &&&&&&&&&&&&&& lost+found
5&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& config.old
8&&& -rwx& 1004&&&&& &&&&&&&&&&&&&& vlan.dat
9&&& -rwx& 1472&&&&& &&&&&& &&&&&&&&up
7&&& -rwx& 2664051&& &&&&&&&&&&&&&& cl2-mz.121-11.EA1.bin
10&& -rwx& 1460&&&&& &&&&&&&&&&&&&& y
11&& -rwx& 1670&&&&& &&&&&&&&&&&&&& config.old2
5062144 bytes available (2679296 bytes used)
switch: boot reset
###############################################################################
File "flash:/cl2-mz.121-11.EA1.bin" uncompressed and installed, entry
executing...
&&&&&&&&&&&&& Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
&&&&&&&&&& cisco Systems, Inc.
&&&&&&&&&& 170 West Tasman Drive
&&&&&&&&&& San Jose, California
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (CL2-M), Version 12.1(11)EA1, RELEASE SOFTWARE
Copyright (c)
by cisco Systems, Inc.
Compiled Wed 28-Aug-02 10:25 by antonino
Image text-base: 0x, data-base: 0x
Initializing flashfs...
flashfs[1]: 9 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2679296
flashfs[1]: Bytes available: 5062144
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
cisco WS-C2950SX-24 (RC32300) processor (revision B0) with 20402K bytes of memo
Processor board ID FOC
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0D:28:9B:4D:80
Motherboard assembly number: 73-5781-12
Power supply part number: 34-0965-01
Motherboard serial number: 28-4641-05
Power supply serial number: PHI071407DY
Model revision number: B0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FOC
&&&&&&&& --- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
00:00:13: POST: Loop back Test Failed on GigabitEthernet0/1. State:Disabled
00:00:13: POST: Loop back Test Failed on GigabitEthernet0/2. State:Disabled
00:00:13: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:17: Gi0/1 can't be brought up because it failed POST in loopback test
00:00:17: Gi0/2 can't be brought up because it failed POST in loopback test
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C29
Switch>50-I6Q4L2-M), Version 12.1(11)EA1, RELEASE SOFTWARE (fc1)
Copyright (c)
by cisco Systems, Inc.
Compiled Wed 28-Aug-02 10:25 by antoninocpd_port_enable: port 24 xcvr_enable_li
cpd_port_enable: port 25 xcvr_enable_link: FALSE
00:00:19: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, c
anged state to down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, c
anged state to down
00:00:20: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively d
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, c
anged state to up
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, c
anged state to up
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state
Switch>enable
Switch#config &terimal
Enter configuration commands, one per line.& End with CNTL/Z.
Switch(config)#
/*****************************************************************************/
config.text
/*****************************************************************************/
---—telnet 172.16.3.200
User Access Verification
Username: benet.cn&&
Password: benet.cn&&
swich-Server#s5 5
Trying s5 (1.1.1.1, 2005)... Open
5MODE5, ,switch:MODE
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950SX-24 starting...
Base ethernet MAC Address: 00:0d:28:9b:4d:80
Xmodem file system is available.
The system has been interrupted prior to initializing the
flash filesystem.& The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
&&& flash_init
&&& load_helper
switch: flash_init flash
Initializing Flash...
flashfs[0]: 10 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 2679808
flashfs[0]: Bytes available: 5061632
flashfs[0]: flashfs fsck took 7 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
switch: dir flash: 5flash
Directory of flash:/
2&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& ?
3&&& drwx& 128&&&&&& &&&&&&&&&&&&&& lost+found
5&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& config.old
8&&& -rwx& 1004&&&&& &&&&&&&&&&&&&& vlan.dat
9&&& -rwx& 1472&&&&& &&&&&&&&&&&&&& up
7&&& -rwx& 2664051&& &&&&&&&&&&&&&& cl2-mz.121-11.EA1.bin
10&& -rwx& 1460&&&&& &&&&&&&&&&&&&& y
11&& -rwx& 1670&&&&& &&&&&&&&&&&&&& config.old2
12&& -rwx& 5&&&&&&&& &&&&&&&&&&&&&& private-config.text
5061632 bytes available (2679808 bytes used)
switch: rename flash:config.text flash:config.old &config.textconfig.old
switch: dir flash: 5flash
Directory of flash:/
2&&& -rwx& 1469&&&&& &&&&&&&&&&&&&& ?
3&&& drwx& 128&& &&&&&&&&&&&&&&&&&& lost+found
8&&& -rwx& 1004&&&&& &&&&&&&&&&&&&& vlan.dat
9&&& -rwx& 1472&&&&& &&&&&&&&&&&&&& up
7&&& -rwx& 2664051&& &&&&&&&&&&&&&& cl2-mz.121-11.EA1.bin
10&& -rwx& 1460&&&&& &&&&&&&&&&&&&& y
12&& -rwx& 1496&&&&& &&&&&&&&&&&&&& config.old
5063680 bytes available (2677760 bytes used)
switch: boot& 5(reset)
################################################################################
File "flash:/cl2-mz.121-11.EA1.bin" uncompressed and installed, entry p
executing...
&&&&&&&&&&&&& Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
&&&&&&&&&& cisco Systems, Inc.
&&&&&&&&&& 170 West Tasman Drive
&&&&&&&&&& San Jose, California
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (CL2-M), Version 12.1(11)EA1, RELEASE SOFTWARE
Copyright (c)
by cisco Systems, Inc.
Compiled Wed 28-Aug-02 10:25 by antonino
Image text-base: 0x, data-base: 0x
Initializing flashfs...
flashfs[1]: 9 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 2677760
flashfs[1]: Bytes available: 5063680
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
cisco WS-C2950SX-24 (RC32300) processor (revision B0) with 20402K bytes of memor
Processor board ID FOC
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0D:28:9B:4D:80
Motherboard assembly number: 73-5781-12
Power supply part number: 34-0965-01
Motherboard serial number: 28-4641-05
Power supply serial number: PHI071407DY
Model revision number: B0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FOC
&&&&&&&& --- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
00:00:13: POST: Loop back Test Failed on GigabitEthernet0/1. State:Disabled
00:00:13: POST: Loop back Test Failed on GigabitEthernet0/2. State:Disabled
00:00:13: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:17: Gi0/1 can't be brought up because it failed POST in loopback test
00:00:17: Gi0/2 can't be brought up because it failed POST in loopback test
00:00:17: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (CL2-M), Version 12.1(11)EA1, RELEASE SOFTWARE
Copyright (c)
by cisco Systems, Inc.
Compiled Wed 28-Aug-02 10:25 by antoninocpd_port_enable: port 24 xcvr_enable_lin
cpd_port_enable: port 25 xcvr_enable_link: FALSE
00:00:19: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, ch
anged state to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, ch
anged state to up
00:00:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t
% Please answer 'yes' or 'no'.
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
00:01:01: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively do
00:01:02: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t
Switch>enable&
Switch#dir flash:
Directory of flash:/
&&& 2& -rwx&&&&&&& 1469&& Mar 01 :29& ?
&&& 3& drwx&&&&&&&& 128&& Mar 01 :07& lost+found
&&& 8& -rwx&&& &&&&1004&& Mar 01 :00& vlan.dat
&&& 9& -rwx&&&&&&& 1472&& Mar 01 :51& up
&&& 7& -rwx&&&& 2664051&& Mar 01 :42& cl2-mz.121-11.EA1.bin
&& 10& -rwx&&&&&&& 1460&& Mar 01 :20& y
&& 12& -rwx&&&&&&& 1496&& Mar 01 :29& config.old
7741440 bytes total (5063680 bytes free)
Switch#rename flash:config.old flash:config.text
Destination filename [config.text]?
%Error renaming flash:config.old to flash:config.text (No such file or directory
Switch#dir flash:
Directory of flash:/
&&& 2& -rwx&&&&&&& 1469&& Mar 01 :29& ?
&&& 3& drwx&&&&&&&& 128&& Mar 01 :07& lost+found
&&& 8& -rwx&&&&&&& 1004&& Mar 01 :00& vlan.dat
&&& 9& -rwx&&&&&&& 1472&& Mar 01 :51& up
&&& 7& -rwx&&&& 2664051&& Mar 01 :42& cl2-mz.121-11.EA1.bin
&& 10& -rwx&&&&&&& 1460&& Mar 01 :20& y
&& 12& -rwx&&&&&&& 1496&& Mar 01 :29& config.text&
7741440 bytes total (5063680 bytes free)
Switch#copy running-config startup-config write
Destination filename [startup-config]?
Building configuration...
Switch#exit
Switch con0 is now available
Press RETURN to get started.
Switch>enable
阅读(1816) | 评论(0) | 转发(0) |
给主人留下些什么吧！~~
请登录后评论。IBM 刀片 BladeCenter H22 背板交换机链路聚合配置（bnt和nt）_服务器应用_Linux公社-Linux系统门户网站
你好，游客
IBM 刀片 BladeCenter H22 背板交换机链路聚合配置（bnt和nt）
来源：Linux社区&
作者：yujin2010good
刀片终于上架了，开始了网络配置，通过管理口登录管理刀箱，但开始配置，之前从来没有碰过刀片，居然以为插上电简单配置一下就可以通了，谁知道一个刀箱上居然有两个交换机需要配置，到ibm官方网站上去查，居然有3个牌子的手册，据说是找cisco、北电、博科三家厂商oem的，我都不知道看那个，全部下载下来研究吧。
最后发现这个应该是北电的，好像是博科把北电收购了，上面的标貌似博科。哈哈，看的差不多了就开始配置了（当然有高手在，我自己的话估计够呛）。
&&&&&& 由于项目需求，需要把带万兆光口的交换机（ibm 刀箱背板上的交换机）和博科 rx-16做爽端口绑定，就是我们常说的链路聚合（目的当然是冗余和加大带宽）。当然在配置中遇到了不少问题，2天之中从博科交换机到ibm交换机，再到ibm刀箱背板交换机。都是以前没用过的。
bnt用于计算网络
nt用于管理网
我们需要把背板上的bnt交换机的两个万兆口做聚合与博客交换机的连接，当然博客交换机上也是配置聚合，nt交换机就比较简单了，把tag标签去掉。纯2层模式就可以了。
一、配置前检查
bnt进入交换机
进交换机之前先检查交换机是否是干净的状态。info&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&进 入主菜单输入info，这里面是查看信息的地方首先检查port&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& 然后检查lacp&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& 动态聚合可以检查vlan如果有可以删除，之后才继续安装。
1、取消tag标签& cfg&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&进入配置模式port&& 1-14&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& （不能批量，只能一个一个的敲）&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& tag d&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&把tag改为untag模式（与cisco的trunk到access类似，但是cisco&默认为access口&）&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
applyinfoport
2、配置trunkcfg trunkena选择 1add ext1add ext2&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& 将口放入trunkapplydiff
nt交换机配置用步骤1就修改为纯2层模式了
下面为具体是配置：
&& Main# info------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# portAlias Port Tag Fast Lrn Fld PVID&&&&& NAME&&&&&&&&&&&&&&&&& VLAN(s)----- ---- --- ---- --- ---- -------------- -------------------------------INT1&&& 1&& y&& n&&& e&& e&&&& 1 INT1&&&&&&&&&& 1 4095 INT2&&& 2&& y&& n&&& e&& e&&&& 1 INT2&&&&&&&&&& 1 4095 INT3&&& 3&& y&& n&&& e&& e&&&& 1 INT3&&&&&&&&&& 1 4095 INT4&&& 4&& y&& n&&& e&& e&&&& 1 INT4&&&&&&&&&& 1 4095 INT5&&& 5&& y&& n&&& e&& e&&&& 1 INT5&&&&&&&&&& 1 4095 INT6&&& 6&& y&& n&&& e&& e&&&& 1 INT6&&&&&&&&&& 1 4095 INT7&&& 7&& y&& n&&& e&& e&&&& 1 INT7&&&&&&&&&& 1 4095 INT8&&& 8&& y&& n&&& e&& e&&&& 1 INT8&&&&&&&&&& 1 4095 INT9&&& 9&& y&& n&&& e&& e&&&& 1 INT9&&&&&&&&&& 1 4095 INT10& 10&& y&& n&&& e&& e&&&& 1 INT10&&&&&&&&& 1 4095 INT11& 11&& y&& n&&& e&& e&&&& 1 INT11&&&&&&&&& 1 4095 INT12& 12&& y&& n&&& e&& e&&&& 1 INT12&&&&&&&&& 1 4095 INT13& 13&& y&& n&&& e&& e&&&& 1 INT13&&&&&&&&& 1 4095 INT14& 14&& y&& n&&& e&& e&&&& 1 INT14&&&&&&&&& 1 4095 MGT1&& 15&& y&& n&&& e&& e& 4095*MGT1&&&&&&&&&& 4095 MGT2&& 16&& y&& n&&& e&& e& 4095*MGT2&&&&&&&&&& 4095 EXT1&& 17&& n&& n&&& e&& e&&&& 1 EXT1&&&&&&&&&& 1 EXT2&& 18&& n&& n&&& e&& e&&&& 1 EXT2&&&&&&&&&& 1 EXT3&& 19&& n&& n&&& e&& e&&&& 1 EXT3&&&&&&&&&& 1 EXT4&& 20&& n&& n&&& e&& e&&&& 1 EXT4&&&&&&&&&& 1 EXT5&& 21&& n&& n&&& e&& e&&&& 1 EXT5&&&&&&&&&& 1 EXT6&& 22&& n&& n&&& e&& e&&&& 1 EXT6&&&&&&&&&& 1 EXT7&& 23&& n&& n&&& e&& e&&&& 1 EXT7&&&&&&&&&& 1 EXT8&& 24&& n&& n&&& e&& e&&&& 1 EXT8&&&&&&&&&& 1 EXT9&& 25&& n&& n&&& e&& e&&&& 1 EXT9&&&&&&&&&& 1 * = PVID is tagged.
&& Information# ls------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# l2------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# lacp------------------------------------------------------------[LACP Menu]&&&& aggr&&&& - Show LACP aggregator information for the port&&&& port&&&& - Show LACP port information&&&& dump&&&& - Show all LACP ports information
&& LACP# dumpport& lacp&&&&& adminkey& operkey& selected&&&&&&&&& prio&&& attached& trunk&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& aggr&&&&&&&& ----------------------------------------------------------------------------INT1&& off&&&&&&&&&&&& 1&&&&&&& 1&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT2&& off&&&&&&&&&&&& 2&&&&&&& 2&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT3&& off&&&&&&&&&&&& 3&&&&&&& 3&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT4&& off&&&&&&&&&&&& 4&&&&&&& 4&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT5&& off&&&&&&&&&&&& 5&&&&&&& 5&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT6&& off&&&&&&&&&&&& 6&&&&&&& 6&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT7&& off&&&&&&&&&&&& 7&&&&&&& 7&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT8&& off&&&&&&&&&&&& 8&&&&&&& 8&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT9&& off&&&&&&&&&&&& 9&&&&&&& 9&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT10& off&&&&&&&&&&& 10&&&&&& 10&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT11& off&&&&&&&&&&& 11&&&&&& 11&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT12& off&&&&&&&&&&& 12&&&&&& 12&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT13& off&&&&&&&&&&& 13&&&&&& 13&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --INT14& off&&&&&&&&&&& 14&&&&&& 14&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT1&& off&&&&&&&&&&& 17&&&&&& 17&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT2&& off&&&&&&&&&&& 18&&&&&& 18&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT3&& off&&&&&&&&&&& 19&&&&&& 19&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT4&& off&&&&&&&&&&& 20&&&&&& 20&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT5&& off&&&&&&&&&&& 21&&&&&& 21&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT6&& off&&&&&&&&&&& 22&&&&&& 22&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT7&& off&&&&&&&&&&& 23&&&&&& 23&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT8&& off&&&&&&&&&&& 24&&&&&& 24&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --EXT9&& off&&&&&&&&&&& 25&&&&&& 25&&&&&&&& no&&&&&&&& 32768&&&&&&& --&&&& --
&& LACP# cd ..------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# ls------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# cd ..------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# l2------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# vlan VLAN&&&&&&&&&&&&&&& Name&&&&&&&&&&&&&&& Status&&&&&&&&&&& Ports----& --------------------------------& ------& -------------------------1&&&& Default VLAN&&&&&&&&&&&&&&&&&&&&& ena&&&& INT1-INT14 EXT1-EXT94095& Mgmt VLAN&&&&&&&&&&&&&&&&&&&&&&&& ena&&&& INT1-INT14 MGT1 MGT2
&& Layer 2# lacp------------------------------------------------------------[LACP Menu]&&&& aggr&&&& - Show LACP aggregator information for the port&&&& port&&&& - Show LACP port information&&&& dump&&&& - Show all LACP ports information
&& LACP# portUsage: port &port INT1-14, EXT1-9&
&& LACP# cd ..------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# cd /------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# cfg------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# portEnter port (INT1-14, MGT1-2, EXT1-9):&& 1 ------------------------------------------------------------[Port INT1 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT1# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT1 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT1# apply------------------------------------------------------------------A don't forget to "save" updated configuration.
&& Jan& 2& 8:47:54 170.120.116.224 INFO&&& mgmt: new configuration appliedPort INT1# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 2------------------------------------------------------------[Port INT2 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT2# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT2 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT2# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 3------------------------------------------------------------[Port INT3 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT3# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT3 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT3# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 4------------------------------------------------------------[Port INT4 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT4# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT4 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT4# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 5------------------------------------------------------------[Port INT5 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT5# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT5 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT5# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 6------------------------------------------------------------[Port INT6 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT6# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT6 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT6# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 7------------------------------------------------------------[Port INT7 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT7# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT7 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT7# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 8------------------------------------------------------------[Port INT8 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT8# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT8 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT8# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 9------------------------------------------------------------[Port INT9 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT9# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT9 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT9# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 10------------------------------------------------------------[Port INT10 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT10# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT10 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT10# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 11------------------------------------------------------------[Port INT11 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT11# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT11 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT11# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 12------------------------------------------------------------[Port INT12 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT12# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT12 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT12# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 13------------------------------------------------------------[Port INT13 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT13# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT13 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT13# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# port 14------------------------------------------------------------[Port INT14 Menu]&&&& gig&&&&& - Gig Phy Menu&&&& aclqos&& - Acl/Qos Configuration Menu&&&& 8021ppri - Set default 802.1p priority&&&& pvid&&&& - Set default port VLAN id&&&& name&&&& - Set port name&&&& dscpmrk& - Enable/disable DSCP remarking for port&&&& learn&&& - Enable/Disable FDB Learning for port&&&& tag&&&&& - Enable/disable VLAN tagging for port&&&& tagpvid& - Enable/disable tagging on pvid&&&& fastfwd& - Enable/disable Port Fast Forwarding mode&&&& floodblk - Enable/disable Port flood blocking&&&& ena&&&&& - Enable port&&&& dis&&&&& - Disable port&&&& cur&&&&& - Display current port configuration
&& Port INT14# tag dCurrent VLAN tag support: enabledNew VLAN tag support:&&&& disabledPort INT14 will be removed from all VLANs except its PVID.Confirm removing this port from all VLANs [y/n]: yTAG flag reset
&& Port INT14# apply------------------------------------------------------------------A don't forget to "save" updated configuration.
&& Jan& 2& 8:50:23 170.120.116.224 INFO&&& mgmt: new configuration appliedPort INT14# saveRequest will first copy the FLASH "active" config to "backup",&then overlay FLASH "active" with new config.Confirm saving to FLASH [y/n]: yNew config successfully saved to FLASH.Switch is currently set to use factory default config block on next boot.
Jan& 2& 8:50:39 170.120.116.224 INFO&&& mgmt: new configuration saved from AOSConfirm change that to the active config block [y/n]: yNext boot will use active config block.
&& Jan& 2& 8:50:47 170.120.116.224 NOTICE& mgmt: boot config block changedPort INT14# cd ..------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# cd ..------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# info------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# portAlias Port Tag Fast Lrn Fld PVID&&&&& NAME&&&&&&&&&&&&&&&&& VLAN(s)----- ---- --- ---- --- ---- -------------- -------------------------------INT1&&& 1&& n&& n&&& e&& e&&&& 1 INT1&&&&&&&&&& 1 INT2&&& 2&& n&& n&&& e&& e&&&& 1 INT2&&&&&&&&&& 1 INT3&&& 3&& n&& n&&& e&& e&&&& 1 INT3&&&&&&&&&& 1 INT4&&& 4&& n&& n&&& e&& e&&&& 1 INT4&&&&&&&&&& 1 INT5&&& 5&& n&& n&&& e&& e&&&& 1 INT5&&&&&&&&&& 1 INT6&&& 6&& n&& n&&& e&& e&&&& 1 INT6&&&&&&&&&& 1 INT7&&& 7&& n&& n&&& e&& e&&&& 1 INT7&&&&&&&&&& 1 INT8&&& 8&& n&& n&&& e&& e&&&& 1 INT8&&&&&&&&&& 1 INT9&&& 9&& n&& n&&& e&& e&&&& 1 INT9&&&&&&&&&& 1 INT10& 10&& n&& n&&& e&& e&&&& 1 INT10&&&&&&&&& 1 INT11& 11&& n&& n&&& e&& e&&&& 1 INT11&&&&&&&&& 1 INT12& 12&& n&& n&&& e&& e&&&& 1 INT12&&&&&&&&& 1 INT13& 13&& n&& n&&& e&& e&&&& 1 INT13&&&&&&&&& 1 INT14& 14&& n&& n&&& e&& e&&&& 1 INT14&&&&&&&&& 1 MGT1&& 15&& y&& n&&& e&& e& 4095*MGT1&&&&&&&&&& 4095 MGT2&& 16&& y&& n&&& e&& e& 4095*MGT2&&&&&&&&&& 4095 EXT1&& 17&& n&& n&&& e&& e&&&& 1 EXT1&&&&&&&&&& 1 EXT2&& 18&& n&& n&&& e&& e&&&& 1 EXT2&&&&&&&&&& 1 EXT3&& 19&& n&& n&&& e&& e&&&& 1 EXT3&&&&&&&&&& 1 EXT4&& 20&& n&& n&&& e&& e&&&& 1 EXT4&&&&&&&&&& 1 EXT5&& 21&& n&& n&&& e&& e&&&& 1 EXT5&&&&&&&&&& 1 EXT6&& 22&& n&& n&&& e&& e&&&& 1 EXT6&&&&&&&&&& 1 EXT7&& 23&& n&& n&&& e&& e&&&& 1 EXT7&&&&&&&&&& 1 EXT8&& 24&& n&& n&&& e&& e&&&& 1 EXT8&&&&&&&&&& 1 EXT9&& 25&& n&& n&&& e&& e&&&& 1 EXT9&&&&&&&&&& 1 * = PVID is tagged.
&& Information# cd /------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# Jan& 2& 8:56:08 170.120.116.224 ALERT&& stg: Port EXT2, putting port into blocking state
&& Main# cfg------------------------------------------------------------[Configuration Menu]&&&& sys&&&&& - System-wide Parameter Menu&&&& port&&&& - Port Menu&&&& pmirr&&& - Port Mirroring Menu&&&& l2&&&&&& - Layer 2 Menu&&&& l3&&&&&& - Layer 3 Menu&&&& qos&&&&& - QOS Menu&&&& acl&&&&& - Access Control List Menu&&&& setup&&& - Step by step configuration set up&&&& dump&&&& - Dump current configuration to script file&&&& ptcfg&&& - Backup current configuration to FTP/TFTP server&&&& gtcfg&&& - Restore current configuration from FTP/TFTP server&&&& cur&&&&& - Display current configuration
&& Configuration# l2------------------------------------------------------------[Layer 2 Menu]&&&& 8021x&&& - 802.1x Menu&&&& mrst&&&& - Multiple Spanning Tree/Rapid Spanning Tree Menu&&&& stg&&&&& - Spanning Tree Menu&&&& fdb&&&&& - FDB Menu&&&& trunk&&& - Trunk Group Menu&&&& thash&&& - IP Trunk Hash Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& failovr& - Failover Menu&&&& vlan&&&& - VLAN Menu&&&& pvstcomp - Enable/Disable PVST+ compatibility mode&&&& bpdugrd& - Enable/disable BPDU Guard&&&& macnotif - Enable/disable MAC address notification&&&& upfast&& - Enable/disable Uplink Fast&&&& update&& - UplinkFast station update rate&&&& cur&&&&& - Display current layer 2 parameters
&& Layer 2# trunk/Enter trunk group number: (1-16) 1------------------------------------------------------------[Trunk group 1 Menu]&&&& add&&&&& - Add port to trunk group&&&& rem&&&&& - Remove port from trunk group&&&& ena&&&&& - Enable trunk group&&&& dis&&&&& - Disable trunk group&&&& del&&&&& - Delete trunk group&&&& cur&&&&& - Display current Trunk Group configuration
&& Trunk group 1# add Enter port (INT1-EXT9): ext1Port EXT1 added.Reminder: Trunk 1 needs to be enabled.
&& Trunk group 1# add ext2Port EXT2 added.Reminder: Trunk 1 needs to be enabled.
&& Trunk group 1# apply------------------------------------------------------------------A don't forget to "save" updated configuration.
&& Jan& 2& 8:57:46 170.120.116.224 INFO&&& mgmt: new configuration appliedTrunk group 1# cd /------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# info------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# l2------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# dump------------------------------------------------------------------
upfast disabled, update 40
BPDU Guard disabled
Pvst+ compatibility mode enabled
------------------------------------------------------------------Spanning Tree Group 1: On (STP/PVST+)VLANs:& 1
Current Root:&&&&&&&&&&& Path-Cost& Port Hello MaxAge FwdDel&ffff 34:40:b5:60:c5:00&&&&&&& 2&&& EXT1&&& 2&&&& 20&&&& 15
Parameters:& Priority& Hello& MaxAge& FwdDel& Aging&&&&&&&&&&&&& 65535&&&&& 2&&&&& 20&&&&& 15&&&& 300
Port& Priority&& Cost&& FastFwd&& State&&&&&& Designated Bridge&&&& Des Port----& --------&& ----&& -------- ----------&& --------------------- --------INT1&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT2&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT3&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT4&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT5&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT6&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT7&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT8&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT9&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT10&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT11&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT12&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT13&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * INT14&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * EXT1&&&&&& 128&&&&& 2&&&&&& n&&& FORWARDING&&& ffff-34:40:b5:60:c5:00&&& 8012EXT2&&&&&& 128&&&&& 2&&&&&& n&&& BLOCKING&&&&& ffff-34:40:b5:6f:f4:00&&& 8011EXT3&&&&&& 128&&&&& 2&&&&&& n&&& DISABLED&&&&& EXT4&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& EXT5&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& EXT6&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& EXT7&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& EXT8&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& EXT9&&&&&& 128&&&&& 0!&&&&& n&&& DISABLED&&&&& * = STP turned off for this port.! = Automatic path cost.
------------------------------------------------------------------Spanning Tree Group 128: On (STP/PVST+)VLANs:& 4095
Current Root:&&&&&&&&&&& Path-Cost& Port Hello MaxAge FwdDel&ffff 34:40:b5:70:62:00&&&&&&& 0&&&&&&&&&&& 2&&&& 20&&&& 15
Parameters:& Priority& Hello& MaxAge& FwdDel& Aging&&&&&&&&&&&&& 65535&&&&& 2&&&&& 20&&&&& 15&&&& 300
Port& Priority&& Cost&& FastFwd&& State&&&&&& Designated Bridge&&&& Des Port----& --------&& ----&& -------- ----------&& --------------------- --------MGT1&&&&&&&& 0&&&&& 0&&&&&& n&&& FORWARDING& * MGT2&&&&&&&& 0&&&&& 0&&&&&& n&&& DISABLED&&& * * = STP turned off for this port.
VLAN&&&&&&&&&&&&&&& Name&&&&&&&&&&&&&&& Status&&&&&&&&&&& Ports----& --------------------------------& ------& -------------------------1&&&& Default VLAN&&&&&&&&&&&&&&&&&&&&& ena&&&& INT1-INT14 EXT1-EXT94095& Mgmt VLAN&&&&&&&&&&&&&&&&&&&&&&&& ena&&&& MGT1 MGT2
Trunk group 1: DisabledReminder: Trunk group 1 needs to be enabled.Protocol - Staticport state:&EXT1: STG& 1 forwarding&EXT2: STG& 1 BLOCKING
Current priority to COS queue information:Priority& COSq& Weight--------& ----& ------&&& 0&&&&&& 0&&&&& 1&&& 1&&&&&& 0&&&&& 1&&& 2&&&&&& 0&&&&& 1&&& 3&&&&&& 0&&&&& 1&&& 4&&&&&& 1&&&&& 2&&& 5&&&&&& 1&&&&& 2&&& 6&&&&&& 1&&&&& 2&&& 7&&&&&& 1&&&&& 2
Current port priority information:Port&& Priority& COSq& Weight-----& --------& ----& ------INT1&&&&&&& 0&&&&&& 0&&&&& 1INT2&&&&&&& 0&&&&&& 0&&&&& 1INT3&&&&&&& 0&&&&&& 0&&&&& 1INT4&&&&&&& 0&&&&&& 0&&&&& 1INT5&&&&&&& 0&&&&&& 0&&&&& 1INT6&&&&&&& 0&&&&&& 0&&&&& 1INT7&&&&&&& 0&&&&&& 0&&&&& 1INT8&&&&&&& 0&&&&&& 0&&&&& 1INT9&&&&&&& 0&&&&&& 0&&&&& 1INT10&&&&&& 0&&&&&& 0&&&&& 1INT11&&&&&& 0&&&&&& 0&&&&& 1INT12&&&&&& 0&&&&&& 0&&&&& 1&&&&&&&&&&&&& INT13&&&&&& 0&&&&&& 0&&&&& 1INT14&&&&&& 0&&&&&& 0&&&&& 1MGT1&&&&&&& 0&&&&&& 0&&&&& 1MGT2&&&&&&& 0&&&&&& 0&&&&& 1EXT1&&&&&&& 0&&&&&& 0&&&&& 1EXT2&&&&&&& 0&&&&&& 0&&&&& 1EXT3&&&&&&& 0&&&&&& 0&&&&& 1EXT4&&&&&&& 0&&&&&& 0&&&&& 1EXT5&&&&&&& 0&&&&&& 0&&&&& 1EXT6&&&&&&& 0&&&&&& 0&&&&& 1EXT7&&&&&&& 0&&&&&& 0&&&&& 1EXT8&&&&&&& 0&&&&&& 0&&&&& 1EXT9&&&&&&& 0&&&&&& 0&&&&& 1
Forwarding database information:&&&& MAC address&&&& VLAN& Port& Trnk& State& Permanent& & -----------------& ----& ----& ----& -----& ---------& & 00:25:90:61:17:0f&&&& 1& EXT1&&&&&&&& FWD&&&&&&&&&&&&&& & 00:25:90:61:c8:75&&&& 1& EXT1&&&&&&&& FWD&&&&&&&&&&&&&& & 00:25:90:61:ca:85&&&& 1& EXT1&&&&&&&& FWD&&&&&&&&&&&&&& & 34:40:b5:60:c5:00&&&& 1& EXT1&&&&&&&& FWD&&&&&&&&&&&&&& & 34:40:b5:64:85:00&&&& 1& EXT1&&&&&&&& FWD&&&&&&&&&&&&&& & 5c:f3:fc:ef:5b:c7& 4095& MGT1&&&&&&&& FWD&&&&&&&&&&&&&&
802.1x Operational Info:------------------------------------------------------------------System capability : AuthenticatorSystem status&&&& : disabledProtocol version& : 1Guest VLAN status : disabledGuest VLAN&&&&&&& : none&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Authenticator&&& BackendPort&&& Auth Mode&&& Auth Status&&&& PAE State&&&& Auth State-----& ------------& ------------& --------------& ----------&INT1& force-auth&&& unauthorized& initialize&&&&& initialize&INT2& force-auth&&& unauthorized& initialize&&&&& initialize&INT3& force-auth&&& unauthorized& initialize&&&&& initialize&INT4& force-auth&&& unauthorized& initialize&&&&& initialize&INT5& force-auth&&& unauthorized& initialize&&&&& initialize&INT6& force-auth&&& unauthorized& initialize&&&&& initialize&INT7& force-auth&&& unauthorized& initialize&&&&& initialize&INT8& force-auth&&& unauthorized& initialize&&&&& initialize&INT9& force-auth&&& unauthorized& initialize&&&&& initialize&INT10 force-auth&&& unauthorized& initialize&&&&& initialize&INT11 force-auth&&& unauthorized& initialize&&&&& initialize&INT12 force-auth&&& unauthorized& initialize&&&&& initialize&INT13 force-auth&&& unauthorized& initialize&&&&& initialize&INT14 force-auth&&& unauthorized& initialize&&&&& initialize&EXT1& force-auth&&& unauthorized& initialize&&&&& initialize&EXT2& force-auth&&& unauthorized& initialize&&&&& initialize*EXT3& force-auth&&& unauthorized& initialize&&&&& initialize*EXT4& force-auth&&& unauthorized& initialize&&&&& initialize*EXT5& force-auth&&& unauthorized& initialize&&&&& initialize*EXT6& force-auth&&& unauthorized& initialize&&&&& initialize*EXT7& force-auth&&& unauthorized& initialize&&&&& initialize*EXT8& force-auth&&& unauthorized& initialize&&&&& initialize*EXT9& force-auth&&& unauthorized& initialize&&&&& initialize------------------------------------------------------------------* - Port down or disabled
STP uplink fast mode : disabled
&& Layer 2#&&& cd ..------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# l2------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# trunkTrunk group 1: DisabledReminder: Trunk group 1 needs to be enabled.Protocol - Staticport state:&EXT1: STG& 1 forwarding&EXT2: STG& 1 BLOCKING
&& Layer 2# trunkTrunk group 1: DisabledReminder: Trunk group 1 needs to be enabled.Protocol - Staticport state:&EXT1: STG& 1 forwarding&EXT2: STG& 1 BLOCKING
&& Layer 2# cd ..------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# l2------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# trunkTrunk group 1: DisabledReminder: Trunk group 1 needs to be enabled.Protocol - Staticport state:&EXT1: STG& 1 forwarding&EXT2: STG& 1 BLOCKING
&& Layer 2# cd ..------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information#
&& Information#
&& Information#
&& Information# l2& ------------------------------------------------------------[Layer 2 Menu]&&&& fdb&&&&& - Forwarding Database Information Menu&&&& lacp&&&& - Link Aggregation Control Protocol Menu&&&& 8021x&&& - Show 802.1x information&&&& stg&&&&& - Show STP information&&&& cist&&&& - Show CIST information&&&& trunk&&& - Show Trunk Group information&&&& vlan&&&& - Show VLAN information&&&& dump&&&& - Dump all layer 2 information
&& Layer 2# trunkTrunk group 1: DisabledReminder: Trunk group 1 needs to be enabled.Protocol - Staticport state:&EXT1: STG& 1 forwarding&EXT2: STG& 1 BLOCKING
&& Layer 2# cd /------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# info------------------------------------------------------------[Information Menu]&&&& sys&&&&& - System Information Menu&&&& l2&&&&&& - Layer 2 Information Menu&&&& l3&&&&&& - Layer 3 Information Menu&&&& qos&&&&& - QoS Menu&&&& acl&&&&& - Show ACL information&&&& link&&&& - Show link status&&&& port&&&& - Show port information&&&& transcvr - Show Port Transceiver status&&&& dump&&&& - Dump all information
&& Information# portAlias Port Tag Fast Lrn Fld PVID&&&&& NAME&&&&&&&&&&&&&&&&& VLAN(s)----- ---- --- ---- --- ---- -------------- -------------------------------INT1&&& 1&& n&& n&&& e&& e&&&& 1 INT1&&&&&&&&&& 1 INT2&&& 2&& n&& n&&& e&& e&&&& 1 INT2&&&&&&&&&& 1 INT3&&& 3&& n&& n&&& e&& e&&&& 1 INT3&&&&&&&&&& 1 INT4&&& 4&& n&& n&&& e&& e&&&& 1 INT4&&&&&&&&&& 1 INT5&&& 5&& n&& n&&& e&& e&&&& 1 INT5&&&&&&&&&& 1 INT6&&& 6&& n&& n&&& e&& e&&&& 1 INT6&&&&&&&&&& 1 INT7&&& 7&& n&& n&&& e&& e&&&& 1 INT7&&&&&&&&&& 1 INT8&&& 8&& n&& n&&& e&& e&&&& 1 INT8&&&&&&&&&& 1 INT9&&& 9&& n&& n&&& e&& e&&&& 1 INT9&&&&&&&&&& 1 INT10& 10&& n&& n&&& e&& e&&&& 1 INT10&&&&&&&&& 1 INT11& 11&& n&& n&&& e&& e&&&& 1 INT11&&&&&&&&& 1 INT12& 12&& n&& n&&& e&& e&&&& 1 INT12&&&&&&&&& 1 INT13& 13&& n&& n&&& e&& e&&&& 1 INT13&&&&&&&&& 1 INT14& 14&& n&& n&&& e&& e&&&& 1 INT14&&&&&&&&& 1 MGT1&& 15&& y&& n&&& e&& e& 4095*MGT1&&&&&&&&&& 4095 MGT2&& 16&& y&& n&&& e&& e& 4095*MGT2&&&&&&&&&& 4095 EXT1&& 17&& n&& n&&& e&& e&&&& 1 EXT1&&&&&&&&&& 1 EXT2&& 18&& n&& n&&& e&& e&&&& 1 EXT2&&&&&&&&&& 1 EXT3&& 19&& n&& n&&& e&& e&&&& 1 EXT3&&&&&&&&&& 1 EXT4&& 20&& n&& n&&& e&& e&&&& 1 EXT4&&&&&&&&&& 1 EXT5&& 21&& n&& n&&& e&& e&&&& 1 EXT5&&&&&&&&&& 1 EXT6&& 22&& n&& n&&& e&& e&&&& 1 EXT6&&&&&&&&&& 1 EXT7&& 23&& n&& n&&& e&& e&&&& 1 EXT7&&&&&&&&&& 1 EXT8&& 24&& n&& n&&& e&& e&&&& 1 EXT8&&&&&&&&&& 1 EXT9&& 25&& n&& n&&& e&& e&&&& 1 EXT9&&&&&&&&&& 1 * = PVID is tagged.
&& Information# cd /------------------------------------------------------------[Main Menu]&&&& info&&&& - Information Menu&&&& stats&&& - Statistics Menu&&&& cfg&&&&& - Configuration Menu&&&& oper&&&& - Operations Command Menu&&&& boot&&&& - Boot Options Menu&&&& maint&&& - Maintenance Menu&&&& diff&&&& - Show pending config changes& [global command]&&&& apply&&& - Apply pending config changes [global command]&&&& save&&&& - Save updated config to FLASH [global command]&&&& revert&& - Revert pending or applied changes [global command]&&&& exit&&&& - Exit& [global command, always available]
&& Main# info------------------------------------------------------------[Information Menu]&&&& sys&&&&& - Sys