国外主要无损检测标准 BM(E)O (电磁检测标准)
国外主要无损检测标准(电磁检测标准)
(注:题录后括号内注解意义同国内标准,INDT为&国外无损检测&杂志)
在磁性基体上的非磁性复盖层--复盖层厚度测量--磁测法
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness-Magnetic method
在非磁性金属基体上的非导电复盖层--复盖层厚度测量--涡流法
Non-conductive coatings on non-magnetic electrically conductive basis materials-Measurement of coating thickness- Amplitude-sensitive eddy current method
ISO 2361-82E
磁性和非磁性基体上镀镍层厚度的磁性测量方法(NDT,87-2)
在磁性和非磁性基体上的电镀层--镀层厚度测量--磁测法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates-Measurement of
coating thickness -- Magnetic method
铸钢件的磁粉探伤
渗透检验和磁粉检验 观察条件 黑光源的间接评定方法（TC135）
起重机械用钢丝绳检验和报废实用规范
ISO5065/ 1
磁粉检验指示器-第1部分:特性
ISO5065/ 2
磁粉检验指示器-第2部分:试验
ISO DP 5578
磁粉检验用磁化设备
钢铸件-磁粉检验
Steel castings-Magnetic particle inspection
铁道轧材--磁粉验收试验
Railway rolling stock material -- Magnetic particle acceptance testing
无缝和焊接( 埋弧焊除外)
承压钢管--验证液压密封性的电磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Electromagnetic testing for verification of hydraulic leak-tightness
无缝和焊接( 埋弧焊除外)
承压钢管--探测缺陷的涡流检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Eddy current testing for the detection of imperfections
无缝和焊接( 埋弧焊除外)
承压钢管--探测铁磁性钢管纵向缺陷的全圆周磁传感器/ 漏磁检验
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes-Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for
the detection of longitudinal imperfections
受压无缝钢管
探测铁磁性钢管横向缺陷的全圆周磁传感器/ 漏磁检验
Seamless steel tubes for pressure purposes-Full peripheral magnetic transducer/flux
leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
无损检测--磁粉检测--第1部分:总则
（GB/T 5 IDT）
Non-destructive testing-Magnetic particle testing-Part 1: General principles
无损检测--磁粉检测--第2部分:检测介质
（GB/T 5 IDT）
Non-destructive testing-Magnetic particle testing-Part 2: Detection media
无损检测--磁粉检测--第3部分:设备
（GB/T 5 IDT）
Non-destructive testing-Magnetic particle testing-Part 3: Equipment
无损检测--磁粉检测--词汇
Non-destructive
testing-Magnetic particle testing-Vocabulary
无损检测--涡流检测--词汇
Non-destructive testing --
Eddy current testing --Vocabulary
无缝和焊制承压钢管
管端分层缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magnetic particle inspection of
the tube ends for the detection of laminar imperfections
无缝和焊制承压钢管
管体表面缺陷的磁粉检测
Seamless and welded steel tubes for pressure purposes-Magnetic particle inspection of
the tube body for the detection of surface imperfections
无损检测--涡流检验设备--第1部分：仪器特性与
Non-destructive testing --
Equipment for eddy current examination -- Part 1: Instrument characteristics
and verification
无损检测--涡流检验设备--第2部分：探头特性与
Non-destructive testing --
Equipment for eddy current examination -- Part 2: Probe characteristics and
verification
无损检测--涡流检验设备--第3部分：系统特性与
验证（GB/T 8 IDT）
Non-destructive testing --
Equipment for eddy current examination -- Part 3: System characteristics and
verification
无损检测--涡流检验--总则
Non-destructive testing --
Eddy current testing --General principles
焊缝无损检测--磁粉检测
Non-destructive testing of welds-Magnetic particle testing
焊缝无损检测--利用复平面分析的涡流检测
Non-destructive testing of welds-Eddy current testing of welds by complex-plane
无损检测-铁磁性金属构件的脉冲涡流检测
焊缝无损检测--焊缝的磁粉检测--验收等级
ISO 24497-1
无损检测--金属磁存储器-第1部分:一般要求
ISO 24497-2
无损检测--金属磁存储器-第2部分:术语与定义
ISO 24497-3
无损检测--金属磁存储器-第3部分:焊缝的检验
ISO 25902-1
钛管无损检测--第1部分:涡流检验
欧洲标准化委员会标准：
焊缝无损检测
焊缝的磁粉检验
Non-destructive
examination of welds-Magnetic particle examination of welds
焊缝无损检测
焊缝的磁粉检验 验收等级
Non-destructive
examination of welds-Magnetic particle testing of welds-Acceptance levels
无损检测 术语 第5部分：涡流检测所用术语
Non-destructive
testing-Terminology-Part 5:Terms used in Eddy current testing
无损检测 术语 第7部分：磁粉检测所用术语
Non-destructive testing - Terminology - Part 7:
Terms used in magnetic particle testing
铸件磁粉检查
焊缝无损检测
基于复平面分析的焊缝涡流检测
Non-destructive
examination of welds-Eddy current examination of welds by complex plane
渗透检测和磁粉检测
铜和铜合金的涡流检测
EN 2857/1:
EN 2857/2:
无损检测 渗透检测和磁粉检测 观察条件
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions(ISO )
EN ISO 1/A1:2003
无损检测 磁粉检测 第1部分：总则
Non-destructive testing-Magnetic particle
testing-Part 1:General principles(ISO 3)
无损检测 磁粉检测 第2部分：探测介质
Non-destructive testing-Magnetic particle
testing-Part 2:Detection media(ISO 2)
无损检测 磁粉检测 第3部分：设备
Non-destructive testing-Magnetic particle
testing-Part 3:Equipment(ISO 2)
无缝与焊接（埋弧焊除外）铁磁性钢管的自动电磁检测-验证液压密封性
无缝与焊接（埋弧焊除外）奥氏体和奥氏体铁素体钢管的自动涡流检测-验证液压密封性
无缝与焊接（埋弧焊除外）钢管的自动涡流检测-探伤
无缝铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测横向缺陷
无缝与焊接（埋弧焊除外）铁磁性钢管的自动全圆周磁传感器/漏磁检测-检测纵向缺陷
无缝与焊接铁磁性钢管的磁粉检测-检测表面缺陷
无缝与焊接铁磁性钢管管端面的磁粉检测-检测层状缺陷
EN /A1:2003
涡流检测 一般原理和指南
Non-destructive testing-Eddy current
testing-General principles and
guidelines
无损检测 涡流检测 词汇
Non-destructive testing - Eddy current testing
- Vocabulary (ISO )
涡流检测 设备性能与验证 第1部分：仪器性能与验证
Non-destructive testing-Eddy current
examination-Equipment characteristics and verification-Part 1:Instrument
characteristics and verification
涡流检测 设备性能与验证 第2部分：探头性能与验证
Non-destructive testing-Eddy current
examination-Equipment characteristics and verification-Part 2:Probe
characteristics and verification
涡流检测 设备性能与验证 第3部分：系统性能与验证
Non-destructive testing-Eddy current
examination-Equipment characteristics and verification-Part 3:System
characteristics and verification
无损检测 涡流检验设备
第1部分：仪器特性与验证
Non-destructive testing - Equipment for eddy
current examination - Part 1:Instrument characteristics and verification
EN ISO 8/AC:2010
无损检测 涡流检验设备
第1部分：仪器特性与验证 技术勘误表
Non-destructive testing - Equipment for eddy
current examination - Part 1:Instrument characteristics and verification -
Technical Corrigendum 1 (ISO 8/Cor 1:2010)
无损检测 涡流检验设备
第2部分：探头特性与验证
Non-destructive testing - Equipment for eddy
current examination - Part 2:Probe characteristics and verification (ISO
无损检测 涡流检验设备
第3部分：系统特性与验证
Non-destructive testing - Equipment for eddy
current examination - Part 3:System characteristics and verification (ISO
无损检测 涡流检测 总则
Non-destructive testing - Eddy current testing
- General principles (ISO )
EN WI 45:2002
涡流检测设备
永久磁铁试验方法
Methods of test for permanent magnet
铁磁性材料磁粉检验方法及磁粉显示等级
(INDT,84-2 1982年版)
METHOD FOR MAGNETIC PARTICLE TESTING OF FERROMAGNETIC MATERIALS AND CLASSIFICATION OF MAGNETIC PARTICLE INDICATION
钢制产品的环绕线圈法涡流检测
Method for eddy current testing of steel products by encircling coil technique
钢管的涡流检验方法
Eddy current examination of steel pipes and tubes
铜及铜合金管的涡流检测方法
METHOD OF EDDY CURRENT TESTING FOR COPPER AND COPPER ALLOY PIPES AND TUBES
有色金属材料的电阻率及导电率测定方法
Measuring methods for electrical resistivity and conductivity of non-ferrous materials
钛管的涡流检验
Eddy current inspection of titanium pipes and tubes
JIS H 0601:62
锗的电阻率测定方法
JIS H 0602:95
硅单晶及硅薄片的四探针法电阻率测定方法
涡流试验仪器性能特性试验方法
Test methods for performance characteristics of eddy current testing instruments
涡流探伤系统性能特性试验方法
TEST METHODS FOR PERFORMANCE CHARACTERISTICS OF EDDY CURRENT FLAW DETECTING SYSTEM
漏磁试验方法
Methods for magnetic leakage flux testing
用于磁粉检测的交流磁轭
AC YOKE MAGNET FOR MAGNETIC PARTICLE TESTING
磁粉和渗透检验中目视校验计较准方法的确认
Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing&
无损检测 渗透检测 第3部分：参考试块
Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
量值和单位 第5部分:电学和磁学
Quantities and units - Part 5: Electricity and magnetism
宇航用涡流法对铝合金热处理测量的电导试验
Electrical conductivity test for measurement of heat treatment of aluminum alloys, eddy current method, for aerospace use
JIS W 4031-82
宇航用磁粉检验方法
INSPECTION PROCESS OF MAGNETIC PARTICLE FOR AEROSPACE USE
NDIS 3101-84
涡流探伤装置单项性能的测试及其表示方法
NDIS 3102-84
涡流探伤装置综合性能的测试及其表示方法
NDIS 3301-77
磁粉探伤用C1型标准试片
NDIS 3404-82
漏磁探伤测试方法(INDT,85-3)
NDIS 3105-83
交流磁轭磁粉检验装置性能与试验方法
NDIS 3403-81
表面缺陷检测方法
永磁材料的检测
测定磁轭的退磁曲线和永磁导磁率 感应法
Testing of perman Determination of the demagnetization curve and permanent pe Inductive method
永久磁铁的检测 在工作范围内测定磁通量值
determination of the magnetic flux values in the working range
用探针式差动测量器测量涂层厚度
Measurement of coating thickness by differential measurement using a stylus instrument
DIN 50981-79
用磁粉法测量铁素体材料非铁磁性层的厚度
DIN 50984-78
用涡流法测量非铁素体母材的非导电层厚度
DIN 50985-77
用电容法测量导电母材上非导电层的厚度
DIN 54121-65
磁粉探伤定义及检验证明
无损检测 漏磁检测 通则
Non- magnetic leakage flux testing, general
除携带式以外的固定式与移动式磁粉检验设备性能及测定方法
携带式磁粉检验设备性能及测定方法
DIN 54132-80
磁粉检验介质的性能测定
带扫描探头的漏磁检测 原理
Non- magnetic leakage flux testing by
principles
无损检测 电磁法
测试线圈组件的图像和一般特性
Non- ele representation and general characteristics of test coil assemblies
电磁(涡流)法检测的一般规则
电磁检测名词术语
管子的涡流检测
用同心试验线圈和单频率法检测的一般注意事项
Non- Eddy current testin General remarks on testing using concentric test coils and the single-frequency method
管子的涡流检测
同心试验线圈的涡流检测系统性能测定与校验的参考方法
Non- Eddy current testin Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
管子的涡流检测 方法
Non- eddy current testin procedure
穿过式线圈单频法管材涡流检测(NDT,86-1)
穿过式线圈涡流检验装置性能的测定方法
涡流检测的实施
核技术设备定期磁粉检验
DIN V VDE V -1995
电磁场中的安全性 在0至30KHz频率范围的人员防护
Safety in electromagnetic fields - Protection of persons in the frequency range from 0 to 30 kHz; Amendment A3
焊缝的无损检测
焊缝的磁粉检测
Non-destructive testing of welds - Magnetic parti German version EN
焊缝的无损检测
焊缝的磁粉检测 验收等级
Non-destructive testing of welds - Magnetic particle testing of welds - A German version EN
无损检测术语 第5部分:涡流检测
Non-destructive testing - Terminology - Part 5: Terms used in Eddy C trilingual version EN 8
铸造 磁粉检验 Founding - Magnetic German version EN
铜和铜合金
管子的涡流检测
Copper and copper alloys - Eddy cu German version EN
焊缝的无损检验
焊缝的复平面分析涡流检验
Non-destructive examination of welds - Eddy current examination of welds by co German version EN
钢锻件的无损检测 第1部分:磁粉检验
Non-destructive testing of steel forgings - Part 1: Magnetic German version EN 9
钢管的无损检测 第1部分:验证无缝和焊接铁磁钢管(埋弧焊除外)水压密封性的自动电磁检测
Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak- German version EN 6
钢管的无损检测 第3部分:探测无缝和焊接钢管(埋弧焊接除外)不完整性的自动涡流检测Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detect German version EN 9
钢管的无损检测 第4部分:探测铁磁无缝钢管横向不完整性的自动全圆周磁探头/磁漏检测
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of tran German version EN 9
钢管的无损检测 第5部分:探测无缝和焊接(埋弧焊接除外)铁磁钢管纵向不完整性的自动全圆周磁探头/磁漏检测
Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longit German version EN 9
钢管的无损检测 第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of l German version EN 0
无损检测 涡流检测 一般原理和基本指南
Non-destructive testing - Eddy current testing - General principles
German version EN
无损检测 涡流检验
设备特性和验证 第1部分:仪器特性和验证
Non-destructive testing - Eddy Equipment characteristics and verification - Part 1: Instrument characterist German version EN 3
无损检测 涡流检验
设备特性和验证 第2部分:探头特性和验证
Non-destructive testing - Eddy Equipment characteristics and verification - Part 2: Probe characterist German version EN 3
DIN EN ISO
磁性基体上的非磁性涂镀层
涂镀层厚度测量 磁性法
Non-magnetic coatings on magnetic substrates -
Measurement of coating thickness - Magnetic method (ISO ); German version EN ISO
DIN EN ISO
非磁性基体金属上的非导体涂层
涂层厚度测量 涡流法
Non-conductive coatings on non-magnetic basis metals -
Measurement of coating thickness - Eddy current method (ISO ); German version EN ISO
DIN EN ISO
磁性和非磁性基体上的镍电镀层
镀层厚度测量 磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO ); German version EN ISO
DIN EN ISO 2
无损检测 磁粉检测 第1部分:一般原理
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 1); German version EN ISO 1
DIN EN ISO 3
无损检测 磁粉检测 第2部分:探测介质
Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 2); German version EN ISO 2
DIN EN ISO 2
无损检测 磁粉检测 第3部分:设备
Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 2); German version EN ISO 2
混凝土试验-电磁式保护层厚度计应用的推荐方法
利用线圈全部长、宽的电磁方法
无损检测术语 磁粉探伤
Glossary of terms used in non-destructive testing - Magnetic particle flaw detection
BS 3683 Pt.5-83
涡流检测名词术语
BS 3889 Pt.2A-86(1991)
管道和管子无损检测方法
锻钢管的涡流检测
BS 3889 Pt.2B-82
管道和管子无损检测方法 有色金属管的涡流检测
BS 4069-82
磁粉探伤用磁粉及磁悬液(INDT,84-2)
BS 4080/1:
用磁粉探伤显示表面缺陷
BS 4397-69
焊缝的磁粉检测方法(WSTS,85-4)
BS 4408 Pt.1-69
混凝土复盖层的电磁测量方法
无损检测中评定黑光的方法
磁粉探伤用反差增强涂料
精加工整体锻造及落锤锻曲轴的磁粉检验
BS 5411 Pt.3-84
非磁性基体上非导电复盖层厚度的涡流检测
BS 5411 Pt.9-84
非磁性基体上镀镍层厚度的磁性检测方法
BS 5411 Pt.11-84
磁性基体上非磁性复盖层厚度的磁性测量方法
缺陷的磁粉检验方法(81年版在INDT
磁性材料 永磁(硬磁)材料
磁性能测量方法
Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
BS DD ENV 5
人体电磁场照射 低频(0 Hz 至 10 kHz)
Human exposure to electromagnetic fields - Low frequency (0 Hz to 10 kHz)
BS DD ENV 5
人体电磁场照射 高频(10 kHz
至 300 GHz)
Human exposure to electromagnetic fields - High frequency (10 kHz to 300 GHz)
材料及工件的磁粉检验
焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds - Magnetic particle examination of welds
焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels
无损检测术语-涡流检测
Non-destructive testing - Terminology - Terms used in eddy current testing
铸造-磁粉检验
Founding - Magnetic particle inspection
锻钢件无损检测-磁粉检验
Non-destructive testing of steel forgings - Magnetic particle inspection
钢管的无损检测-铁磁性无缝与焊接（埋弧焊除外）钢管验证水压试验的自动电磁检测
Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
钢管的无损检测-奥氏体与奥氏体-铁素体无缝与焊接（埋弧焊除外）钢管验证水压试验的自动涡流检测
钢管的无损检测-探测无缝与焊接（埋弧焊除外）钢管不完整性的自动涡流检测
Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
钢管的无损检测-铁磁性无缝钢管横向不完整性自动全圆周磁探头/漏磁检测
Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
钢管的无损检测-铁磁性无缝与焊接（埋弧焊除外）钢管纵向不完整性自动全圆周磁探头/漏磁检测
Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
钢管的无损检测
探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
钢管的无损检测
探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验
Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
无损检测-涡流检测-一般原理与指南
Non-destructive testing - Eddy current testing - General principles and guidelines
磁性基体上非磁性涂层的厚度测量-磁性法
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
非磁性金属基体上非导电涂层的厚度测量-涡流法
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method
磁性和非磁性基体上镍镀层的厚度测量-磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
BS EN ISO 1
无损检测 磁粉检测
一般原理 Non-destructive testing - Magnetic particle testing - General principles
BS EN ISO 2
无损检测 磁粉检测
Non-destructive testing - Magnetic particle testing - Detection media
BS EN ISO 2
无损检测 磁粉检测 设备
Non-destructive testing - Magnetic particle testing - Equipment
NF A04-101-64
冶金产品磁粉检测(磁悬液检测)
NF A04-121-74
钢制长条形制品表面缺陷的磁粉检验
NF A04-193-1997
铸造 磁粉检验
Founding - Magnetic particle inspection.
NF A05-115-1999
铜及铜合金
管子的涡流检测
Copper and copper alloys. Eddy current test for tubes.
NF A09-020-5-1998
无损检测术语 第5部分:涡流检测
Non-destructive testing. Terminology. Part 5 : terms used in Eddy Current testing.
NF A09-125-82
冶金制件磁粉探伤的一般原理
NF A09-160-2001
无损检测 涡流检测 一般原理和指南
Non-destructive testing - Eddy current testing - General principles and guidelines.
NF A09-590-1-2002
无损检测 磁粉检测 第1部分:一般原理
Non-destructive testing - Magnetic particle testing - Part 1 : general principle.
NF A09-590-3-2002
无损检测 磁粉检测 第3部分：设备
Non-destructive testing - Magnetic particle testing - Part 3 : equipment.
NF A49-871-81
铁磁性钢管纵向缺陷的探头检漏法检测
NF A49-872-83
穿过式线圈法的钢管涡流探伤
NF A49-875-1-1996
钢管的无损检测 第1部分:无缝和焊接铁磁钢管(埋弧焊除外)验证水压试验的自动电磁检测
Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.
NF A49-875-2-2000
钢管的无损检测 第2部分:无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)验证水压试验的自动涡流检测
Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness.
NF A49-875-3-2000
钢管的无损检测 第3部分:探测无缝和焊接钢管(埋弧焊除外)不完整性的自动涡流检测
Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.
NF A49-875-4-2000
钢管的无损检测 第4部分:探测无缝铁磁钢管横向不完整性的自动全圆周磁探头/磁漏检测
Non-destructive testing of steel tubes - Part 4 : automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections.
NF A49-875-5-2000
钢管的无损检测 第5部分:探测无缝和焊接(除埋弧焊)铁磁钢管纵向不完整性的自动全圆周磁探头/漏磁检测
Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections.
NF A49-875-12-2000
钢管的无损检测 第12部分:探测无缝和焊接铁磁钢管表面不完整性的磁粉检验
Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.
NF A49-875-18-2000
钢管的无损检测 第18部分:探测无缝和焊接铁磁钢管管端层状不完整性的磁粉检验
Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.
NF A89-550-1998
焊缝的无损检验 焊缝的磁粉检验
Non-destructive examination of welds - Magnetic particle examination of welds.
NF A89-550/A1-2002
焊缝的无损检测
焊缝的磁粉检测
Non-destructive testing of welds - Magnetic particle testing of welds.
NF A89-551-1998
焊缝的无损检验
焊缝的磁粉检测 验收等级
Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.
NF A89-551/A1-2002
焊缝的无损检测
焊缝的磁粉检测 验收等级
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels.
NF A91-112-1995
磁性基体上的非磁性涂层
涂层厚度测量 磁性法
Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.
NF A91-113-1995
非磁性基体金属上的非导电涂层
涂层厚度测量 涡流法
Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.
NF A91-120-1995
磁性和非磁性基体上的镍电镀层
镀层厚度测量 磁性法
Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method.
NF F01-141-1987
铁路车辆 传动齿轮
Rolling stock. Running gear. Magnetoscopic examination.
гост 19793-74
磁力探伤机及磁化设备一般技术要求
гост 21105-75
磁粉检测方法
ПИ1.2.238-83
材料与零件质量的涡流无损检测
РТМ1.2.020-81
航空零件的磁粉法检验