请问戴尔笔记本指示灯闪烁电脑指示灯不亮然后出现一行英文no bootable devices strike f1

Your question
&&&how do I start my Acer laptop what it says no bootable device please restart&
either your hard drive has failed or the cmos has got corrupted.
(CMOS memory stores information about hardware and which device to boot up from)
Do you have a DVD drive ?
if so insert a bootable CD or DVD disk (Windows disk ?) and see what happens.
If no DVD drive make a bootable usb memory stick with Windows on it.
Check in bios /uefi
the hard drive is detected and what boot order is set to.
CD then hard drive is ok if
drive exists
If this is a very new laptop ask the supplier for help
(as this problem should not happen unless you dropped the laptop or subjected laptop to impact or vibration while switched on)
Mike Barnes
hello Mike
I have an ACER aspire 2508 it was on and my cat drop it, now I have this problem, I turn it on and it says ¨no bootable device¨ what should i do? I'm desesperate
please help!!
Grace Guerra Tobar
- Tech Support
- Tech Support
- Tech Support
- Tech Support
- Tech Support
Can't find your answer ? Ask !
How do you make a bootable usb memory stick??
I had the same problem on my Acer Aspire Switch 10 2-in-1 portable. And I found a simple solution that likely will work for you and want to share here.
The trick normally is to reset the computer by removing the battery. But the battery is sealed and I could not get to it! So what I did was to let "no bootable device found....." screen on overnight, until the next morning when the internal battery drains out and computer is cold. It worked when I restart the pc with external DC charger applied!
I disconnected the hard and reinserted it and it works like normal.....very easy!
the remove & insert the hard drive may well work.
I was helping an old man who dropped his laptop 3 times over a 4 month period
The first 2 times the drive came out of the SATA socket and worked when re inserted.
The third time the hard disk suffered physical damage and had to be replaced.
Mike Barnes
Grace Guerra said:hello Mike
I have an ACER aspire 2508 it was on and my cat drop it, now I have this problem, I turn it on and it says ¨no bootable device¨ what should i do? I'm desesperate
please help!!
Grace Guerra Tobar
The issue is you have to change to Legacy BIOS from UEFI BIOS.
Go to the BIOS settings once the laptop/computer starts and this would then fix your issue
Hope that helps
Dungaxx said:Hi
The issue is you have to change to Legacy BIOS from UEFI BIOS.
Go to the BIOS settings once the laptop/computer starts and this would then fix your issue
Hope that helps
in my laptop i dont have any legacy bios settings acer aspire timelinex 4830tg
Can't find your answer ? Ask !
Related resources
More resources
Read discussions in other Laptop Tech Support categories
Ask the community
Top Experts Apps
americanaudiophile
6732 messages since 8/26/08
96 messages since 10/4/16
31 messages since 2/18/16
All badges
Forum help
Latest Reports
Follow Tom’s guide
Subscribe to our newsletter
add to twitter
add to facebook
ajouter un flux RSS

我要回帖

更多关于 戴尔笔记本指示灯含义 的文章

 

随机推荐