水性汽车漆用氨基树脂 - 新闻信息 - CYTEC氰特-湛新Allnex氨基树脂
美国氰特公司的氨基树脂业务于2013年独立成美国湛新ALLNEX公司，其余业务也在2016年被索尔维集团收购。
目前，翁开尔保持作为氨基树脂业务华南指定代理商，服务华南、中南、西南等地区客户；作为全国范围表面活性剂业务指定代理商，代理乳化剂、润湿剂。
----请点击选择----
Keim-Additec·中国
EuroCeras·中国
Silcona·中国
《中华人民共和国电信与信息服务业务经营许可证》编号：粤ICP备号MTK6580(Android6.0)-使用DTS注册平台设备、匹配平台驱动_android开发_ThinkSAAS
MTK6580(Android6.0)-使用DTS注册平台设备、匹配平台驱动
MTK6580(Android6.0)-使用DTS注册平台设备、匹配平台驱动
内容来源： 网络
一、初始化device tree
file:kernel-3.18/init/main.c
asmlinkage __visible void __init start_kernel(void)
setup_arch(&command_line);
file:kernel-3.18/arch/arm64/kernel/setup.c
void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
文件：kernel-3.18/drivers/of/fdt.c
* unflatten_device_tree - create tree of device_nodes from flat blob
* unflattens the device-tree passed by the firmware, creating the
* tree of struct device_node. It also fills the "name" and "type"
* pointers of the nodes so the normal device-tree walking functions
* can be used.
void __init unflatten_device_tree(void)
__unflatten_device_tree(initial_boot_params, &of_allnodes,
early_init_dt_alloc_memory_arch);
/* Get pointer to "/chosen" and "/aliases" nodes for use everywhere */
of_alias_scan(early_init_dt_alloc_memory_arch);
其中of_allnodes的类型为struct device_node ,各成员解析如下：
struct device_node {
const char *－－－－－－－－－－－－－－－－－－－－－－device node name
const char *－－－－－－－－－－－－－－－－－－－－－－－对应device_type的属性
－－－－－－－－－－－－－－－－－－－－－－－对应该节点的phandle属性
const char *full_ －－－－－－－－－－－－－－－－从“/”开始的，表示该node的full path
struct property *－－－－－－－－－－－－－该节点的属性列表
struct property * －－－－－－－－－－如果需要，删除某些属性，并挂入到deadprops的列表
struct device_node *－－－－－－parent、child以及sibling将所有的device node连接起来
struct device_node *
struct device_node *
struct device_node * －－－－－－－－通过该指针可以获取相同类型的下一个node
struct device_node *－－－－－－－通过该指针可以获取node global list下一个node
struct proc_dir_entry *－－－－－－－－开放到userspace的proc接口信息
－－－－－－－－－－－－－该node的reference count
unsigned long _
void *
file:kernel-3.18/drivers/of/fdt.c
* __unflatten_device_tree - create tree of device_nodes from flat blob
* unflattens a device-tree, creating the
* tree of struct device_node. It also fills the "name" and "type"
* pointers of the nodes so the normal device-tree walking functions
* can be used.
* @blob: The blob to expand
* @mynodes: The device_node tree created by the call
* @dt_alloc: An allocator that provides a virtual address to memory
* for the resulting tree
static void __unflatten_device_tree(void *blob,
struct device_node **mynodes, //mynodes 为全局链表
void * (*dt_alloc)(u64 size, u64 align))
void *
struct device_node **allnextp =
pr_debug(" -& unflatten_device_tree()n");
if (!blob) {
pr_debug("No device tree pointern");
pr_debug("Unflattening device tree:n");
pr_debug("magic: %08xn", fdt_magic(blob));
pr_debug("size: %08xn", fdt_totalsize(blob));
pr_debug("version: %08xn", fdt_version(blob));
if (fdt_check_header(blob)) {
pr_err("Invalid device tree blob headern");
/* First pass, scan for size */
start = 0;
size = (unsigned long)unflatten_dt_node(blob, NULL, &start, NULL, NULL, 0);
size = ALIGN(size, 4);
pr_debug("
size is %lx, allocating...n", size);
/* Allocate memory for the expanded device tree */
mem = dt_alloc(size + 4, __alignof__(struct device_node));
memset(mem, 0, size);
*(__be32 *)(mem + size) = cpu_to_be32(0xdeadbeef);
pr_debug("
unflattening %p...n", mem);
/* Second pass, do actual unflattening */
start = 0;
unflatten_dt_node(blob, mem, &start, NULL, &allnextp, 0);
if (be32_to_cpup(mem + size) != 0xdeadbeef)
pr_warning("End of tree marker overwritten: %08xn",
be32_to_cpup(mem + size));
*allnextp = NULL;
pr_debug(" &- unflatten_device_tree()n");
* unflatten_dt_node - Alloc and populate a device_node from the flat tree
* @blob: The parent device tree blob
* @mem: Memory chunk to use for allocating device nodes and properties
* @p: pointer to node in flat tree
* @dad: Parent struct device_node
* @allnextpp: pointer to -&allnext from last allocated device_node
* @fpsize: Size of the node path up at the current depth.
static void * unflatten_dt_node(void *blob,
void *mem,
int *poffset,
struct device_node *dad,
struct device_node ***allnextpp,
unsigned long fpsize)
const __be32 *p;
struct device_node *
struct property *pp, **prev_pp = NULL;
const char *
unsigned int l,
static int depth = 0;
int old_
int has_name = 0;
int new_format = 0;
pathp = fdt_get_name(blob, *poffset, &l);
if (!pathp)
allocl = l++;
/* version 0x10 has a more compact unit name here instead of the full
* path. we accumulate the full path size using "fpsize", we&ll rebuild
* it later. We detect this because the first character of the name is
* not &/&.
if ((*pathp) != &/&) {
new_format = 1;
if (fpsize == 0) {
/* root node: special case. fpsize accounts for path
* plus terminating zero. root node only has &/&, so
* fpsize should be 2, but we want to avoid the first
* level nodes to have two &/& so we use fpsize 1 here
fpsize = 1;
allocl = 2;
l = 1;
pathp = "";
} else {
/* account for &/& and path size minus terminal 0
* already in &l&
fpsize +=
allocl =
np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
__alignof__(struct device_node));
if (allnextpp) {
char *
of_node_init(np);
np-&full_name = fn = ((char *)np) + sizeof(*np);
if (new_format) {
/* rebuild full path for new format */
if (dad && dad-&parent) {
strcpy(fn, dad-&full_name);
#ifdef DEBUG
if ((strlen(fn) + l + 1) != allocl) {
pr_debug("%s: p: %d, l: %d, a: %dn",
pathp, (int)strlen(fn),
l, allocl);
#endif
fn += strlen(fn);
*(fn++) = &/&;
memcpy(fn, pathp, l);
prev_pp = &np-&
**allnextpp =
*allnextpp = &np-&
if (dad != NULL) {
np-&parent =
/* we temporarily use the next field as `last_child&*/
if (dad-&next == NULL)
dad-&child =
dad-&next-&sibling =
dad-&next =
/* process properties */
for (offset = fdt_first_property_offset(blob, *poffset);
(offset &= 0);
(offset = fdt_next_property_offset(blob, offset))) {
const char *
if (!(p = fdt_getprop_by_offset(blob, offset, &pname, &sz))) {
offset = -FDT_ERR_INTERNAL;
if (pname == NULL) {
pr_info("Can&t find property name in list !n");
if (strcmp(pname, "name") == 0)
has_name = 1;
pp = unflatten_dt_alloc(&mem, sizeof(struct property),
__alignof__(struct property));
if (allnextpp) {
/* We accept flattened tree phandles either in
* ePAPR-style "phandle" properties, or the
* legacy "linux,phandle" properties.
If both
* appear and have different values, things
* will get weird.
Don&t do that. */
if ((strcmp(pname, "phandle") == 0) ||
(strcmp(pname, "linux,phandle") == 0)) {
if (np-&phandle == 0)
np-&phandle = be32_to_cpup(p);
/* And we process the "ibm,phandle" property
* used in pSeries dynamic device tree
* stuff */
if (strcmp(pname, "ibm,phandle") == 0)
np-&phandle = be32_to_cpup(p);
pp-&name = (char *)
pp-&length =
pp-&value = (__be32 *)p;
*prev_pp =
prev_pp = &pp-&
/* with version 0x10 we may not have the name property, recreate
* it here from the unit name if absent
if (!has_name) {
const char *p1 = pathp, *ps = pathp, *pa = NULL;
while (*p1) {
if ((*p1) == &@&)
pa = p1;
if ((*p1) == &/&)
ps = p1 + 1;
p1++;
if (pa & ps)
pa = p1;
sz = (pa - ps) + 1;
pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
__alignof__(struct property));
if (allnextpp) {
pp-&name = "name";
pp-&length =
pp-&value = pp + 1;
*prev_pp =
prev_pp = &pp-&
memcpy(pp-&value, ps, sz - 1);
((char *)pp-&value)[sz - 1] = 0;
pr_debug("fixed up name for %s -& %sn", pathp,
(char *)pp-&value);
if (allnextpp) {
*prev_pp = NULL;
np-&name = of_get_property(np, "name", NULL);
np-&type = of_get_property(np, "device_type", NULL);
if (!np-&name)
np-&name = "";
if (!np-&type)
np-&type = "";
old_depth =
*poffset = fdt_next_node(blob, *poffset, &depth);
if (depth & 0)
depth = 0;
while (*poffset & 0 && depth & old_depth)
mem = unflatten_dt_node(blob, mem, poffset, np, allnextpp,
fpsize);
if (*poffset & 0 && *poffset != -FDT_ERR_NOTFOUND)
pr_err("unflatten: error %d processing FDTn", *poffset);
二、具体创建platform device的过程
file:kernel-3.18/arch/arm64/kernel/setup.c
//系统调用of_platform_populate
static int __init arm64_device_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
return 0;
arch_initcall_sync(arm64_device_init); //arch_initcall_sync为宏函数，这里可以理解为module的加载（和module_init类似）
file:kernel-3.18/drivers/of/platform.c
* of_platform_populate() - Populate platform_devices from device tree data
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table, NULL to use the default
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent to hook devices from, NULL for toplevel
* Similar to of_platform_bus_probe(), this function walks the device tree
* and creates devices from nodes.
It differs in that it follows the modern
* convention of requiring all device nodes to have a &compatible& property,
* and it is suitable for creating devices which are children of the root
* node (of_platform_bus_probe will only create children of the root which
* are selected by the @matches argument).
* New board support should be using this function instead of
* of_platform_bus_probe().
* Returns 0 on success, & 0 on failure.
int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent)
struct device_node *
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
if (rc)
of_node_put(root);
file:kernel-3.18/drivers/of/base.c
static struct device_node *__of_find_node_by_path(struct device_node *parent,
const char *path)
struct device_node *
int len = strchrnul(path, &/&) -
if (!len)
return NULL;
__for_each_child_of_node(parent, child) {
const char *name = strrchr(child-&full_name, &/&);
if (WARN(!name, "malformed device_node %sn", child-&full_name))
name++;
if (strncmp(path, name, len) == 0 && (strlen(name) == len))
return NULL;
在这个函数中有一个很关键的全局变量：allnodes，它的定义是在 drivers/of/base.c 里面,struct device_node *这应该所就是那个所谓的“device tree data”
了。它应该指向了 device tree 的根节点。我们知道 device tree 是由 DTC（Device Tree Compiler）编译成二进制文件DTB（Ddevice Tree Blob）的，然后在系统上电之
后由bootloader加载到内存中去，这个时候还没有device tree，而在内存中只有一个所谓的 DTB，这只是一个以某个内存地址开始的一堆原始的dt数据，没有树结构。kernel
的任务需要把这些数据转换成一个树结构然后再把这棵树的根节点的地址赋值给allnodes就行了。这个过程一定是非常重要，因为没有这个 device tree 那所有的设备就没办
法初始化，所以这个 dt 树的形成一定在kernel 刚刚启动的时候就完成了。
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
* @matches: match table for bus nodes
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent for new device, or NULL for top level.
* @strict: require compatible property
* Creates a platform_device for the provided device_node, and optionally
* recursively create devices for all the child nodes.
static int of_platform_bus_create(struct device_node *bus,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent, bool strict)
const struct of_dev_auxdata *
struct device_node *
struct platform_device *
const char *bus_id = NULL;
void *platform_data = NULL;
int rc = 0;
/* Make sure it has a compatible property */
if (strict && (!of_get_property(bus, "compatible", NULL))) { //没有compatible直接返回
pr_debug("%s() - skipping %s, no compatible propn", 
__func__, bus-&full_name);
return 0;
auxdata = of_dev_lookup(lookup, bus); //在传入lookup table寻找和该device node匹配的附加数据 
if (auxdata) {
bus_id = auxdata-&
platform_data = auxdata-&platform_
if (of_device_is_compatible(bus, "arm,primecell")) {
* Don&t return an error here to keep compatibility with older
* device tree files.
of_amba_device_create(bus, bus_id, platform_data, parent);
return 0;
/*这个函数是真正生成struct device的地方*/
dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
/*如果compatible属性不是"simple-bus"和"arm,amba-bus"则在返回，不继续遍历子节点。
这里我的理解是"simple-bus"和"arm,amba-bus"这两种设备不具备热插拔能力，因此在这里就先创建了struct device*/
for_each_child_of_node(bus, child) {
pr_debug("
create child: %sn", child-&full_name);
rc = of_platform_bus_create(child, matches, lookup, &dev-&dev, strict);
if (rc) {
of_node_put(child);
of_node_set_flag(bus, OF_POPULATED_BUS);
* of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @platform_data: pointer to populate platform_data pointer with
* @parent: Linux device model parent device.
* Returns pointer to created platform device, or NULL if a device was not
* registered.
Unavailable devices will not get registered.
static struct platform_device *of_platform_device_create_pdata(
struct device_node *np,
const char *bus_id,
void *platform_data,
struct device *parent)
struct platform_device *
if (!of_device_is_available(np) ||
of_node_test_and_set_flag(np, OF_POPULATED))
return NULL;
/* of_device_alloc除了分配struct platform_device的内存，还分配了该platform device需要的resource的内存
（参考struct platform_device 中的resource成员）。当然，这就需要解析该device node的interrupt资源以及
memory address资源,这些资源的原始数据都来自dtb中。*/
dev = of_device_alloc(np, bus_id, parent);
if (!dev)
goto err_clear_
of_dma_configure(&dev-&dev);
dev-&dev.bus = &platform_bus_
//设置匹配方式
dev-&dev.platform_data = platform_
/* We do not fill the DMA ops for platform devices by default.
* This is currently the responsibility of the platform code
* to do such, possibly using a device notifier
if (of_device_add(dev) != 0) {
////把这个device加入到设备模型中，后续驱动注册的时候就可以匹配到了
platform_device_put(dev);
goto err_clear_
err_clear_flag:
of_node_clear_flag(np, OF_POPULATED);
return NULL;
file:kernel-3.18/drivers/of/device.c
int of_device_add(struct platform_device *ofdev)
BUG_ON(ofdev-&dev.of_node == NULL);
/* name and id have to be set so that the platform bus doesn&t get
* confused on matching */
ofdev-&name = dev_name(&ofdev-&dev);
ofdev-&id = -1;
/* device_add will assume that this device is on the same node as
* the parent. If there is no parent defined, set the node
* explicitly */
if (!ofdev-&dev.parent)
set_dev_node(&ofdev-&dev, of_node_to_nid(ofdev-&dev.of_node));
return device_add(&ofdev-&dev);
file:kernel-3.18/drivers/base/core.c
* device_add - add device to device hierarchy.
* @dev: device.
* This is part 2 of device_register(), though may be called
* separately _iff_ device_initialize() has been called separately.
* This adds @dev to the kobject hierarchy via kobject_add(), adds it
* to the global and sibling lists for the device, then
* adds it to the other relevant subsystems of the driver model.
* Do not call this routine or device_register() more than once for
* any device structure.
The driver model core is not designed to work
* with devices that get unregistered and then spring back to life.
* (Among other things, it&s very hard to guarantee that all references
* to the previous incarnation of @dev have been dropped.)
Allocate
* and register a fresh new struct device instead.
* NOTE: _Never_ directly free @dev after calling this function, even
* if it returned an error! Always use put_device() to give up your
* reference instead.
int device_add(struct device *dev)
struct device *parent = NULL;
struct kobject *
struct class_interface *class_
int error = -EINVAL;
dev = get_device(dev);
if (!dev)
if (!dev-&p) {
error = device_private_init(dev);
if (error)
* for statically allocated devices, which should all be converted
* some day, we need to initialize the name. We prevent reading back
* the name, and force the use of dev_name()
if (dev-&init_name) {
dev_set_name(dev, "%s", dev-&init_name);
dev-&init_name = NULL;
/* subsystems can specify simple device enumeration */
if (!dev_name(dev) && dev-&bus && dev-&bus-&dev_name)
dev_set_name(dev, "%s%u", dev-&bus-&dev_name, dev-&id);
if (!dev_name(dev)) {
error = -EINVAL;
goto name_
pr_debug("device: &%s&: %sn", dev_name(dev), __func__);
parent = get_device(dev-&parent);
kobj = get_device_parent(dev, parent);
if (kobj)
dev-&kobj.parent =
/* use parent numa_node */
if (parent)
set_dev_node(dev, dev_to_node(parent));
/* first, register with generic layer. */
/* we require the name to be set before, and pass NULL */
error = kobject_add(&dev-&kobj, dev-&kobj.parent, NULL);
if (error)
goto E
/* notify platform of device entry */
if (platform_notify)
platform_notify(dev);
error = device_create_file(dev, &dev_attr_uevent);
if (error)
goto attrE
if (MAJOR(dev-&devt)) {
error = device_create_file(dev, &dev_attr_dev);
if (error)
goto ueventattrE
error = device_create_sys_dev_entry(dev);
if (error)
goto devtattrE
devtmpfs_create_node(dev);
error = device_add_class_symlinks(dev);
if (error)
goto SymlinkE
error = device_add_attrs(dev);
if (error)
goto AttrsE
error = bus_add_device(dev);
if (error)
goto BusE
error = dpm_sysfs_add(dev);
if (error)
goto DPME
device_pm_add(dev);
/* Notify clients of device addition.
This call must come
* after dpm_sysfs_add() and before kobject_uevent().
if (dev-&bus)
blocking_notifier_call_chain(&dev-&bus-&p-&bus_notifier,
BUS_NOTIFY_ADD_DEVICE, dev);
kobject_uevent(&dev-&kobj, KOBJ_ADD);
bus_probe_device(dev); //------------very important----------------
if (parent)
klist_add_tail(&dev-&p-&knode_parent,
&parent-&p-&klist_children);
if (dev-&class) {
mutex_lock(&dev-&class-&p-&mutex);
/* tie the class to the device */
klist_add_tail(&dev-&knode_class,
&dev-&class-&p-&klist_devices);
/* notify any interfaces that the device is here */
list_for_each_entry(class_intf,
&dev-&class-&p-&interfaces, node)
if (class_intf-&add_dev)
class_intf-&add_dev(dev, class_intf);
mutex_unlock(&dev-&class-&p-&mutex);
done:
put_device(dev);
DPMError:
bus_remove_device(dev);
BusError:
device_remove_attrs(dev);
AttrsError:
device_remove_class_symlinks(dev);
SymlinkError:
if (MAJOR(dev-&devt))
devtmpfs_delete_node(dev);
if (MAJOR(dev-&devt))
device_remove_sys_dev_entry(dev);
devtattrError:
if (MAJOR(dev-&devt))
device_remove_file(dev, &dev_attr_dev);
ueventattrError:
device_remove_file(dev, &dev_attr_uevent);
attrError:
kobject_uevent(&dev-&kobj, KOBJ_REMOVE);
kobject_del(&dev-&kobj);
Error:
cleanup_device_parent(dev);
if (parent)
put_device(parent);
name_error:
kfree(dev-&p);
dev-&p = NULL;
EXPORT_SYMBOL_GPL(device_add);
file：kernel-3.18/drivers/base/bus.c
* bus_add_device - add device to bus
* @dev: device being added
* - Add device&s bus attributes.
* - Create links to device&s bus.
* - Add the device to its bus&s list of devices.
int bus_add_device(struct device *dev)
struct bus_type *bus = bus_get(dev-&bus);
int error = 0;
if (bus) {
pr_debug("bus: &%s&: add device %sn", bus-&name, dev_name(dev));
error = device_add_attrs(bus, dev);
if (error)
goto out_
error = device_add_groups(dev, bus-&dev_groups);
if (error)
goto out_
error = sysfs_create_link(&bus-&p-&devices_kset-&kobj,
&dev-&kobj, dev_name(dev));
if (error)
goto out_
error = sysfs_create_link(&dev-&kobj,
&dev-&bus-&p-&subsys.kobj, "subsystem");
if (error)
goto out_
klist_add_tail(&dev-&p-&knode_bus, &bus-&p-&klist_devices);
return 0;
out_subsys:
sysfs_remove_link(&bus-&p-&devices_kset-&kobj, dev_name(dev));
out_groups:
device_remove_groups(dev, bus-&dev_groups);
out_id:
device_remove_attrs(bus, dev);
out_put:
bus_put(dev-&bus);
file:kernel-3.18/drivers/base/core.c
int device_add_groups(struct device *dev, const struct attribute_group **groups)
return sysfs_create_groups(&dev-&kobj, groups);
三、匹配平台驱动
file:kernel-3.18/drivers/base/bus.c
* bus_probe_device - probe drivers for a new device
* @dev: device to probe
* - Automatically probe for a driver if the bus allows it.
void bus_probe_device(struct device *dev)
struct bus_type *bus = dev-&
struct subsys_interface *
if (!bus)
if (bus-&p-&drivers_autoprobe) {
ret = device_attach(dev);
WARN_ON(ret & 0);
mutex_lock(&bus-&p-&mutex);
list_for_each_entry(sif, &bus-&p-&interfaces, node)
if (sif-&add_dev)
sif-&add_dev(dev, sif);
mutex_unlock(&bus-&p-&mutex);
file:kernel-3.18/drivers/base/dd.c
* device_attach - try to attach device to a driver.
* @dev: device.
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
* Returns 1 if the device w
* 0 if no match
* -ENODEV if the device is not registered.
* When called for a USB interface, @dev-&parent lock must be held.
int device_attach(struct device *dev)
int ret = 0;
device_lock(dev);
if (dev-&driver) {
if (klist_node_attached(&dev-&p-&knode_driver)) {
ret = 1;
goto out_
ret = device_bind_driver(dev);
if (ret == 0)
ret = 1;
else {
dev-&driver = NULL;
ret = 0;
} else {
ret = bus_for_each_drv(dev-&bus, NULL, dev, __device_attach);
pm_request_idle(dev);
out_unlock:
device_unlock(dev);
file:kernel-3.18/drivers/base/dd.c
static int __device_attach(struct device_driver *drv, void *data)
struct device *dev =
if (!driver_match_device(drv, dev))
return 0;
return driver_probe_device(drv, dev);
file:kernel-3.18/drivers/base/base.h
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
return drv-&bus-&match ? drv-&bus-&match(dev, drv) : 1;
file:kernel-3.18/drivers/base/dd.c
* driver_probe_device - attempt to bind device & driver together
* @drv: driver to bind a device to
* @dev: device to try to bind to the driver
* This function returns -ENODEV if the device is not registered,
* 1 if the device is bound successfully and 0 otherwise.
* This function must be called with @dev lock held.
When called for a
* USB interface, @dev-&parent lock must be held as well.
int driver_probe_device(struct device_driver *drv, struct device *dev)
int ret = 0;
if (!device_is_registered(dev))
return -ENODEV;
pr_debug("bus: &%s&: %s: matched device %s with driver %sn",
drv-&bus-&name, __func__, dev_name(dev), drv-&name);
pm_runtime_barrier(dev);
ret = really_probe(dev, drv);
pm_request_idle(dev);
static int really_probe(struct device *dev, struct device_driver *drv)
int ret = 0;
int local_trigger_count = atomic_read(&deferred_trigger_count);
atomic_inc(&probe_count);
pr_debug("bus: &%s&: %s: probing driver %s with device %sn",
drv-&bus-&name, __func__, drv-&name, dev_name(dev));
WARN_ON(!list_empty(&dev-&devres_head));
dev-&driver =
/* If using pinctrl, bind pins now before probing */
ret = pinctrl_bind_pins(dev);
if (ret)
goto probe_
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failedn",
__func__, dev_name(dev));
goto probe_
if (dev-&bus-&probe) {
ret = dev-&bus-&probe(dev);
if (ret)
goto probe_
} else if (drv-&probe) {
ret = drv-&probe(dev);
if (ret)
goto probe_
driver_bound(dev);
ret = 1;
pr_debug("bus: &%s&: %s: bound device %s to driver %sn",
drv-&bus-&name, __func__, dev_name(dev), drv-&name);
probe_failed:
devres_release_all(dev);
driver_sysfs_remove(dev);
dev-&driver = NULL;
dev_set_drvdata(dev, NULL);
if (ret == -EPROBE_DEFER) {
/* Driver requested deferred probing */
dev_info(dev, "Driver %s requests probe deferraln", drv-&name);
driver_deferred_probe_add(dev);
/* Did a trigger occur while probing? Need to re-trigger if yes */
if (local_trigger_count != atomic_read(&deferred_trigger_count))
driver_deferred_probe_trigger();
} else if (ret != -ENODEV && ret != -ENXIO) {
/* driver matched but the probe failed */
printk(KERN_WARNING
"%s: probe of %s failed with error %dn",
drv-&name, dev_name(dev), ret);
} else {
pr_debug("%s: probe of %s rejects match %dn",
drv-&name, dev_name(dev), ret);
* Ignore errors returned by -&probe so that the next driver can try
* its luck.
ret = 0;
done:
atomic_dec(&probe_count);
wake_up(&probe_waitqueue);
在platform_driver 的注册中，将drv-&driver.probe赋值为platform_drv_probe
file:kernel-3.18/drivers/base/platform.c
* __platform_driver_register - register a driver for platform-level devices
* @drv: platform driver structure
* @owner: owning module/driver
int __platform_driver_register(struct platform_driver *drv,
struct module *owner)
drv-&driver.owner =
drv-&driver.bus = &platform_bus_
if (drv-&probe)
drv-&driver.probe = platform_drv_
if (drv-&remove)
drv-&driver.remove = platform_drv_
if (drv-&shutdown)
drv-&driver.shutdown = platform_drv_
return driver_register(&drv-&driver);
在platform_drv_probe 中调用drv-&probe(dev)也就是platform_driver的probe,到此平台的驱动和设备的匹配已经完成
static int platform_drv_probe(struct device *_dev)
struct platform_driver *drv = to_platform_driver(_dev-&driver);
struct platform_device *dev = to_platform_device(_dev);
ret = of_clk_set_defaults(_dev-&of_node, false);
if (ret & 0)
ret = dev_pm_domain_attach(_dev, true);
if (ret != -EPROBE_DEFER) {
ret = drv-&probe(dev);
if (ret)
dev_pm_domain_detach(_dev, true);
if (drv-&prevent_deferred_probe && ret == -EPROBE_DEFER) {
dev_warn(_dev, "probe deferral not supportedn");
ret = -ENXIO;
四、总结
其实引入dts机制后，总线设备如platform bus,i2c bus 的注册，直接从从dts中解析设备资源，之后注册设备流程和先前设备注册大同小异，而驱动注册和加载以及设备、
驱动的匹配和先前没有区别。也就是说，Linux核心思想设备、驱动、总线关系没有改变，改变只是一小部分实现形式而已。dts在新版内核已经完全支持，对于我们普通的
内核驱动开发人员来说，只需要了解其简单的dts节点规则， 设备驱动匹配规则，能够熟练的从dts中解析数据等(当然这不是本章内容)。
ps:dts 的注册平台设备和匹配平台驱动的流程和很简单，具体实现细节十分麻烦，例如它用C语言进行的许多解析操作，涉及到繁琐算法，本篇不作分析。
PHP开发框架
开发工具/编程工具
服务器环境
ThinkSAAS商业授权：
ThinkSAAS为用户提供有偿个性定制开发服务
ThinkSAAS将为商业授权用户提供二次开发指导和技术支持
让ThinkSAAS更好，把建议拿来。
开发客服微信